Βάση μοτέρ συρτής για καγιάκ της Wilderness Systems

Brand:Wilderness Systems

3.6/5

Ft
146.80

Η βάση στήριξης κινητήρα συρτής γενικής χρήσης Wilderness Systems σάς επιτρέπει να εγκαταστήσετε εύκολα ένα μοτέρ συρτής τύπου clamp-on με έως και 3 H.P. σε σένα καγιάκ. Το δημοφιλές μοτίβο μπουλονιών 4 οπών συνδέεται απευθείας στην πρύμνη επιλεγμένων μοντέλων καγιάκ Wilderness Systems ή μπορεί να ταιριάζει ρετρό σε μοντέλα με επαρκείς θέσεις επιφανειών τοποθέτησης. Μπορεί να συνδυαστεί με πλάκες στήριξης Wilderness Systems Stern για να φιλοξενήσει τα μοντέλα Radar και ATAK. Αυτό το κιτ δεν είναι «έτοιμο για εγκατάσταση». Θα απαιτηθεί κάποια εγκατάσταση DIY. Ενδέχεται να απαιτείται πρόσθετο υλικό και εξαρτήματα ανάλογα με τη θέση τοποθέτησης. Η χρήση πλάκας στήριξης συνιστάται ιδιαίτερα εάν η πρόσβαση επιτρέπει (Δεν περιλαμβάνεται). Συμβατότητα σκάφους Κάθε σκάφος με επίπεδο σημείο στην πρύμνη αρκετά μεγάλο για στύλο τροφοδοσίας. Το σχέδιο ορθογώνιας οπής είναι 3,75" x 4,75"• Συμβατότητα Confluence kayako Perception – Pilot, Outlawo Wilderness Systems – RADAR 115/135, ATAK 120/140 (με προσθήκη πλάκας στερέωσης πρύμνης) o Wilderness Systems – RECON προσθήκη πλάκας (με άνοδο αλλά απαιτεί διάτρηση, υλικό και DIY)

Βάρος βραχίονα: 2,7 λίβρες. Διαστάσεις βραχίονα: (Μ) 8,59” x (Π) 8,78” x (Υ) 3,95”. Μέγιστη συνιστώμενη χωρητικότητα βάρους 45 λίβρες. Συνιστάται για κινητήρες συρτής με έως 3 ίππους ή/και ώση 70 λίβρες. Μπορεί να μην λειτουργεί με σκάφη με θέση τοποθέτησης σε εσοχή λόγω διαφορών στα καλούπια και τις εγκοπές. Σχεδιασμένο για κάθε σκάφος με ένα επίπεδο σημείο στην πρύμνη αρκετά μεγάλο για στύλο ρεύματος. Το ορθογώνιο σχέδιο οπών στερέωσης είναι 3,75 x 4,75”. Κατασκευή βαρέως τύπου από ανοξείδωτο χάλυβα 13 διαμετρημάτων. Μέγιστη ώθηση κινητήρα συρτής 36 λίβρες. Η πλάκα στήριξης Marine Board διατηρεί τον σφιγκτήρα κινητήρα σφιχτό και ασφαλή. Στήριγμα κινητήρα συρτής τραβέρσας για ηλεκτρικούς κινητήρες συρτής με σφιγκτήρα.
Brand Wilderness Systems
Brand ‎Wilderness Systems
Brand Name ‎Wilderness Systems
Color Silver
Color ‎Silver
Customer Reviews 4.5 4.5 out of 5 stars 131 ratings 4.5 out of 5 stars
Fuel Type ‎Electric
Included Components ‎Motor mount, Screws
Item Dimensions LxWxH ‎8.6 x 8.8 x 4 inches
Item Package Dimensions L x W x H ‎9.33 x 9.21 x 5.79 inches
Item Weight 2.7 Pounds
Item Weight ‎2.7 Pounds
Manufacturer ‎Confluence Outdoors
Material Stainless Steel
Material ‎Stainless Steel
Model Name ‎Trolling Motor Mount
Model Year ‎2020
Mounting Type ‎Transom
Number of Items ‎1
Operation Mode Electric
Operation Mode ‎Electric
Package Weight ‎1.58 Kilograms
Part Number ‎8070085
Recommended Uses For Product ‎For Salt Water
Size ‎One Size
Suggested Users ‎Unisex-adult
Warranty Description ‎1 year Warranty

3.6

9 Review
5 Star
77
4 Star
8
3 Star
7
2 Star
4
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Aaron Taylor
Unfinished product
It does work. But it's not a finished product. You'll have to make a spacer because the metal is too thin and you'll want a back plate, which it doesn't come with. The screws it comes with are too short as well so it's just a pain. That being said, I am happy with the end product. It's probably worth more like $50.
Scritto da: Sam4040
Solid mount
It is very sturdy, I highly recommend it.
Scritto da: Athanasios Lagos
I like it, could be better
Too small for motor clamp. Had to modify.
Scritto da: Brian Williams
Motor mount
Aligned perfectly with the holes in my Kayak. Very sturdy fir my 2.5 Mercury Outboard
Scritto da: Pen Name
Works good but expensive but no other options
Solid built but thought expensive for what you get. Also, my rear mount trolling motor, the bolts to connect, run right into the units bolt...it works but makes it less stable
Scritto da: Domingo
Great product
Great fit for my kayak. It's a precetion outlaw 11.5 and it's made for a trolling motor. So I purchased this and great fit and sturdy. I did have to cut a small block of wood to make up for the space so the trolling motor would tighten down.
Scritto da: John Paciulli
You need blocking for this to work
The clamp on most trolling motors do not close enough to tighten on the mount. You have to fashion a block of 5/4 as a shim
Scritto da: Adam Neat
Thin, cheaply made
Very thin and cheaply made, sorry i waited too long to return it. Comparing it to the Newport in the pics. The Newport is better made. Lower price
Scritto da: James sherriff
Where the motor mounts onto this part its not wide enough
Part where electic motor mounts on It is not wide enough for clamps

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array