Σετ ράγας κλειδιού χαμηλού προφίλ ERNST αντιολισθητικό, 30 εργαλείων, κόκκινο (6050-A)

Brand:Ernst Manufacturing

2.6/5

Ft
47.91

Ανακινήστε το κουτί σας όσο θέλετε, οι ράγες κλειδιού χαμηλού προφίλ Ernst χωρίς ολίσθηση δεν κινούνται ούτε ίντσα. Το υλικό υψηλής πρόσφυσης από καουτσούκ εξαλείφει την ανάγκη για ακριβούς μαγνήτες. Εύκολη μεταφορά από συρτάρι σε συρτάρι. Τέλεια εφαρμογή για όλα τα συρτάρια, ακόμα και τα πιο ρηχά. Όλα τα κλειδιά είναι στραμμένα προς τα εμπρός σε ομοιόμορφη σειρά για εύκολη αναγνώριση των μεγεθών και τυχόν εργαλείων που λείπουν. Έρχεται με δύο ράγες διαμόρφωσης προς τα εμπρός και δύο προς τα πίσω για να μεγιστοποιήσετε τη χρήση χώρου στα συρτάρια σας. Ανθεκτικό σε καύσιμα και διαλύτες. Φτιαγμένο στις ΗΠΑ. Δεν περιλαμβάνονται εργαλεία.

Κατασκευασμένο στις ΗΠΑ, εγγύηση εφ' όρου ζωής, τα εργαλεία δεν περιλαμβάνονται. Περιλαμβάνει δύο ράγες διαμόρφωσης προς τα εμπρός και δύο προς τα πίσω για μεγιστοποίηση του χώρου. Κατασκευασμένο από ελαστικό υλικό υψηλής πρόσφυσης. Χωράει 30 κλειδιά. μεταφέρεται εύκολα από συρτάρι σε συρτάρι. Αντιολισθητικές ράγες κλειδιού χαμηλού προφίλ για κιβώτια εργαλείων.
Batteries Required? ‎No
Brand Ernst Manufacturing
Brand ‎Ernst Manufacturing
Color Red 2022
Color ‎Red 2022
Country of Origin ‎USA
Customer Reviews 3.5 3.5 out of 5 stars 5 ratings 3.5 out of 5 stars
Finish ‎Powder Coated
Finish Type ‎Powder Coated
Head Style ‎Flat
Included Components ‎No-Slip Low-Profile Wrench Rail Set
Item Dimensions LxWxH 15.75 x 0.75 x 0.75 inches
Item Dimensions LxWxH ‎15.75 x 0.75 x 0.75 inches
Item model number ‎6050-A
Item Package Quantity ‎1
Item Weight 0.4 Pounds
Item Weight ‎0.4 Pounds
Item Weight ‎6.4 ounces
Manufacturer ‎Ernst Manufacturing
Material Plastic
Material ‎Plastic
Operation Mode ‎Mechanical
Part Number ‎6050-A
Product Dimensions ‎15.75 x 0.75 x 0.75 inches
Style ‎30 Tool
Warranty Description ‎Lifetime Limited Warranty

2.6

1 Review
5 Star
38
4 Star
0
3 Star
36
2 Star
26
1 Star
0

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Buzzy
Good but not great
It is far too expensive for what it is and the prices has increased 50-odd percent in recent weeks since I purchased mine! As had been said elsewhere about similar rests, it doesn't hold the tools well. All of the spaces are the same size, which is not right for any screwdriver set, and they tend to roll around inside it to some extent. For bigger drivers it works pretty well but, as they get smaller, it doesn't. It also assumes that all drivers are the same length, which of course they aren't. You either need the rests too close together for longer drivers or too far apart for shorter ones. It's too long for a lot of drawers. I cut mine so that I have two runs in the one drawer. One positive is that it is easy enough to cut but be very careful when you do it. You need to cut through the right peaks on each side so that you leave half of the material on each part of each rail as the same peak will form the sides of two spaces on each side, one handle rest and one blade rest. If you cut beside a peak, you will lose a slot. That said, I did manage to cut mine successfully and I am using them for a range of drivers, doubling up some of the smaller ones with some medium-sized ones that fit together in one rest slot. All in all it's overpriced and a poor solution not well executed. I looked long and hard, though, but didn't find a better option. What we need is a tapered rest with varying sized spaces simlar to a spanner rack and, yes, I did consider using those, too but they're not a workable solution. I may make something myself at some stage but, for now, it works well enough and is at least one step better than having the screwdrivers rolling around all over the place.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array