Ροδάκια RWM - SWB-3512-06 Signature Premium Rubber Wheel, Precision Ball Bearing, 225 lbs Capacity, 3,5 Wheel, Dia, 1-1/4 Wheel Width, 1-5/8 Plate Length 3,5 Diameter x 1-1/

Brand:RWM Casters

3.6/5

Ft
33.43

Το RWM Casters Signature Premium Wheel έχει ελαφρύ, ενισχυμένο πυρήνα από νάιλον με ελαστομερές ελαστικό πέλμα υψηλής αντοχής χωρίς σημάδι. Το στρογγυλό πέλμα παρέχει εύκολη κύλιση. Ο ανθεκτικός πυρήνας από νάιλον είναι έξι φορές ισχυρότερος από το πολυπροπυλένιο. Το ελαστικό πέλμα απόδοσης είναι κομμένο, ανθεκτικό στο σχίσιμο και στη διάβρωση και δεν θα κοπεί. Έχει την υψηλότερη αναλογία αντοχής προς βάρος από οποιονδήποτε άλλο τροχό στη βιομηχανία. Η Signature Premium Wheel είναι εξαιρετική για προστασία δαπέδου, συνεχή ρυμούλκηση και μείωση θορύβου.

Βάρος συσκευασίας αντικειμένου: 1,0 λίβρες Διαστάσεις συσκευασίας αντικειμένου: 10,0 L x 8,0 Π x 6,5 Υ. Τροχός υψηλής ποιότητας υπογραφής με σφραγισμένο ρουλεμάν ακριβείας. 3,5 Διάμετρος άξονα, μήκος πλήμνης 1-5/8, χωρητικότητα 225 λίβρες.
Brand RWM Casters
Color Metal
Item model number SWB-3512-06
Item Weight 0.01 Ounces
Manufacturer RWM Casters Co.
Material Rubber on Nylon
Package Dimensions 3.5 x 3.5 x 2 inches; 0.01 Ounces
Unit Count 1.0 Count

3.6

8 Review
5 Star
71
4 Star
18
3 Star
5
2 Star
3
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Blackhawk
Very sturdy
Very sturdy and well made wheels. They worked exactly as I needed them to.
Scritto da: Ananth
Worthwhile
I've had a set of the 5"x2" wheels for about a year. I use them on a tool chest in an industrial workplace. They have been durable, roll smoothly even while bearing significant weight, and they don't become embedded with metal debris off the hangar floor. I found out about them from a coworker who had the 8"x2" versions. He's gotten similar good results. If I was looking for casters for another tool chest, these are the ones I'd get.
Scritto da: C. Vance
10mm axle diameter.
I ordered the 4" diameter x 1-1/4 width wheels. They're very well made but the description is incorrect. The axle diameter is NOT 3/8" inches. It's 10mm. I discovered this when I went to the hardware store to buy bolts to mound these. I ordered two wheels. Each wheel has two bushings, one on each side. Of the four bushings, three were 10mm. The forth is slightly smaller so I'll have to drill or ream it out to 10mm.
Scritto da: Doug Maloof
These are great wheels!
These wheels fit perfect into the casters on my lift. I am very pleased with the fit and finish, very good.
Scritto da: Mikhail Trubin
Quality is good but description is misleading.
This a good wheel, with two good bearings for each wheel. I have seen some reviews describing as unusable, due to small size for the shaft. True that. The size is weird. The bearing inner opening is 0.6”, but it comes with an insert, making a hole 0.4”. I bought two to use on a 1/2” shaft. So as is it would not work out. I had to drill out the inserts (there is two per wheel) to make it right. At the end it’s all good, but if you need a wheel for 1/2” shaft, and don’t want to spend time on it, look elsewhere.
Scritto da: Geo
Fits the Original HealthRider !
I was a bit lucky. I had just bought an old HealthRider exercise machine, with a worn-out-as-hell glider wheel. I suspect that that the wheel had been replaced once already, and the replacement was not rated for much weight - so it was visibly worn and had a lumpy feel to the movement. Well, not only did this new 3.5" Wheel fit perfectly, it is MUCH smoother. It is rated for 225 lbs as well, so it's beefier than the one that came off. And, at less that $10 to buy, and only about 3 minutes to replace the old one. Thanks, RWM, for publishing the complete and correct specs - made it easy to pick the right one.
Scritto da: Timothy Jenquin
These are amazing! We bought a set of 4 to replace ...
These are amazing! We bought a set of 4 to replace the original wheels on a large cart that is nearly 700 lbs loaded. The originals were not up to the task, likely because we were using it outside on rough surfaced concrete and over curb ramps. After careful consideration this seemed like the best option that fit our casters. After a week I can already tell these will more than meet our needs. They have not shown any signs of degradation, and roll much easier. It feels like half the weight now. One note, the bearing mounts are 2.5", so make sure they'll fit in your caster if you're looking for 2" wheels. Luckily mine just fit.
Scritto da: Amazon Customer
Golf
They work perfectly to modify an electric golf bag cart.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array