POWERTEC 20304-P2 Σφιγκτήρας εναλλαγής γρήγορης απελευθέρωσης POWERTEC 20304-P2 302F - Χωρητικότητα συγκράτησης 300 lbs, 2 PK 302F, 2PK

Name: POWERTEC 20304-P2 Σφιγκτήρας εναλλαγής γρήγορης απελευθέρωσης POWERTEC 20304-P2 302F - Χωρητικότητα συγκράτησης 300 lbs, 2 PK 302F, 2PK
Brand: POWERTEC
SKU: 0843441121152
Price: 46.19 HUF
Availability: InStock

Brand:POWERTEC

3.7/5

Ft
46.19

ΠΡΟΔΙΑΓΡΑΦΕΣ ΜΕΓΕΘΟΣ: Συνολικό μέγεθος: 160 x 55 x 85 mm/6,3 x 2,2 x 3,3 Μέγεθος σπειρώματος βίδας: 8 x 29 mm/0,3 x 1,1 διαδρομή εμβόλου 32 mm/ 1,3. ΧΩΡΗΤΙΚΟΤΗΤΑ ΚΡΑΤΗΣΗΣ: 136 kg / 300 lbs. PREMIUM ΣΧΕΔΙΑΣΜΟΣ: Αυτός ο σφιγκτήρας εναλλαγής ταχείας απελευθέρωσης είναι εξοπλισμένος με βάση με φλάντζα, κόκκινη αντιολισθητική χειρολαβή βινυλίου και είναι κατασκευασμένος από χάλυβα ψυχρής έλασης - σοφά επικαλυμμένος με υψηλής ποιότητας επίστρωση ψευδαργύρου για αντισκωριακή, χωρίς διάβρωση και μεγάλη διάρκεια αντοχή. ΛΕΙΤΟΥΡΓΙΑ: Ένας βασικός μεσαίου μεγέθους ίσιος σφιγκτήρας βραχίονα που είναι συμβατός με κινητές βάσεις, σέικες και εξαρτήματα και είναι ιδανικός για όταν το έργο επεξεργασίας ξύλου απαιτεί να στερεωθεί το τεμάχιο εργασίας σας σε κάθετη θέση. ΠΕΡΙΛΑΜΒΑΝΕΙ: (2) Σφιγκτήρας εναλλαγής ώθησης έλξης (βαρέως τύπου) με ρυθμιζόμενη βίδα M8 και μπουλόνι.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0843441121152

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Εργαλεία συγκράτησης, Εργαλεία χειρός, Σφιγκτήρες, Toggle Clamps,

Batteries Required?	‎No
Brand	POWERTEC
Color	Red
Color	‎Red
Country of Origin	‎Taiwan
Customer Reviews	4.6 4.6 out of 5 stars 359 ratings 4.6 out of 5 stars
Included Components	‎INCLUDES:
Item Dimensions LxWxH	8.3 x 6 x 4.4 inches
Item model number	‎20304-P2
Item Package Quantity	‎1
Item Weight	‎1.34 pounds
Manufacturer	‎POWERTEC
Part Number	‎20304-P2
Product Dimensions	‎8.3 x 6 x 4.4 inches
Style	302F, 2PK
Style	‎302F, 2PK
Tensile Strength	300 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: J. Russo

Great clamp

Used this clamp to make a pen press. Works great

Scritto da: gary

good clamp

works good for me

Scritto da: Gary from Nebraska

Just what I needed to save $70+

I used the small Kreg pocket hole jig ($18) and this clamp ($7.50) to replicate a $100 jig

Scritto da: Charles E. Rehberg

Good strength

Good strength so far to hold what I am using them for. I wish they came with a rubber tip but I got sone rubber stoppers and just drilled them out to fit over the head of the bolts. Seem to work fine. For twice the money I coukd get one with the rubber tip.

Scritto da: Richard Lopez

Great clamps

These clamps work great. They hold great pressure if installed correctly

Scritto da: Eric S Dean

Parts are good after getting past lost package

It was great apart from the delay from lost package

Scritto da: Ross

Good enough

These are good and they work well enough, but the fit between the plunger and the sleeve is looser than on the same type of clamps I bought from Xpaowa: https://www.amazon.com/XRPAOWA-Toggle-Release-Holding-Capacity/dp/B07214XRR1 The smoothness also wasn't quite as good. There seemed to be less lubrication, and it was more sticky. As a result the plunger is a little more wobbley, and needs a little more force when extending and retracting. It still works, it just doesn't feel as nice. I figured it was all the same part made in the same factory, but I guess there are subtle differences. Another thing to note is that these have a 5/16-18 thread, rather than the 8mm thread on the Xrpaoa model. That all said it still worked for my application, and it still holds well enough.

Scritto da: Mike Pennacchi

Worked great for supporting end of gate!

Not the typical use for this clamp. Needed a way to support the end of a large gate. This clamp worked perfectly! Plenty of clamping strength to lift and support the gate. Easy to adjust. May need to paint, since it's outside.

Scritto da: jim todd

it is perfect

nothing to dislike

Scritto da: d thompson

handy

screw it down or weld it

Scritto da: Amazon Customer

Work as expected

Easy to mount, and they work well, but the size is smaller than the website leads you to expect. Would get a slightly larger size for preference.

Scritto da: Darren Gerbrandt

Works

Needed a lever to use for a stamp I made for my wife's soap business. I was able to design and attach the stamp to the end of this toggle clamp and it all works perfectly for her. While not the intended application for this product it's much easier on her hands to push the lever instead of using brute force to push down on the stamp.

Scritto da: Kim

One of the two toggle clamps was defective

I received the toggle clamps yesterday and after unpackaging them, one worked fine, but the second one was defective. It doesn't work in the vertical position, which is the way I need to use it. The handle is too loose and won't stay clamped because gravity pulls it down. The clamp that works, the handle has a detente in the clamped position so it won't release in the vertical position. I would have preferred to contact the seller directly rather than leaving a bad review as I would still be interested in the product if the seller replaces them for two good ones. But unfortunately, I couldn't find anywhere a link where I can contact the seller, so I decided to put a review instead. I will be returning the product and asking for a replacement.