Neiko 10052A Σημειακά τρυπάνια συγκόλλησης, κοβαλτοχάλυβας υψηλής ταχύτητας με επίστρωση τιτανίου

Brand:Neiko

3.3/5

Ft
39.48

Υψηλής ποιότητας κατασκευή, αυτό το τρυπάνι σημειακής συγκόλλησης είναι κατασκευασμένο από HSCo με επίστρωση τιτανίου για μεγάλη διάρκεια ζωής και ανθεκτικό στη θερμότητα. Η μύτη 8 mm είναι συμβατή με τα περισσότερα τρυπάνια συγκόλλησης και διαθέτει επίπεδο άξονα για σίγουρο κράτημα, με αιχμή για ακριβή εκτέλεση και αφαίρεση.

Δεν υπάρχουν διαθέσιμες μονάδες
[ΑΚΡΙΒΕΙΑ]: Ο σχεδιασμός του άκρου πιλότου με μύτη αυξάνει την ακρίβεια και αποτρέπει την ολίσθηση όταν κρατιέται κάτω για λόγους σήμανσης. [ΥΠΕΡ ΒΑΘΜΟΣ]: Η επίπεδη επιφάνεια εδάφους στο κάτω μισό του μύτη παρέχει πρόσθετη αντοχή και συγκράτηση τσοκ σε οποιοδήποτε τρυπάνι συγκόλλησης. [ΑΝΘΕΚΤΙΚΟ]: Η ανθεκτική στη θερμότητα επίστρωση τιτανίου αντέχει στη διάτρηση μετάλλου και ξύλου υψηλής απόδοσης όταν χρησιμοποιείται σε περιβάλλοντα υψηλής θερμοκρασίας. [ΒΑΡΕΙΑ ΚΑΤΑΣΤΑΣΗ]: Το μείγμα κοβαλτίου από χάλυβα υψηλής ταχύτητας ειδικής ποιότητας είναι σχεδιασμένο για μεγάλη διάρκεια ζωής για να αντέχει σε γρήγορο ρυθμό λειτουργίας. [ΕΦΑΡΜΟΓΗ]: Χρησιμοποιήστε αυτό το τρυπάνι σημείων συγκόλλησης για να διαχωρίσετε τις σημειακές συγκολλήσεις και τα πάνελ συγκόλλησης σημείου αντίστασης χωρίς να παραμορφώσετε τη λαμαρίνα.
Brand Neiko
Finish Type Titanium
Item Dimensions LxWxH 0.39 x 2.01 x 0.39 inches
Item model number 10052A
Manufacturer Ridgerock Tools Inc.
Material Cobalt
Product Dimensions 0.39 x 2.01 x 0.39 inches; 0.32 Ounces
Shank Type Straight

3.3

12 Review
5 Star
67
4 Star
13
3 Star
9
2 Star
5
1 Star
7

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: buddy
Bit quality
I used this bit and it worked great on the first few spot welds. Bit got dull pretty quickly
Scritto da: Layla
Works fine, seemed to dull after a dozen or so uses
Worked fine for my project, but felt like it was getting a little dull towards the end. Had to remove about 14 spot welds.
Scritto da: Rob M
Decent for the price
Pay attention to the listing pictures - this bit is SHORT! I had to drill at a slight angle that I wasn't anticipating expecting a standard length bit. I drilled 10 spot welds slowly stopping to oil the bit along the way. By the last two holes you could tell it was starting to wear hence the 4 star rating.
Scritto da: Trever Loynd
Buy Two
Great price for a spot weld drill bit, but it burns up fast. You'll want to buy two or three to get a bigger job done. This bit is also extremely short! Good for flat areas, but can't reach in corners very well.
Scritto da: Harry S
Really Works Good!
This drill bit worked really well for me. I had tried various types of other spot weld cutters, mostly the hole saw style and this is by far superior. This drill bit does not wander nearly as much as other cutters I have tried. I only used to drill out about 50 spot welds so I can confirm longevity but for the price just by a couple of them if you have a big job.
Scritto da: Antonio
REMOVING SPOT WELDS
TOOL WORKED GREAT, WILL BUY AGAIN
Scritto da: Sapling
Great Bits
I'm a bodyman, I've used many different spot weld bits and I've gotten more holes out of these than just about any other
Scritto da: Ignacio castellano
El precio está bien. Pero no sirve para trabajos grandes.
No sirve para trabajos grandes.
Scritto da: Amazon Customer
Tip broke off on the 5 th spot weld
Tip broke off on the 5th spot weld i will be returning
Scritto da: Ed Tyslau
garbage
After 6 welds were cut out the bit was so dull I threw it out. Worst purchase ever.
Scritto da: Hebe Olga de Souza
PÉSSIMA
Péssima, quebrou no segundo uso, qualidade abaixo de qualquer crítica.
Scritto da: Duncan K.
Save your money, its junk
Lasted for 2 spot welds and then the pilot tip broke off, now its useless

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array