Μαύρο Stallion Ανδρικό μακρυμάνικο 3X-Large Royal Blue,μπλε

Brand:Black Stallion

3.6/5

Ft
99.11

Χαρακτηριστικά προϊόντος: Ο γιακάς συγκόλλησης όρθιος προστατεύει από ιπτάμενους σπινθήρες Γλιστράει εύκολα πάνω από τα ρούχα Κρυφή τσέπη με φερμουάρ Ανθεκτική στη φλόγα, ελαφρύ βαμβάκι Εκτεταμένο μήκος μπροστά Μοντέλο # BXRB9C-M , Μέγεθος: Μεσαίο Περιγραφή προϊόντος: Φτάνοντας σε ένα νέο επίπεδο στην καινοτομία, το BSX Το Welding Jacket χρησιμοποιεί μοντέρνο σχεδιασμό για να δημιουργήσει μια καλύτερη εφαρμογή, καλύτερη εμφάνιση και πιο άνετο προστατευτικό ένδυμα. Η Black Stallion δημιούργησε ένα ανθεκτικό στη φλόγα βαμβακερό τζάκετ συγκόλλησης. Το σακάκι διαθέτει όρθιο γιακά για να προστατεύει τον λαιμό του συγκολλητή από εγκαύματα, εκτεταμένο μήκος μπροστά για περισσότερη προστασία, χωρίς ανοιχτές τσέπες όπου μπορούν να προσγειωθούν σπινθήρες και να αναφλεγούν και ρυθμιζόμενους ιμάντες μέσης για πιο εφαρμοστή εμφάνιση. Αν ψάχνετε για υπέροχο μπουφάν συγκόλλησης, αυτό είναι το σακάκι για εσάς! ΠΡΟΕΙΔΟΠΟΙΗΣΗ: Αυτό το προϊόν μπορεί να σας εκθέσει σε χημικές ουσίες που [είναι] γνωστό στην Πολιτεία της Καλιφόρνια ότι προκαλούν καρκίνο και γενετικές ανωμαλίες ή άλλη αναπαραγωγική βλάβη. Για περισσότερες πληροφορίες μεταβείτε στο www. P65 Προειδοποιήσεις. περ. gov.

Βασιλικό μπλε με γραφικά φλόγας σε αντίθεση. Βολικό κούμπωμα μπροστά και καρπούς. Ρυθμιζόμενοι ιμάντες μέσης. Κολάρο Standup Welder με ρυθμιζόμενες επιλογές κουμπώματος. 9 ουγκιές. ανθεκτικό στη φλόγα επεξεργασμένο βαμβάκι. Μόνο πλύσιμο χεριών. Κλείσιμο με κούμπωμα. Βαμβακερή επένδυση. Βαμβάκι.
Department unisex-adult
Manufacturer Black Stallion

3.6

8 Review
5 Star
77
4 Star
13
3 Star
5
2 Star
2
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Alfredo Marquez-Miranda
Buena compra
Lo que esperaba…
Scritto da: Robbie Kent
Nice product, size runs small
A little tight for a 3XL, and little heavier than i expected so wasnt comfortable wearing during the warmer month in Wisconsin. I use it for MIG welding and the forearms unfortunately dont provide great protection from spatter. Otherwise it is a good quality product. Update: after 1st wash, it shrunk to fit more like a 2xl and now is too tight for me to wear.
Scritto da: Harry Flora
Order one size larger.
Good quality welding shirt but I recommend ordering a size up.
Scritto da: Logan Payne
Quality
I’ve had this welding jacket for about 4 months now and it has multiple holes in the sleeves from hot sparks and slag while welding, I’m worried about the quality of this jacket due to my arm(s) getting burnt
Scritto da: Elizabeth
Tuxedo of welding jackets.
If you’re a welder, this review is what you need to know. What you’re probably looking for: -light weight -comfortable -something to make you look good but not “I’m trying too hard” -protects you from spatter while keeping you cool. The pros: What you’re probably looking for: -light weight -comfortable -has an adjustable waist strap, one button to give a sexy fitted look, and another to loosen it after lunch. -makes you look good but not “I’m trying too hard” -kind of protects you from spatter* while keeping you cool. *Before I list the cons, please understand that there is not a jacket on the market that will stop molten metal from dripping through. You’re a welder. You’re going to get bit by spatter. But you’re a welder. You should know that. I just can’t believe the amount of people docking a star or two for thinking it was made of diamonds? The cons: -the neck button minutely of sucks to button. You have to pinch it between your finger and collarbone because you can’t a finger in there. -the flames are dumb but whatever. -I only have one of these. I wish I had 5. Shut up and buy it. Best twenty something bucks I’ve spent.
Scritto da: Chris Neill
I liked it but shrunk
I really liked the shirt but air dry it cause it dies shrink
Scritto da: JAKE H.
This welding jacket is worth every penny!
So I've been welding for many years now. I have always tried to use protective gear. If anyone has done any welding back in the day. They know that the gear was thick and heavy. Now with this Revco BSX BXRB9C Welding Coat Jacket is light weight, flexible, comfortable, and durable. I know that this jacket is labeled fire resistant, but you never know until it has been tested. To my surprise I never ment to test it this way. I was welding up some galvanize gates and noticed that my arm was getting a little warm then hot. To my amazement I had (1) dime size and (2) pencil eraser size slags smoldering on my sleeve. To my amazement it never burnt through. So for what I spent for this Jacket it is with every penny and saved a trip to the emergency room.
Scritto da: Fred Berfel
Nice heavy weight denim. Sturdy snaps.
Very nice shirt overall for a welding shirt. I wear a 16.5 x 34” dress shirt and this fits very well with easy flexibility. My son has worn it as well and he is more like a skinnier large size and he likes the fit too. Good long tail for tucking. Only had it 3 months, but I really like the feel. I wish it didn’t have the 50 cent piece sized black stallion logo on the arm, but I suppose if you removed the stitches before the first wash nobody would ever have know it was there. Still, for a purpose built shirt I guess I can’t fault them for advertising...at least it isn’t embroidered.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array