HHIP 2006-0085 15/16-1-1/16 Χάλυβας υψηλής ταχύτητας Ρυθμιζόμενης λεπίδας, 6 λεπίδες, 9 OAL, μέγεθος H H (15/16-1-1/16) HHIP Adj. Reamers

Brand:HHIP

3.2/5

Ft
46.41

H 15/16-1-1/16 Ρυθμιζόμενη λεπίδα από χάλυβα υψηλής ταχύτητας ~ Οι ίσιες ράβδοι φλάουτου θα πρέπει να χρησιμοποιούνται μόνο σε εφαρμογές με οπές. ~ Οι λεπίδες ρυθμίζονται χαλαρώνοντας το ένα παξιμάδι και σφίγγοντας το άλλο. ~ Κάθε κοπτήρας επεκτείνεται στο επόμενο μέγεθος. ~ Οι ρυθμιζόμενες λεπίδες δίνουν στον χειριστή τη δυνατότητα να χειρίζεται πολλαπλά μεγέθη οπών με ένα μόνο εργαλείο, καθιστώντας τες μια καλή επιλογή για χρήστες με χαμηλές ανάγκες ανανέωσης όγκου. ~ Το τετράγωνο άκρο επιτρέπει στο χρήστη να περιστρέφει τη μηχανή με το χέρι με ρυθμιζόμενο κλειδί ή κλειδί με ευθεία λαβή. ~ Το συνολικό μήκος είναι 9. ~ 6 λεπίδες. ~ Το μήκος κοπής είναι 2,95.

Δεν υπάρχουν διαθέσιμες μονάδες
Το τετράγωνο άκρο επιτρέπει στο χρήστη να περιστρέφει τη μηχανή με το χέρι με ρυθμιζόμενο κλειδί ή κλειδί με ευθεία λαβή. Οι ρυθμιζόμενες λεπίδες δίνουν στον χειριστή τη δυνατότητα να χειρίζεται πολλαπλά μεγέθη οπών με ένα μόνο εργαλείο. Το Reamer επεκτείνεται στο επόμενο μέγεθος. Οι λεπίδες ρυθμίζονται χαλαρώνοντας το ένα παξιμάδι και σφίγγοντας το άλλο. Τα ίσια φλάουτα θα πρέπει να χρησιμοποιούνται μόνο σε εφαρμογές με οπές.
Item model number 2006-0085
Manufacturer ABS Import Tools Inc.
Product Dimensions 9 x 6 x 6 inches; 14.82 Ounces

3.2

13 Review
5 Star
57
4 Star
24
3 Star
4
2 Star
5
1 Star
11

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: YT
Works
It works as it should I was able to enlarge 2 bike frames’ aluminum seat tube from 27.0 to 27.2. But the user must know how to use these readers carefully. But similar to what another reviewer said, there are probably a lot more expensive but better made reamers out there. But for what I needed it to do, I took my time and it worked well.
Scritto da: Linus and Luna of Santa Cruz, CA
Well Made Reamer
This is an adjustable reamer that works well. It has a nice lead on the end of the cutter to help align the reamer and get the cut started. The adjustment mechanism is solid and works smoothly. The machining is not as nice as some of my older USA made tools but for the task at hand it was the correct tool and the right price.
Scritto da: Man
worked like a charm
Perfect, I was able to ream out a 304 stainless steel tube with this, in order to fit acme lead screw inside. I will probably never use this tool again so for a one-time use, it was perfect. Can't say much beyond that.
Scritto da: Road Runner
Low Quality Junk
Don't waste your money. This is a low quality tool. If you do use one check the diameter across the 3 sets of blades carefully. Mine has one set of blades measure about .008" larger that the other two. One set of blades do all of the cutting. Nearly useless.
Scritto da: Bea Devine
reamer
tractor seat bushings it work out real nice thanks
Scritto da: Hector J Medina G
Good tool, but it adjusts differently from the usual ...
Good tool, but it adjusts differently from the usual reamers. Good for through holes. You might be better off looking for the traditional ones if you are operating in a blind or semi-blind hole.
Scritto da: Richard
Worked as expected
No problems, easy to adjust, don't use it a lot so I don't know about how long the blades stay sharp, but did ream out 4 pieces of 1" pipe for drive shaft installation 2 inches deep
Scritto da: amberger
Nope
Blades flex in grooves and there is .010" variation. Not accurate for cutting wrist pin bushings.
Scritto da: Richard
It does what it supposed to do.
Great reamer, simple to use, can be as delicate as you need to be depending on the material. What a hard slog cutting steel, however I am sure cast or brass would be a lot easier.
Scritto da: Mar
Escariador
He intentado alisar un agujero de dos cms. de profundidad para insertar un eje y NO corta , no hace nada de nada, NO arranca ninguna viruta, al no cortar se atasca, NO tienen filo, y si lo tenian al primer intento de alisamiento lo ha perdido... Nada que ver con un escariador fijo. Calidad pésima. La idea es buena pero las cuchillas que trae son blandas... UNA PENA.
Scritto da: ALO
Surprised at quality
I've only used one so far but it cuts fine in aluminum. Used to make a hole bigger to fit a bushing.
Scritto da: Amazon Customer
Not great quality but gets the job done.
Not a high quality tool but worked for reaming a few bushings to size. A bit hard to adjust and the blades are not parallel to the axis so you get a slight taper in the finished size. I did not expect too much for price.
Scritto da: kyle pennington
Good price
Did what needed to do

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array