Drill America - DWTHXNPT-Σετ 6 τεμαχίων NPT Pipe Die Set, 1/8, 1/4, 3/8, 1/2, 3/4 and 1, Rethreading, Carbon Steel, Ξύλινη θήκη

Name: Drill America - DWTHXNPT-Σετ 6 τεμαχίων NPT Pipe Die Set, 1/8, 1/4, 3/8, 1/2, 3/4 and 1, Rethreading, Carbon Steel, Ξύλινη θήκη
Brand: Drill America
SKU: 0887861293976
Price: 148.66 HUF
Availability: InStock

Brand:Drill America

3.7/5

Ft
148.66

Συμπεριλαμβανόμενα εξαρτήματα: 6 τεμάχια εξαγωνικές μήτρες σωλήνων. Ιδανικό για συντήρηση στο κατάστημα ή στο χωράφι. Δεν απαιτείται ειδική θήκη για αυτόν τον τύπο μήτρας, αρκεί οποιοδήποτε κλειδί αρκετά μεγάλο. Το εξάγωνο καλούπι είναι για ντύσιμο πάνω από μελανιασμένα ή σκουριασμένα νήματα. Τα δεξιόστροφα εργαλεία κοπής έχουν δράση κοπής που εμπλέκεται όταν λειτουργούν με τη φορά των δεικτών του ρολογιού. Κατασκευασμένο από ανθρακούχο χάλυβα. Σετ 6 τεμαχίων από ανθρακούχο χάλυβα NPT Hex Die.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0887861293976

Κατηγορίες Βιομηχανικά & Επιστημονικά, Εργαλεία κοπής, Dies, Μηχανήματα κοπής σπειρωμάτων από χάλυβα,

Brand	Drill America
Item Dimensions LxWxH	8 x 6 x 4 inches
Item model number	DWTHXNPT-SET
Manufacturer	Drill America
Material	Carbon Steel
Product Dimensions	8 x 6 x 4 inches; 2.98 Pounds
Sheet Count	6

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: fenx1200

Good Value for The Money.

I am doing some plumbing around the house and I had to buy this set to run through the threads of the copper fittings that I am buying from Home Depot. Since the copper fittings are made in China, they are substandard and low quality. Having damaged copper fittings will ruin your plumbing projects really quick. These are life savers.

Scritto da: Charles B. Grissom

Perfect pipe thread chaser

Eventhough I had a Ridgid pipe threading kit, I encountered some galvanized pipes that had "grown" in diameter as rust had formed. The threads needed to be chased for new end fittings, but my pipe threader would not fit over the pipe b/c of the rust. The pipe chasers in this kit were perfect for the job.

Scritto da: Donald W. Christensen Jr.

Buy it right buy it once...

Go big or go home ... some times your set just doesn’t cover all the bases. This is a nice edition to a large set, may not use it a lot but at least I have what it takes. Very good quality in a nice storage case. I bought both the tap set and the die set. 6 ⭐️⭐️⭐️⭐️⭐️⭐️‘S

Scritto da: jose martins

I very happy with the if I need I ll buy at again

Scritto da: Darcia Helle

Great Quality Set

I got this for my husband. Here's what he had to say: This is a very nice set of dies. Great for repairing damaged threads, or cutting threads if you are using softer material. They are nonadjustable and have a hexagon exterior. So you can turn these with an adjustable wrench. No need for the expensive die handle. This set is right-hand only. With any die, I suggest a little bit of oil on the work piece so you don't heat up and chip off the cutting edges of the die. The wooden case is an added bonus that most manufactures are straying away from.

Scritto da: Sadie Parker

5 star

I was so excited when I was offered the chance to review this die set! This isn't something that you would need often but when you do its great to have it on hand. The die set is very nice and it is easy to use with any adjustable wrench that you have and it is perfect for repairing and retreading screws that have been stripped. I am very happy with this set.

Scritto da: Mom2three

Great to have when you need them

These aren't something my husband is going to use very often, but he did have a bolt that got cross-threaded and this tool came in very handy. They come in a nice wood box, don't require a die handle to turn, and seem to be well made.

Scritto da: Kenneth Pippin

There good quality

I have used them to clean up threads on iron pipe they do a good job