CURT 55513 Προσαρμοσμένη πλεξούδα καλωδίωσης τρέιλερ 4 ακίδων Vehicle-Side, Select Toyota Tacoma, T100, Hilux , Μαύρο

Brand:CURT

3.8/5

Ft
93.04

Εάν το όχημά σας δεν είναι εξοπλισμένο με καλωδιώσεις για τη ρυμούλκηση τρέιλερ, η προσαρμοσμένη καλωδίωση CURT είναι η ιδανική λύση. Μια προσαρμοσμένη πλεξούδα καλωδίωσης -- που ονομάζεται επίσης βύσμα T -- είναι μια απλή ηλεκτρική συσκευή plug-and-play που συνδέεται στο ηλεκτρικό σύστημα του αυτοκινήτου σας και παρέχει μια τυπική, καθολική σύνδεση καλωδίωσης τρέιλερ. Αυτό γίνεται με χρήση δύο ή περισσότερων συνδετήρων συμβατών με OEM ειδικά για το όχημα για σύνδεση στο συγκρότημα του πίσω φανού, εξαλείφοντας την ανάγκη για κοπή, μάτισμα και συγκόλληση κατά την εγκατάσταση. Οι προσαρμοσμένες καλωδιώσεις είναι ειδικά σχεδιασμένες για το όχημα και, ενώ δεν είναι διαθέσιμες για όλα τα οχήματα, προσφέρουν έναν από τους ταχύτερους, ευκολότερους και ασφαλέστερους τρόπους καλωδίωσης ενός οχήματος για ρυμούλκηση. Αυτή η συγκεκριμένη πλεξούδα σύνδεσης παρέχει μια επίπεδη υποδοχή σύνδεσης 4 κατευθύνσεων και έχει σχεδιαστεί για να είναι μια προσαρμοσμένη πλεξούδα καλωδίωσης που ταιριάζει σε ορισμένα χρόνια των Toyota Tacoma, T100 και Hilux (για να επαληθεύσετε τη συμβατότητα του οχήματός σας, δείτε πληροφορίες εφαρμογής). Συνοδεύεται από όλα τα απαραίτητα εξαρτήματα καλωδίωσης για τη δημιουργία αξιόπιστης σύνδεσης καλωδίωσης ρυμουλκούμενου, καθώς και κάλυμμα σκόνης για να διατηρείται ο σύνδεσμος καθαρός όταν δεν χρησιμοποιείται. Έχετε στο μυαλό σας μια εικόνα του επόμενου προορισμού σας -- ίσως είναι το σκάφος που προσγειώνεται στο αγαπημένο σας σημείο ψαρέματος, ίσως είναι ένα κάμπινγκ που έχει θέα σε ένα από τα αριστουργήματα της φύσης ή ίσως είναι το επόμενο μεγάλο εργοτάξιο. Ωστόσο, η μετατροπή αυτής της εικόνας σε πραγματικότητα απαιτεί περισσότερα από μια απλή ονειροπόληση. Χρειάζεται μια σταθερή σύνδεση και τη σωστή ποσότητα ισχύος. Η προσαρμοσμένη καλωδίωση CURT είναι κατασκευασμένη με μερικές από τις πιο εξελιγμένες τεχνολογίες του κλάδου και έχει σχεδιαστεί για εύκολη εγκατάσταση, παρέχοντάς σας ηλεκτρική σύνδεση μεγάλης διάρκειας για τη ρύθμιση του κοτσαδόρου ρυμούλκησης.

Δεν υπάρχουν διαθέσιμες μονάδες
ΚΑΛΥΜΜΑ ΓΙΑ ΤΗ ΣΚΟΝΗ. Για να προωθήσετε τη μακροχρόνια χρήση και την αντοχή στις καιρικές συνθήκες, αυτή η 4πολική καλωδίωση φωτισμού τρέιλερ διαθέτει κάλυμμα από καουτσούκ για τη σκόνη. Προσαρμόζεται εύκολα στην επίπεδη υποδοχή 4 κατευθύνσεων όταν δεν χρησιμοποιείται, προστατεύοντάς την από τα εξωτερικά στοιχεία. ΑΞΙΟΠΙΣΤΗ ΙΣΧΥ. Αυτή η πλεξούδα καλωδίωσης τρέιλερ 4 κατευθύνσεων είναι κατασκευασμένη με τεχνολογία επιφανειακής τοποθέτησης. Αυτός ο τύπος κυκλώματος παράγει λιγότερη θερμότητα, βέλτιστη ένταση φωτός και ανθεκτική απόδοση. ΕΙΔΙΚΟ ΟΧΗΜΑ. Αυτή η πλεξούδα καλωδίωσης μετά την αγορά, οχήματος-ρυμουλκούμενου είναι σχεδιασμένη για επιλεγμένα χρόνια των Toyota Tacoma, T100 και Hilux. ΣΤΑΝΤΑΡ ΣΥΝΔΕΣΗ. Αυτή η plug-in καλωδίωση ρυμουλκούμενου 4 επιπέδων μπορεί να χρησιμοποιηθεί για τη σύνδεση πίσω φώτων τρέιλερ, φώτων φρένων και φλας. Η καλωδίωση φώτων τρέιλερ 4 κατευθύνσεων είναι δημοφιλής σε μια ποικιλία τρέιλερ, προσθέτοντας ευέλικτες επιλογές ρυμούλκησης για το όχημά σας. ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ. Χωρίς κόψιμο! Χωρίς μάτισμα! Αυτό το κιτ πλεξούδας καλωδίωσης ρυμουλκούμενου συνδέεται στην υπάρχουσα εργοστασιακή καλωδίωση του οχήματός σας και το εξοπλίζει με μια τυπική, πίσω υποδοχή καλωδίωσης ρυμουλκούμενου 4 ακίδων για σύνδεση και ρυμούλκηση τρέιλερ.
Brand CURT
Brand ‎CURT
Customer Reviews 4.7 4.7 out of 5 stars 1,008 ratings 4.7 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎55513
Item Weight 0.91 Pounds
Item Weight ‎14.6 ounces
Manufacturer ‎CURT
Manufacturer Part Number ‎55513
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55513
Product Dimensions ‎9 x 4 x 3 inches

3.8

13 Review
5 Star
84
4 Star
10
3 Star
4
2 Star
2
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: MH
Easy install, good value
I’m not a mechanic, and this was still easy to install. Took no more than 30-45 minutes going slowly and methodically. Fits the Toyota Tacoma 2005-2015 perfectly and has worked well for me. Would recommend if you don’t want to splice wires.
Scritto da: Capt Jay
Easy Install
I would go for 5 stars, BUT the double sided patch they provided was all dried out and worthless. Ugh.. I had to jump through hoops to secure the module inside the twilight box.
Scritto da: Mustafa Al azzawi
Quality
It is really easy to install and very good for the value but the quality of the wiring not that good but overall I haven’t had an issue with it works well
Scritto da: Ian from the north
Easy install
Perfect fit 2014 Tacoma. Super easy to install and works great.
Scritto da: Jeffy T
Doesn’t get much easier than this!
Clean off some paint, drive a self tapper in for ground, zip tie the slack, plug and play from there! I HATE cutting factory wiring, this was the answer!
Scritto da: Atmosfera
OEM quality
I loved how easy to install this harness was. It is now installed into a Mexican Toyota Hilux 2017. Every connector fits without a problem. The instructions on how to replace it are great. My recommendation is for you to get a tester to keep in the truck for future usage. It only adds a couple of dollars to the setup. Great product!!
Scritto da: DownTown
Install was a breeze
Watched YouTube video on the install and it was very easy. 20 min and I was done.
Scritto da: Tranche
Perfect!
Installed on a 2014 Tacoma after waiting approx. 1 month for Curt to confirm (in their application chart) that the T-Connector for the 2013 Tacoma also fits the 2014. It does! And the quality of this harness is first rate, including the connectors which appear to be identical to the Toyota OEM. Just a few suggestions to improve the installation experience: First, there's really no need to drill a hole to attach the ring terminal ground. Inside the left tail-light housing, there are 3-4 machine screws (ends) attaching the metal housing to the truck body. You need only use one to attach the ring terminal; I used the upper right with a nut and lock washer I supplied. I tested this ground location with a meter and found that it's solid. No drilling. A second suggestion would be to add wire conduit to all three branches of the T. While not required, I believe this upgrade improves the integrity (and certainly the protection) of the wiring and conforms with the OEM wiring in the vicinity of the T-Connector. If you do install conduit, do this BEFORE you plug in and route your wiring. Much easier this way. You'll need approx. 10 ft. of 3/8" or 1/2" split seam conduit; I used Dorman #86651 @ $6 (approx.). Seal conduit ends with electrical tape. Finally, as this T-Connector supplies a flat-4 connector to the trailer, I suggest that you include the Curt 58001 bracket to attach this connector to your receiver tube. It's inexpensive and fits perfectly. 7/28/14 Edit. While I certainly maintain my 5-star rating of this T-Connector, I've found that, over time (6 mos.), one minor flaw presents. The double-sided adhesive strip that's intended to hold the converter box in place loses its adhesive holding power. No worries; the fix is easy: Just replace with similar sized "industrial strength" Velcro. (I recommend 3M Dual-Lok. Very strong and inexpensive.) Cover the entire back of the box with the Velcro and attach to a (preferably) smooth and clean vertical sheet metal surface. (I had no trouble finding this.) If I were on the Product Development Team at Curt, I'd recommend a redesign of the box to include two (2) mounting ears through which sheet metal screws could be used to attach the box -- again, to a non-structural non-frame vertical surface.
Scritto da: canuk54
Fit perfectly on a 2010 Tacoma
This replaced one installed incorrectly by a nearby Truck and Van shop. It was very easy to install, less than twenty minutes from start to finish and works great. It has been installed for 5 months through rain etc with no issues. The last one was installed with the box below the truck bed, making it open to the elements and it didn't last through a Canadian winter before shorting out the brake lights and causing me to not be able to put my truck into gear. After being towed to a garage and having the cause pinpointed to the incorrectly installed trailer wiring, which was removed, all was good. This unit was recommended to me by the repair garage.
Scritto da: R. B. Clarke
Liike original equipment
Name brand and really good instructions Took about 20 minutes and looks like an OEM product which I think it is Solid construction, and only had to drill one small hole for the ground wire , screw incldued Worked like a charm
Scritto da: Amazon Customer
Works perfect.
Super easy to install. Works perfect for my trailer
Scritto da: Chris B
Easy to install
Easy to install, put on a Tacoma that’s always pulling boats out of the water. Holds up no problem
Scritto da: Jarett Miles
easy to install
Quality product, easy to install.

Σχετικά προϊόντα

hot
Hopkins 47155 4 Wire Flat Adapter
3.7/5

Ft 62.65

Hopkins 47155 4 Wire Flat Adapter
3.7/5

Ft 62.65

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array