Blue Sea Systems 6007200 m-Series Battery Switch Selector, Black Black Selector 4 Pos. Διακόπτης

Name: Blue Sea Systems 6007200 m-Series Battery Switch Selector, Black Black Selector 4 Pos. Διακόπτης
Brand: Blue Sea Systems
SKU: 012303405154
Price: 77.40 HUF
Availability: InStock

Brand:Blue Sea Systems

3.7/5

Ft
77.40

Το Blue Sea Systems Battery Switch m-Series Selector, Μαύρο, αριθμός ανταλλακτικού 6007200, είναι ένας διακόπτης επιλογής 4 θέσεων. Αλλάζει μεμονωμένες συστοιχίες μπαταριών σε όλα τα φορτία ή συνδυάζει συστοιχίες μπαταριών σε όλα τα φορτία. IP66 αδιάβροχο, ISO 8846 και πληροί τις απαιτήσεις ABYC. Με προστασία ανάφλεξης—ασφαλές για εγκατάσταση σε βενζινοκίνητα σκάφη. Ο σχεδιασμός της επαφής Make πριν από το σπάσιμο επιτρέπει την εναλλαγή μεταξύ των συστοιχιών μπαταριών χωρίς διακοπή ρεύματος. Συνεχής Εκτίμηση: 300A, Μέγιστη Τάση: 32V DC. Στιβαρός επανασχεδιασμός που έγινε τον Ιούλιο του 2017..

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 012303405154

Κατηγορίες Αθλητισμός & Υπαίθριες δραστηριότητες, Αθλητισμός & Γυμναστική, Αεροπλοΐα και ιστιοπλοΐα, Βάρκες & Εξοπλισμός, Ηλεκτρικός εξοπλισμός, Διακόπτες μπαταρίας,

Συνεχής Εκτίμηση: 300A, Μέγιστη Τάση: 32V DC. Ο σχεδιασμός της επαφής Make πριν από το σπάσιμο επιτρέπει την εναλλαγή μεταξύ των συστοιχιών μπαταριών χωρίς διακοπή ρεύματος. IP66 αδιάβροχο, ISO 8846 και πληροί τις απαιτήσεις ABYC. Με προστασία ανάφλεξης—ασφαλές για εγκατάσταση σε βενζινοκίνητα σκάφη. Το Blue Sea Systems Battery Switch m-Series Selector, Μαύρο, αριθμός ανταλλακτικού 6007200, είναι ένας διακόπτης επιλογής 4 θέσεων. Αλλάζει μεμονωμένες συστοιχίες μπαταριών σε όλα τα φορτία ή συνδυάζει συστοιχίες μπαταριών σε όλα τα φορτία.

Actuator Type	Rotary
Brand	Blue Sea Systems
Circuit Type	1-way
Contact Type	Normally Closed
Country of Origin	USA
Current Rating	300 Amps
Department	Unisex-adult
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Protection Rating	IP66
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	7 x 4 x 3 inches
Item model number	6007200
Manufacturer	Blue Sea Systems
Material	Plastic
Mounting Type	Panel Mount
Operating Voltage	32 Volts
Product Dimensions	7 x 4 x 3 inches; 11.2 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Van Life Geek

Works perfectly for my application

This seems to be a high quality switch from a trusted brand. I use it to switch between two house batteries in my VW Westfalia Syncro Camper Van, or to combine both if needed. It also allows me to disconnect both batteries when needed, during wiring or electrical maintenance for example. I will say that it would have been nice to have a set of mounting bolts, however since it can be mounted in various configurations, I can see why they didn't include bolts since they'd have to supply several sets for the various mounting options. I mounted mine to a thin piece of wood in one of my cabinets initially with wood screws, but had to purchase some actual nuts/bolts/washers for a secure fit. Turning the knob to the various positions puts some serious torque on the unit, so a secure mounting job is required and the original wood screws in the pictures didn't last long. If you are mounting to a thicker panel, regular screws might work. Of course, you may want to mount it in one of the different configurations. Wiring is straight forward and I trust this will function for a very long time. Both batteries connect to the switch, which in turn powers a Blue Sea Systems ST Blade ATO/ATC Fuse Block, (https://amzn.to/2ZgpiPw - see picture) which in turn powers all the various and numerous 12v accessories in my van. This makes a great match for safely routing 12V throughout the van using two batteries. I'll update this review should the unit fail or give me problems in the future, but for now, I'm super happy. I could have spent a little less on a lesser known brand of switch, as there are many choices on Amazon, but Blue Sea Systems has a great reputation and I felt like it was worth a few extra bucks. I really don't want to burn down my van due to some cheap electrical switch!

Scritto da: Brian R

REALLY ?

No fasteners or screws included. For $40 bucks, really ? Also arrived late, like more and more of my orders.

Scritto da: JT

Nice, well made, smaller size switch

Most of the negative reviews on this switch are based on the older model. It has been redesigned and appears to be very well made and sturdy. Time will tell as I just installed mine and tested it. This is a fairly small switch, which is just what I wanted to mount on my Tracker Boat. We ran down the trolling motor battery several days in a row fighting wind all day. I added a back-up deep cycle battery and can now switch between batteries if we run into that situation again. It does not come with mounting bolts or a mounting template. The template I made didn’t work as well as planned as I had to widen some of the drilled holes. I should have flipped the switch upside down to align & drill the holes instead of relying on the template as they would have been perfect that way. I need to go back and adjust the alignment to center the switch in the mounting hole. Mounting it required four #10 x 2-1/2” (3/16” diameter) stainless steel machine screws and SS lock nuts. For panel mounting a 2-5/16” hole is required. From a design standpoint, I expected the Output (Load) to be the center stud and the battery terminals to be the studs on either side of it like the switch’s positions. It is designed with Battery 1 beneath the 1 position on the switch, battery 2 is under the 1+2 position and the load is under the Battery 2 position (see labeling on attached photos).

Scritto da: Jeff Christensen

Missing attaxhment nuts and bolts!

Missing attachment nuts and bolts!

Scritto da: Jeffrey B

Solid switch, pretty easy to connect

Installed on RV to switch or disconnect batteries. Mounted to back of one battery box with some long screws obtained from hardware store. I had to trim some of the plastic inside switch with wire cutter to allow the ends of the 4 AWG battery cables to fit in there but otherwise worked great. Smaller ends this would not have been issue that may exist with smaller cables.

Scritto da: Jacksback

Perfect replacement

I replaced an older version of this exact battery switch because the old one broke. The old one had a bad design and the all four mounting screw plastic posts broke off. This is a new design that appears much more solid and shouldn’t break.

Scritto da: Blueblur1984

Awesome little swtich...emphasis on little

I used this for the dual battery set up on my truck and have very little to complain about. It's well built and pretty simple. There are three posts on the back: one for battery one, another for battery two and a common post that runs the ignition, accessories, etc. I like this particular one because it easily fit in the dash of my truck, has an off position to kill the engine in an emergency and the 1+2 position allows me to jumpstart myself if necessary. Really I only have 2 complaints: 1. The front slides into a rear cover and the two are held together by four long, narrow bolts and nuts. These aren't included...I had to dig around Home Depot for 40 minutes and overspend on some basic hardware that, in my opinion, should have come with it. You'll want 4 skinny bolts about 2 and 1/4 inch long with matching nuts. If the bolts are too long clearance may be an issue depending on where you are mounting your switch. 2. The post are very close together and there is little clearance between the end of the post and the rear cover. Fortunately you can leave 1-4 of the sides off to accomodate the wiring. I had three 2 gauge wires (one on each post) along with two 10 guage wires (on post 1 and 2 going to my battery isolator) and a 6 gauge wire (on the common post feeding the fuse block) which was a VERY tight fit. Again, this is just because it's a small switch, but beware if anybody is going down that same road.

Scritto da: Dan Durig

Good 2 battery switch

Works great for 1 and 2 battery solutions. I put this in my travel trailer to replace and existing on/off switch. I placed it inside so waterproff was not a facotr to me. It is simple to turn and much more durable than the original batt switch. This was smaller than I expected. I was glad this came with a back where my previous one did not. Well documented and easy to follow instructions to install. Coming with the proper screws would have made it a full 5 stars.

Scritto da: Pascal Coulombe

Excellent

Fonctionne très bien. Excellent pour le bateau.

Scritto da: Kelvin Mah

Good find

I had been using one of their external mount switches but this one fit in my boats dash so the install looks way cleaner, and it is well within my amperage requirement. A little hard to find on the website, but highly recommended. Be careful when you torque the bolts as the frame is a little flimsy and the wiring nuts could be a higher torque value , but it works good

Scritto da: Sun

Bon produit, comme dans l annonce

Bon produit, comme dans l annonce

Scritto da: Amazon Customer

Quick shipping

Perfect