attwood 15700-3 Βάση καθίσματος, Σφιγκτήρας με περιστρεφόμενη βάση, Προσαρμόζεται από 7 ½ ίντσες έως 18 ίντσες, Μαύρη, περιστρεφόμενη βάση καθίσματος με σφιγκτήρα αλουμινίου με επίστρωση πούδρας

Brand:attwood

3.5/5

Ft
107.96

Πληροί τον κωδικό B της ABYC. Για να αποτρέψετε τη χαλάρωση της βάσης του καθίσματος, ακολουθήστε τις οδηγίες και σφίξτε σωστά τα παξιμάδια των φτερών – ιδανικά χρησιμοποιώντας πένσα με μακριά βελόνα. Η ευέλικτη βάση είναι ιδανική για χρήση σε σκάφη Jon. Προσαρμόζεται από 7 ½ ίντσες έως 18 ίντσες. Ανθεκτική κατασκευή από αλουμίνιο με μαύρο φινίρισμα με βαφή πούδρας. Η περιστρεφόμενη βάση καθίσματος δράσης μπορεί να δεχθεί καθίσματα με όλα τα πιο δημοφιλή σχέδια οπών στερέωσης.

Πληροί τον κωδικό B της ABYC. Για να αποτρέψετε τη χαλάρωση της βάσης του καθίσματος, ακολουθήστε τις οδηγίες και σφίξτε σωστά τα παξιμάδια των φτερών – ιδανικά χρησιμοποιώντας πένσα με μακριά βελόνα. Η ευέλικτη βάση είναι ιδανική για χρήση σε σκάφη Jon. Προσαρμόζεται από 7 ½ ίντσες έως 18 ίντσες. Ανθεκτική κατασκευή από αλουμίνιο με μαύρο φινίρισμα με βαφή πούδρας. Η περιστρεφόμενη βάση καθίσματος δράσης μπορεί να δεχθεί καθίσματα με όλα τα πιο δημοφιλή σχέδια οπών στερέωσης.
Batteries required No
Brand attwood
Color black
Customer Reviews 4.5 4.5 out of 5 stars 2,807 ratings 4.5 out of 5 stars
Department unisex-adult
Import Made in the USA or Imported
Included Components End Product & Information
Is Discontinued By Manufacturer No
Item model number 15700-3
Item Weight 3.9 Kilograms
Item Weight 8.58 pounds
Manufacturer Attwood
Material Other
Product Dimensions 15 x 7 x 9.5 inches
Seat Width 18 Inches
Vehicle Service Type Boat

3.5

13 Review
5 Star
68
4 Star
19
3 Star
7
2 Star
2
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Michael Gamache
Works with slight modifications
When I first mounted by seats to my 14 Lund, my wife leaned backwards and tipped over. I couldn’t tighten wing nuts tight enough. My solution was to use 2 safety nuts and use socket wrench to tighten. I had to cut metal rods shorter to use a deep socket. Works perfectly .To remove seat just loosen two nuts with deep socket .
Scritto da: Dan - Maine
Clamps work great
I was going to drill holes in the benches of my boat until I found these, and paired with the seats I bought I can have full 360 degree movement as well! Great item!
Scritto da: Amazon Customer
Good product
Could be a little easier to tighten
Scritto da: Ruben Balensuela
It was perfect just what I needed.
Easy to install, very well made at a good price can't go wrong.
Scritto da: jerry
Very easy
Bracket fit the seat and the jon boat bench. Worked out great.
Scritto da: Bryan Housler
Just when you think it's tight tighten it some more
Works very well in gheenoe withe seats I paired to it only draw backs 1. When you think it's tight enough it isn't tighten it some more 2. Non slip material on the clamping legs would be nice 3. Addition of an extra deep socket or special tool would make the install much easier
Scritto da: Steve
Need better instruction to install seat onto this mount
Took a while to figure out that you need to rotate the mount to put screws in for the seat. That’s the only complaint. Wish that’s included in the instructions.
Scritto da: Bellingham, WA
Sturdy, but ad is misleading as to size
The ad says this will fit a 7 1/2" wide seat, but if you want it to stay on, you'd better have at least an 8 1/2 to 9" wide seat. I'll have to attach a piece of lumber to the bottom of my aluminum 7 1/2" seat to add additional width so this will work. It's not a huge deal, but add $10 (minimum) to the cost and a couple hours time, and now it doesn't feel like such a good purchase. It's not that difficult to use a tape measure.
Scritto da: karlfish
Great solution with some adapting required for my boat
The seat bracket kept sliding off the plastic seat of my 12 foot john boat when I leaned. Then, I bought some hooks from Home Depot and screwed them into the seat bench, and the mount was more solid yet still removable. All in all it worked well with the extra support. I don't think this strategy works particularly well with plastic. It's too slippery.
Scritto da: Lubo K.
Good seat swivel
Very stable and sturdy
Scritto da: Pierre Gagnon
Il est solide
Pour ma chaloupe
Scritto da: Amazon Customer
Saved my A$$
Got one of these (and a budget Wyse seat) to put on my 14' aluminium jon-boat, and man, what a game changer. I wanted a way to mount a seat in my boat without drilling additional holes, so when I saw this I was pumped. Usually after a day fishing out in the boat I'd come back with a sore butt and stiff back from sitting on the metal bench seats, but now at the end of the day I still feel fresh ! It was so great that I picked up a second one (and another Wyse seat) for the front for my fishing buddies ! When I was initially reading the reviews, some people complained about the clamp slipping off, but I never had any issues like that, just gotta do it up super tight. Only thing I would say is I wish they would include some sort of tool to help do up the wingnuts, because once the clamp is mounted you only have about 2"-3" of space to get your hands under to do up the wingnuts. I ended up using a piece of 1" PVC pipe with a notch cut in it to tighten up the wingnuts. Still, great product and glad I bought it !
Scritto da: Nelly H
Worked great in my little aluminum fishing boat
No issues, worked great all day. Major change is comfort from last trip!

Σχετικά προϊόντα

hot
Wise Boat Seat Caddy Gear Holder Green
3.5/5

Ft 51.70

Wise Boat Seat Caddy Gear Holder Green
3.5/5

Ft 51.70

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array