Yost Vises BC-6 Αλυσίδα Πάγκου

Brand:Yost Vises

3.7/5

Ft
246.28

Αυτή η μέγγενη αλυσίδας είναι ιδανική για τα έργα σωλήνων σας είτε κόβετε είτε λυγίζετε σωλήνες. Θα συγκρατήσει τον σωλήνα με ασφάλεια στη θέση του χρησιμοποιώντας έναν μηχανισμό αλυσίδας. Έρχεται με αλυσίδα βαρέως τύπου που προσφέρει στιβαρή αντοχή για εκτεταμένη διάρκεια ζωής και ευκολία μεταφοράς. Η Yost Vises παράγει υψηλής ποιότητας μέγγπες και αξεσουάρ μέγγενης από το 1908. Προμηθεύουμε τα προϊόντα μας τόσο σε μεγάλους διανομείς όσο και σε μεμονωμένους τεχνίτες σε όλο τον κόσμο, από μέγγγες βιομηχανικής ποιότητας, επαγγελματικού τύπου μέγγενες, μέγγγες εργαστηρίου, ελαφριές έως βαριές μέγγενες εργασίας, μέγγενες πολλαπλών λειτουργιών, μέγγενες συγκόλλησης κ.λπ. Τα προϊόντα μας πληρούν ή υπερβαίνουν το βιομηχανικό πρότυπο της ομοσπονδιακής προδιαγραφής GGG-V-410A, παρέχοντας στους καταναλωτές προϊόντα ποιότητας που διαρκούν για χρόνια σε εξαιρετική τιμή.

ΕΓΓΥΗΣΗ: Συνοδεύεται από επιστροφή 90 ημερών. ΠΛΗΡΟΦΟΡΙΕΣ ΑΣΦΑΛΕΙΑΣ: Η κακή χρήση μέγκων μπορεί να προκαλέσει σοβαρό τραυματισμό στα μάτια, στα χέρια και σε άλλα μέρη του σώματος. Οι μέγγενες πρέπει να τοποθετούνται και να χρησιμοποιούνται σωστά. Πριν από τη ρύθμιση και τη χρήση, διαβάστε, κατανοήστε και ακολουθήστε όλες τις οδηγίες που περιγράφονται στο εγχειρίδιο. ΠΟΙΟΤΗΤΑ YOST Vises: Κάθε εργαλείο Yost Vises έχει σχεδιαστεί για να έχει υψηλά πρότυπα ποιότητας, αντοχής και ανθεκτικότητας. Εκτιμούμε την ποιότητα σε σχέση με την ποσότητα και κατασκευάζουμε προϊόντα που είναι ασφαλή και εύκολα στη χρήση. Προσφέρουμε τεχνική υποστήριξη εφ' όρου ζωής για να υποστηρίξουμε την εγγύηση ποιότητας. ΚΑΛΥΤΕΡΗ ΧΡΗΣΗ: Ιδανικό όταν εργάζεστε με μεγαλύτερους σωλήνες και σφίγγετε άλλα πιο ογκώδη υλικά ή αντικείμενα ακανόνιστου σχήματος. ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ: Ελάχ. Χωρητικότητα Σωλήνων 0,25 (0,635 cm), Μέγιστη Χωρητικότητα Σωλήνων 6 (15,24 cm). ΜΕΓΓΑΝΑ ΑΛΥΣΙΔΑΣ: Η μέγγενη αλυσίδας Yost Vises BC-6 Πάγκος 6 ιντσών είναι κατασκευασμένη με σώμα από χυτοσίδηρο βαρέως τύπου και στιβαρή βάση από χυτοσίδηρο που διαθέτει εύχρηστο στήριγμα σωλήνα και λυγισμό. Διαθέτει επίσης αντικαταστάσιμη σιαγόνα και αφαιρούμενες μήτρες κάμψης.
Brand Yost Vises
Color Blue, Black
Item Dimensions LxWxH 11 x 9 x 9 inches
Item model number BC-6
Item Weight 22.1 Pounds
Manufacturer Yost Tools
Material Cast Iron
Product Dimensions 11 x 9 x 9 inches; 22.1 Pounds
Style Modern

3.7

13 Review
5 Star
78
4 Star
13
3 Star
4
2 Star
1
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: pring
Great value
Don't know how I got along with out it. Worth its weight. Bolted it through the 2 holes of the tubing posts. Used a u bolt for the rear. If you have a long enough socket extension you could do a bolt down through the actual square vertical post instead of the u bolt
Scritto da: Amazon Customer
Depends on your needs…..
First, bench is solid and seemed well made. Chain, vise, grips and handle all appeared in good order when received. I had not read comments prior to purchasing. I selected this based on overall review score, and it was the middle of the road in terms of cost. I wanted something that would cover my needs on the smaller diameter piping (1/2” & 3/4”, 1” and 1-1/4”) with the occasional 3” to 4” for fixturing and/or securing of material off a truck hitch. This seems to do fine at 1-1/4”, I did not try 1”. 1/2” after tightening down the vise on A53 Grade A gas piping, there was simply not enough bite in the grip teeth. When using a manual threader the pipe would rotate and essentially cut a groove under the chain. Attempting to tighten further placed a crimp that is visible and able to feel a lip from the inside when the area was cut out. Was impressed with the chain strength but the product is not what was advertised, at least in terms of the compatible size ranges. I am returning and purchased the one I should have initially. If you need something for holding in place and don’t intend to place the torque you’d expect while threading, this is probably a good value. I’d like to give this more than one star but not being able to use on either 1/2” and 3/4” pipe is difficult to go higher.
Scritto da: wesley roberts
Happy customer
All right I'm going to give a good review on this chain vice even though it broke on me two times . I'm a pipe fitter it use this thing every day from 12 inch to 3/4 inch pipe it is only made for 6 inch pipe and smaller .but this is the real world so the first time it broke on me was this chain this is easy to take a part to work on it and get back to work . I love that it only cost me about 100 dollars for this chain vice my old chain vice was 450 dollars . The chain will some time come a part the pins will come out after very heavy use what I did just tack weld them back that will solve this problem forever so as a pipe fitter this is a great product I like the one I got
Scritto da: Don
Just what I needed! Thanks!
Thanks
Scritto da: Roger Rupe
Works as good as ridgid half the price
Good so far
Scritto da: Luke
Missing a major piece
Mine arrived with no teeth on it. Updating review contacted the seller and they sent me the teath for it and years later is still working great
Scritto da: R H
Extremely affordable, well made and sturdy
Great alternative to more expensive chain vises, although made in China. Good quality, sturdy and very heavy duty chain.
Scritto da: Mr. Anonymous
This Yost pipe vise is great. After a little bit of use for cutting ...
This Yost pipe vise is great. After a little bit of use for cutting and threading iron pipe from 1/2" up to 1 1/4" it has performed well. Actually, I don't believe any pipe has slipped in its grip once on me. The price was a little up there, but these aren't really all that common, and it seems to be built quite well. I am happy with the vise and would buy it again.
Scritto da: Reds Heat & Hotwater
Huge vise!!!
Great looking vise, yet it is Huge! The picture does not do this vise justice. Seriously, I want a smaller one. This is just to big. How do I return it
Scritto da: nf
Held rock solid
Worked great. I used it to cut 1/2 inch black pipe with a sawsall. It was as stable as the table.
Scritto da: Alfons Poppe
Solid pipe vise good value for a really well built item
Well built item and holds a 3” shaft very solid while setting bearings on it
Scritto da: Denise
Five Stars
Just got it, haven't used it but it appears to be very well made, quality materials.
Scritto da: Steven Whitfield
Buy it
Works as expected. I threaded 1.25 galvanized steel pipe.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array