0
0

Σύνολο:Ft 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς
LoginRegister
0

Σύνολο:Ft 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς
LoginRegister

Wilton CS5 Cross Slide Drill Press Vise, 5 πλάτος σιαγόνων, μέγιστο άνοιγμα σιαγόνων 5" (11695)

Brand:WILTON TOOLS

3/5

Ft
607.58

Οι μέγγενες πρέσας τρυπανιού με εγκάρσια ολίσθηση της Wilton επιτρέπουν επαναλαμβανόμενα τρυπάνια ή βρύσες σε ένα τεμάχιο εργασίας ολισθαίνοντας σε δύο άξονες. Όλες οι μέγγενες διαθέτουν σιαγόνες σκληρυμένες με αυλακώσεις V για σύσφιξη στρογγυλών αντικειμένων κάθετα και οριζόντια. Υποστηρίζεται από τη ισόβια εγγύηση της Wilton.

Ποσό
Προσθήκη στο καλάθιΑγορασε τωρα

EAN: 0662755100185

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Εργαλεία χειρός, Εργαλεία συγκράτησης, Βύσσοι, Επιτραπέζιες μέγγενες,

Εγγύηση Wilton Tools: Υποστηρίζεται από την κορυφαία στον κλάδο εγγύηση εφ' όρου ζωής της Wilton. Σκληρυμένες σιαγόνες με αυλακώσεις σε σχήμα V: Κρατήστε αντικείμενα με στρογγυλό σχήμα τόσο κάθετα όσο και οριζόντια. Ανθεκτική κατασκευή: Χυτοσίδηρος από λεπτόκοκκο χυτοσίδηρο. Εύκολη τοποθέτηση: Η ανθεκτική βάση διαθέτει πέντε ωτίδες μπουλονιών για τοποθέτηση σε τραπέζι μηχανής. Fine Tuning: Τα κουμπιά από την πλευρά του χυτού καλούν με ακρίβεια σε βήματα των 0,1 mm. Ακριβής τοποθέτηση: Μετακινήστε με ακρίβεια το τεμάχιο εργασίας σας τόσο οριζόντια όσο και κατά μήκος.
Brand WILTON TOOLS
Color Metallic
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 8.5 x 11.5 x 6 inches
Item model number 11695
Item Weight 45 Pounds
Manufacturer WMH Tool Group
Product Dimensions 8.5 x 11.5 x 6 inches; 45 Pounds
Style Round

3

8 Review
5 Star
46
4 Star
20
3 Star
21
2 Star
6
1 Star
7

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Bruce Heman
Unit was difficult to adjust until I cleaned it up and re-lubed
1. The vise was very difficult to adjust so I had to disassemble, clean and re-lube. The vise was wrapped in plastic and somewhat oily, but still bound up until I cleaned it. 2. The bottom worm gear is barely secured within the pilot hole on the opposite side of the adjustment crank. Not a problem yet but I wonder about it. Gear should be about 3/8" longer. 3. Bolt down slots are tightest with 7/16" bolts. Because I want to use T-Bolts to secure it to my drill press table and 7/16" are not available for T-Bolts, I had to use 3/8" T-Bolts which require over tightening to compensate for the sloppiness within the slot. Not sure why a reputable vise maker would slots oversized for 3/8" or undersized for 1/2" market available T-Bolts.
Scritto da: John Jessen
Gets the job done
My favorite part about this vise is being able to make small adjustments quickly while drilling custom parts. I bought this to make multiple consistent cuts and quick change ups on my drill. With a set of good parallels, this gets the jobs done for me with ease.
Scritto da: Amazon Customer
but I cannot recommend it because I think it has a serious design ...
In many ways I found the vise I received to be a reasonabe quality piece of equipment for the price, but I cannot recommend it because I think it has a serious design flaw. As others who have reviewed the vise have noted, mine came with grime in the ways and the slides were not well adjusted. By a combination of partly disassembling it, oiling it generously, operating its slides, and then wiping up the grime, I was able to get it cleaned up. However, the sliding T-handle on the clamp is a poor design because when the top sliding part is moved in the direction away from the T-handle, that handle comes in contact with the body before the top slide is at its limit (this is not clear in the product image which shows the T-handle in the horizontal position--in use the T-handle tends to end up in the vertical position with the handle slid downward). In the process of adjusting the top slide, which was hard to move, I didn't notice that the T-handle was against the body and, when I put a little pressure on the slide handle, the end of the screw with the T-bar snapped off. The Wilton website offers replacement handle assemblies for $39 and I am sure that shipping would be added on to that. It's clear that I won't be buying a replacement part.
Scritto da: ExtremeDuty
Wilton Cross Slide Vise
When I saw the name "WILTON" I associated it with the Wilton Vises of yesteryear, the 1st Class #1 Quality Vise That was built in the U S A. I think Ho Che Min snuck in on the blueprints on this one. It'a a little cheesy on the quality side, but it's better than holding things in your hand while you drill. The base mounting on the vise does NOT match the table on the drill press (poor engineering all drill tables are standard) so I had to fabricate a custom mounting base to mount it to the table, which was in my best interest so you would have enough room to operate the bottom slide crank without hitting your knuckles on the table. It's a long way from the "WILTON" brand quality I used to know.
Scritto da: Ron
1st one was defective the holes for the attachment screws ...
1st one was defective the holes for the attachment screws for the upper feed screw were drilled in the wrong places. Trying to turn screw needed two hands. On the second one the lower feed screw retainer was broke in half so used parts from one to fix the other the upper feed screw is still sticky at one end of travel
Scritto da: Michael C.
no more
ok but more over priced CHINA metal
Scritto da: greg
china made
had to completely disassemble, the metal strips on each side were all rusted. hard to keep adjusted. but for the price, and myself not being a business shop, it will serve its purpose
Scritto da: Cliff Vulgamott
5 jn cross vice
the cross vicf is built very well it cranks oh so easy in all directions I look forward to using it in the future.

Σχετικά προϊόντα

hot
Bessey BV-WV65 Woodworkers Vise, 6, Hammer Tone Grey
3.1/5

Ft 97.77

Bessey BV-WV65 Woodworkers Vise, 6, Hammer Tone Grey
3.1/5

Ft 97.77

hot
Yost Vises Y18SS Vise Screw
3.7/5

Ft 120.20

Yost Vises Y18SS Vise Screw
3.7/5

Ft 120.20

hot
Yost Vises 206 6 Machinist Vise με περιστρεφόμενη βάση 360 μοιρών 6 ίντσες
2.4/5

Ft 1722.96

Yost Vises 206 6 Machinist Vise με περιστρεφόμενη βάση 360 μοιρών 6 ίντσες
2.4/5

Ft 1722.96

hot
Μέγγενη πάγκου IRWIN, γρήγορη ρύθμιση (1959551)
3.2/5

Ft 122.50

Μέγγενη πάγκου IRWIN, γρήγορη ρύθμιση (1959551)
3.2/5

Ft 122.50

hot
Yost Vises 465 Combination Vise
3.8/5

Ft 312.50

Yost Vises 465 Combination Vise
3.8/5

Ft 312.50

hot
Shop Fox D4328 9-ιντσών γρήγορης απελευθέρωσης ξύλινη μέγγενη 9 πλάτος σιαγόνων
3.5/5

Ft 463.25

Shop Fox D4328 9-ιντσών γρήγορης απελευθέρωσης ξύλινη μέγγενη 9 πλάτος σιαγόνων
3.5/5

Ft 463.25

hot
Allpax AX7000 Gasket Cutter M3 Rotary-Style Steel Allen Vise Mounted 16,0 x 10,0 x 4,3
3.3/5

Ft 1558.79

Allpax AX7000 Gasket Cutter M3 Rotary-Style Steel Allen Vise Mounted 16,0 x 10,0 x 4,3
3.3/5

Ft 1558.79

hot
Yost Vises 445 Συνδυαστική μέγγενη
3.8/5

Ft 184.10

Yost Vises 445 Συνδυαστική μέγγενη
3.8/5

Ft 184.10

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array

Σύνολο:Ft 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς

Κατηγορίες

Όλες οι κατηγορίες
Μενού Κατηγορίες Κοντά Καροτσάκι

Menu