Τσοκ πρέσας τρυπανιού WEN DPA131H βαρέως τύπου JT33 χωρίς κλειδί με χωρητικότητα 1/64 έως 1/2 ίντσας

Brand:WEN

3.3/5

Ft
74.45

Θυμάστε όταν είχατε το τέλειο τσακ; Ασφαλίστε τα κομμάτια σας με το τσοκ τρυπανιού WEN 1/2 ιντσών χωρίς κλειδί. Αυτό το αξιόπιστο θερμικά επεξεργασμένο τσοκ τρυπανιού από χάλυβα λειτουργεί με λιγότερο από 0,004 ίντσες διαρροής (0,1 mm) για μέγιστη ακρίβεια διάτρησης. Το κωνικό κληματαριά JT33 ταιριάζει τέλεια σε οποιαδήποτε πρέσα τρυπανιού, τόρνο ή μύλο JT33 και μπορεί να εγκατασταθεί με την απλή βρύση ενός λαστιχένιου σφυριού. Το τσοκ 3 σιαγόνων ανοίγει και κλείνει χωρίς τη χρήση κλειδιών ή εργαλείων. Το τσοκ είναι συμβατό με οποιοδήποτε τρυπάνι διαμέτρου 1/64 έως 1/2 ίντσας. Ο γενικός σχεδιασμός μας ταιριάζει σε μια μεγάλη ποικιλία από πρέσες τρυπανιών, συμπεριλαμβανομένων των μοντέλων πρέσας τρυπανιού WEN 4208, 4210, 4210T και 4212.

Συμβατό με τα μοντέλα WEN 4208, 4210, 4210T και 4212 τρυπάνια. Ο γενικός σχεδιασμός ταιριάζει σε κάθε πρέσα τρυπανιού, φρέζα ή τόρνο CNC με άξονα JT33. Ανοίξτε και κλείστε εύκολα τις τρεις σιαγόνες του τσοκ χωρίς εργαλεία ή κλειδιά. Κρατάει τρυπάνια με διάμετρο από 1/64 έως 1/2 ίντσας. Το θερμικά επεξεργασμένο τσοκ τρυπανιού βαρέως τύπου λειτουργεί με λιγότερο από 0,004 ίντσες διαρροής (0,1 mm).
Batteries Required? ‎No
Brand WEN
Compatible Devices Lathe
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 53 ratings 4.3 out of 5 stars
Included Components Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 1/2-Inch Capacity
Included Components ‎Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 1/2-Inch Capacity
Item model number ‎DPA131H
Item Package Quantity ‎1
Item Weight ‎2.12 pounds
Manufacturer ‎WEN
Material Alloy Steel
Material ‎Alloy Steel
Package Dimensions ‎4.37 x 2.24 x 2.24 inches
Part Number ‎DPA131H
Style ‎Keyless Chuck

3.3

9 Review
5 Star
71
4 Star
10
3 Star
4
2 Star
7
1 Star
8

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Steve
Decent Runout
Measured runout at the Chuck jaw to be.0035. This is very acceptable for the DIY and woodworking hobbyist
Scritto da: mike
Quality Chuck
I like the ease of use and heavy duty quality of this Chuck. Works perfectly on my drill press and makes changing bits a breeze.
Scritto da: Quality Conscious Doug
Extremely unbalanced! It shook my new WEN Drill Press so violently that it was unusable.
I recently bought a new WEN Drill Press, and love it. But, it came with an old fashioned Chuck that requires using a key. So, I bought this WEN chuck and an Arbor to install in place of the one that came with the Drill Press. To my surprise, either this chuck, or the Arbor, or both are extremely unbalanced. Together, they shook my drill press so violently that it was unusable. I should have immediately removed them and returned them. Unfortunately, I wasted weeks trying to communicate with WEN Customer Service and the retailer where I bought the Drill Press. Finally, I decided to remove them and install the original OEM Chuck and Arbor to see if the problem was actually the Drill Press. Well, with the OEM Chuck and Arbor installed, it ran buttery smooth. Perfect! Sadly, by then it was too late to return this Chuck and Arbor to Amazon, so I am out nearly $50. ( It should be noted that WEN does not sell an Arbor that can attach this Chuck to my WEN drill press, so the arbor was another brand. ) I have no way to tell which caused the problem, but my knowledge of engineering and physics suggests that the violent shaking was more likely caused by the chuck.
Scritto da: RDomke
Very good replacement socket.
Addition to my harbor freight drill press, Worth the money. Works Very well. :-)
Scritto da: Wade Pladson
Can’t get it to fit! Am I missing something?
Tried to contact the seller for help, no answer. It’s a Wen product, doesn’t fit my WEN drill press. Or I can’t figure it out. But the lack of d response is what I don’t like here.
Scritto da: Lou Rain
Immediate Shipping
I finally found the right keyless chuck for my Delta bench top drill press, after thinking it was a Jacobs 3. It turns our that no one stated this size around in dimension only the designation which is JT33. Very pleased with the delivery and working of the chuck.
Scritto da: John
Can't believe I didn't get this sooner!
There is nothing to dislike! Fantastic drill chuck. Only a quarter turn and the bit is ready to drill. My only question is why Wen doesn't put this on all of their presses on the assembly line? Absolutely worth the money and I highly recommend getting this chuck!
Scritto da: Kevin Heffernan
Fits my machine.
Love it !
Scritto da: Nick Sevastian
Returned
More than 1.5mm runout. Don't buy.

Σχετικά προϊόντα

hot
CS Unitec
4.1/5

Ft 168.26

CS Unitec
4.1/5

Ft 168.26

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array