Weller WSA350 120v Πάγκος Απορροφητής Καπνού

Brand:Weller

3.6/5

Ft
166.10

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Η τέχνη της χειροκόλλησης υπάρχει εδώ και πολύ, πολύ καιρό, χιλιάδες χρόνια στην πραγματικότητα. Αλλά μόνο μέχρι το 1941 αναπτύχθηκε μια μέθοδος άμεσης θέρμανσης με βάση μετασχηματιστή από έναν ανυπόμονο Αμερικανό επισκευαστή ραδιοφώνου που είχε βαρεθεί να κάθεται περιμένοντας να ζεσταθεί το όπλο συγκόλλησης. Ο Carl E. Weller έπρεπε να περιμένει μέχρι το τέλος του Β 'Παγκοσμίου Πολέμου το 1945 για να ξεκινήσει η Weller Manufacturing Company του. Το 1960, η Weller Manufacturing Co. στις ΗΠΑ κατοχύρωσε με δίπλωμα ευρεσιτεχνίας το συγκολλητικό σίδερο «Magnastat» το οποίο χρησιμοποιούσε ένα μαγνητικό εξάρτημα για τη ρύθμιση της θερμοκρασίας στην άκρη του σιδήρου. Σε μια επέκταση στο εξωτερικό που ξεκίνησε το 1959, το εργοστάσιο Weller GmbH στο Besigheim της Γερμανίας, μαζί με νέα εργοστάσια σε άλλες χώρες, οργανώθηκε για την κατασκευή ελεγχόμενης θερμοκρασίας σίδερων και κολλητήριων για κυρίως βιομηχανικές αγορές σε όλη την Ευρώπη και την Εγγύς Ανατολή. Συμβαδίζοντας με την αυξανόμενη πολυπλοκότητα των αναγκών των πελατών μας, η Weller Germany έγινε ο ηγέτης της αγοράς για την ανάπτυξη και την κατασκευή προϊόντων συγκόλλησης χειρός παγκοσμίως. Τα προϊόντα μας ήταν περήφανα διακοσμημένα με το «Made in Germany», που σημαίνει καινοτομία και αξιοπιστία. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Το Weller WSA350 είναι ένας απορροφητής καπνού από πάνω πάγκο που αφαιρεί τις αναθυμιάσεις ροής από έναν πάγκο εργασίας συγκόλλησης. Ιδανικό για χώρους εργασίας που χρησιμοποιούν πιο ενεργές ροές που χρησιμοποιούνται με συγκόλληση χωρίς μόλυβδο. Οι αναθυμιάσεις απορροφώνται από το αντικαταστάσιμο φίλτρο ενεργού άνθρακα - περιλαμβάνει ένα ανταλλακτικό φίλτρο (WSA350F). Η βάση επιτρέπει στον απορροφητή καπνού να ρυθμίζεται σε διάφορες γωνίες. Ο ανεμιστήρας είναι αθόρυβος και δεν προσθέτει σημαντικό θόρυβο στο χώρο εργασίας. ESD χρηματοκιβώτιο.

Ο ανεμιστήρας είναι αθόρυβος και δεν προσθέτει σημαντικό θόρυβο στο χώρο εργασίας. Περιλαμβάνει ένα ανταλλακτικό φίλτρο (WSA350F), χρηματοκιβώτιο ESD. Οι αναθυμιάσεις απορροφώνται από το αντικαταστάσιμο φίλτρο ενεργού άνθρακα. Αφαιρεί τους καπνούς ροής από τον πάγκο εργασίας συγκόλλησης. Ιδανικό για χώρους εργασίας που χρησιμοποιούν πιο ενεργές ροές.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 149 ratings 4.5 out of 5 stars
Included Components ‎1 Weller Branded Product
Is Discontinued By Manufacturer ‎No
Item model number ‎WSA350
Item Package Quantity ‎1
Item Weight ‎2 pounds
Manufacturer ‎WELLER
Material ‎Plastic
National Stock Number ‎3439-01-574-0013
Part Number ‎WSA350
Power Source ‎Hand Powered
Product Dimensions ‎11.3 x 10.2 x 7.1 inches

3.6

3 Review
5 Star
71
4 Star
20
3 Star
3
2 Star
1
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Brad H
Doesn't seem to have enough suction
I got this to be safe while soldering keyboard kits and it's definitely better than the cheapo one I tried before it, but I have to assume there are better options. It's very big. If you have a small workspace, this might be tricky to work around. It's loud. Not surprising, it's a fan and you need lots of suction to whisk the fumes away so I wasn't surprised by that. For it being so big and loud, it doesn't seem to have a lot of suction if you're not directly against the fan. For instance, I had it tilted down toward the board I was soldering, and if I wasn't 2-3" away from it, the fumes would still come up toward my face. It seems like the front of the fan could be changed to create more of a vacuum where as the wide front it does have doesn't really direct the power of the fan if that makes any sense. I've found that I almost need to have the fan tilted forward and my soldering job be almost underneath it. That makes soldering a bit tough so I have to get a lamp to point under there so I can see. It's not ideal, but it's better than sucking in bad fumes.
Scritto da: Gregory
I'm soldering for a good amount of time and going through quite a bit ...
I do stained glass, and when I'm working on a sizable project, I'm soldering for a good amount of time and going through quite a bit of brushed on flux. My work room is small and has just a small ceiling exhaust fan. I looked at a lot of options and did a lot of online research before buying this. There are a lot of smoke absorbers with the same 5" square filter, and most of them are cheaper than this. My decision came down to a question of air flow. This fan seems to have the highest CFM rating of any that I found. The cheapest competitors are much lower. I wanted to make sure that the fan pulled as much of the smoke as possible away from the work. I'm very happy with the result, as I never see smoke drifting toward me and can't even smell the flux being burned away. The whole device is very solidly built. No cheap parts anywhere that I can see. It should last a long time. There's nothing loose, nothing that looks like it will break or fall apart. Nice construction, and nothing that looks "cheap". Some web sites indicate that this is a "quiet" fan, which I suppose is true compared to a lot of other fans, but in my small space it's very noticeable. When listening to music, I have to turn up the volume a little. The fan doesn't screech or make any noise itself, but there IS a lot of air being moved. The trade off between a little more air noise and a lot less smoke is one I'll take every time. The mounting legs for the unit are small but sturdy, the whole fan is fairly light and easy to move with a convenient handle on the top. Being able to adjust the intake angle is great, and it's very easy with this product. I can get it fairly close to my work at a good angle and that helps keep the smoke down. The whole thing is a little big for my work area, but I can't imagine a smaller device that would do the job, so I think I've got the best possible in this regard until someone changes the laws of physics. You need a high amount of airflow, and a smaller device would have to be very, very noisy. Net result: Outstanding performance for the job, a little louder and bigger than I'd like but probably the best that can be done today. I'm glad I didn't purchase any of the less expensive competitors.
Scritto da: Andrew
Perfect for a hobbyist/occasional soldering!
This is a great little unit for the money! While someone who solders every day/all day (or with lead-free solder, which creates more fumes) will probably want something more powerful/bigger than this, this extractor does a fine job of sucking up flux fumes for hobby use or occasional soldering, which is more my application (I'm a soldering novice who bought it for audio electronics work). I'm not working in the most well ventilated room, and this thing does just fine keeping the air clean. It feels like a good quality, well made unit with a bit of heft to it. It's not terribly loud, but not exactly quiet either. You do need to have it fairly close to what you're soldering for it to suck up all the fumes - it won't work as well from several feet away (it also helps to point the fan inlet directly at what you're working on). So it's fine for things from quick and simple jobs up to component replacement on a smaller to medium sized PCB board. I'd say in the grand scheme of things, it's probably a 4/5 score - but I'm rounding up to 5 due to being a good value for the money IMO. Just be realistic about what a tabletop unit like this can do and you won't be disappointed.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array