Weiler 14066 6 Crimped Wire Cup Brush , .014 Steel Fill, 5/8-11 UNC NUT, Made in the USA 6 Dia .014 Μέγεθος σύρματος x 1-1/4 Μήκος επένδυσης

Brand:Weiler

3.5/5

Ft
104.02

Η βούρτσα Weiler 6 Crimped Wire Cup Brush παρέχει πολύ ευέλικτη δράση βουρτσίσματος και την πιο σταθερή απόδοση για απαιτητικές εφαρμογές καθαρισμού ελαφριάς έως μέτριας χρήσης σε σχετικά επίπεδες επιφάνειες. Παξιμάδι 5/8-11 για χρήση σε ορθογώνιους μύλους. Οι βούρτσες κύπελλων προορίζονται για χρήση σε φορητά ηλεκτρικά εργαλεία για την αντιμετώπιση μεγαλύτερων επιφανειών πιο αποτελεσματικά από μια βούρτσα τροχού. Οι βούρτσες κύπελλων με παξιμάδι με σπείρωμα είναι σχεδιασμένες για ομαλή, αποτελεσματική λειτουργία σε γωνιακούς μύλους για γρήγορη εργασία μεγάλων εργασιών. Οι βούρτσες κυπέλλου που διαθέτουν μόνιμα προσαρτημένο στέλεχος 1/4 είναι πιο κατάλληλες για μικρότερες εργασίες και συνιστώνται για χρήση σε εργαλεία αέρα υψηλής ταχύτητας για την πιο αποτελεσματική δράση βουρτσίσματος και τη μεγαλύτερη διάρκεια ζωής. Οι βούρτσες Cup κατασκευάζονται με ατομική οπή κόμπων και συμπαγή κατασκευή δακτυλίου για υψηλή απόδοση και μεγάλη διάρκεια ζωής. Σχεδιάστηκε και κατασκευάστηκε για να μεγιστοποιήσει την απόδοση και να ελαχιστοποιήσει το λειτουργικό κόστος στις πιο απαιτητικές εφαρμογές κλιματισμού επιφανειών. Η χρήση ανώτερης κατασκευής, τα υλικά υψηλότερης ποιότητας και οι πιο αυστηρές διαδικασίες κατασκευής προσφέρουν το χαμηλότερο κόστος χρήσης και την πιο σταθερή απόδοση σε βαριά περιβάλλοντα παραγωγής. Φτιαγμένο στις ΗΠΑ.

ΧΡΗΣΗ ΣΕ ΟΞΕΙΣ ΓΩΝΙΟΥΣ ΜΛΕΙΣΤΕΣ: Ταιριάζει στους περισσότερους τυπικούς γωνιακούς μύλους με σπείρωμα 5/8-11 UNC. ΙΔΑΝΙΚΟ ΓΙΑ ΕΥΕΛΙΚΤΕΣ ΕΦΑΡΜΟΓΕΣ ΚΑΘΑΡΙΣΜΟΥ ΣΕ ΜΕΓΑΛΕΣ ΕΠΙΦΑΝΕΙΕΣ: Απαιτητικός ελαφρύς έως μέτριος καθαρισμός, συμπεριλαμβανομένης της αφαίρεσης διάβρωσης/οξειδίου, αφαίρεσης σκουριάς/χρώματος, ελαφρού αφαίρεσης γρεζιών. Δεν αφαιρεί το βασικό υλικό. ΓΕΜΙΣΜΑ ΣΥΡΜΑΤΟΣ ΑΤΣΑΛΙΒΟΥ ΒΙΟΜΗΧΑΝΙΚΗΣ ΚΑΤΑΣΚΕΥΗΣ: Διαθέτει θερμικά επεξεργασμένο, υψηλής αντοχής σύρμα από χάλυβα που έχει σχεδιαστεί σύμφωνα με τα πιο απαιτητικά βιομηχανικά πρότυπα για ανώτερη αντοχή στην κόπωση και δράση βουρτσίσματος. ΣΤΕΡΗ ΚΑΤΑΣΚΕΥΗ: Κατασκευασμένο με εσωτερικό δακτύλιο από χάλυβα για να συγκρατεί το υλικό πλήρωσης και να εξασφαλίζει ίσες αποστάσεις γύρω από την περίμετρο για την ελαχιστοποίηση των κραδασμών και την παράταση της διάρκειας ζωής. ΚΑΤΑΣΚΕΥΑΣΜΕΝΟ ΣΤΙΣ ΗΠΑ: Οι θάμνοι Weiler Power Cup κατασκευάζονται περήφανα στις ΗΠΑ στο εργοστάσιό μας στο Cresco, PA.
Brand Weiler
Bristle Type Crimped Wire
Grit Material Steel
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 5 x 5 x 3 inches
Item model number 14066
Manufacturer Weiler Corporation
Material Alloy Steel
Product Dimensions 5 x 5 x 3 inches; 12 Ounces

3.5

8 Review
5 Star
65
4 Star
22
3 Star
5
2 Star
6
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Franky Lynn
Using this wire brush cup on steel will definitely put a shine on it.
I love this wire brush wheel. Strange, I know, but true. I have a 1/4" steel sheet plate that I use as a welding table, and I noticed rust spots starting to form on it. I attached this wire wheel to my big angle grinder, and after sprinkling WD-40 on the steel plate, I was able to remove the rust and put a mirror like finish on it.
Scritto da: TREBOR
I DON'T HAVE ONE!!!
IT WAS JUST WHAT I WANTED! ,WORKS WELL
Scritto da: The Magician
Heavy duty wire cup brush
Looks to be really well made. Very heavy duty. Knocked off one star because nut is somewhat thin and when you screw it onto your grinder, good luck finding a 1 & 1/16 wrench that’s thin enough to fit. Finally just used some big pliers and got it as tight as I could. My old wire cup had the nut on the inside instead of the cup so it was very easy to get a socket on it.
Scritto da: Kindle Customer
Works for Wood too
I used this for a big log railing refinishing project, using a 4 inch angle grinder. I went through 4 different sizes and 3 makes of wire cup brushes. They all did a spectacular job of quickly removing old weathered wood and leaving a good finish in preparation for painting or staining. I tried a 3, 3.5, 4, and 5 inch brushes. The 3 inch proved to be the best for the four-inch angle grinder. The Weiler and the Forney brushes gave good service. The DeWalt brush failed and lost bristles very quickly. Price does matter. If you're thinking of using this tool for this application, be sure to wear long sleeves and a face mask. At the end of the day your clothes will be full of bristles.
Scritto da: ROY M
Durable Long Lasting Quality Product - USA made
I do a lot of paint stripping, mostly wood, some metal, w/ a 4 1/2" angle grinder, and these are the most long lasting wire wheels I have found. service life is 2-3 times longer than others I have tried. Careful some angle grinders use a metric thread, these are 5/8" X 11.
Scritto da: WoodTurner
Wires go through Several Layers of Clothing
The main reason I ordered this brush was being made in the USA which over the past few years has been a requirement whenever I have a choice. I needed this for a project to strip stubborn paint and surface rust on a metal machine stand. Although it did the job I was let down by its quality and question how long it will last. Numerous times I could feel wires piercing through two layers of clothing, a flannel shirt and t-shirt then ending with skin. Looking down at the ground I could see wires everywhere along with being stuck to my clothing. Luckily I always wear eyes and ears along with gloves. I have a few Chinese made cup brushes and those for the most part don't shed, they simply wear down over time as it should be. I also have a brass brush from Weiler that has yet to let me down and what led me back to their brand. I really want to support our own, but not if I'm waisting my money on an inferior product, which I feel this is. I don't want a refund. I only ask that Weiler look into this matter and improve products like this. For now though I'll hesitate on my next brush purchase.
Scritto da: Damnett
Worth the extra money
Very effective. Seems much more efficient than my Forney and Dewalt wheels at removing old oil based paint and rust scale from steel. Wear safety glasses and a dust mask.
Scritto da: Willie
Wear safety glasses!
Good brush but kind of expensive. It seems to be wearing out kind of fast and some wires fly out like spears! I got one stuck in the end of my nose about a half inch deep! Ouch! Wear safety glasses!

Σχετικά προϊόντα

hot

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array