uxcell a16060100ux0466 20 τεμ. Κολλητική αντίστροφη βάση με μόνωση PCB Spacer 12,9 mm Ύψος στήριξης (Συσκευασία 20)

Brand:uxcell

3.5/5

Ft
40.32

Για να στερεώσετε το PCB χωρίς εργαλεία, εύκολο στην εγκατάσταση και ξεφόρτωση αντιδιαβρωτική, καλή μόνωση με μεγάλη διάρκεια ζωής. Ιδανικά κατάλληλοι για εφαρμογές συσκευασίας και στοίβαξης PCB, αυτοί οι νέοι αποστάτες/υποστηρίγματα διατίθενται σε επτά δημοφιλή στυλ. Χρησιμοποιούνται για απαιτήσεις από πλακέτα σε πλακέτα και από σασί σε πλακέτα, διατίθενται και σε εκδόσεις με βάση στήριξης και βίδα. Οι αποστάτες/στήριγμα είναι διαθέσιμα σε ένα ευρύ φάσμα υψών απόστασης και θα καλύψουν σχεδόν κάθε ανάγκη συσκευασίας PCB.

Μέγιστο πάχος PCB: 1,8mm/0,07(H). Ύψος στήριξης: 12,9 mm/0,5 (H); Προσαρμογή διάμετρος οπής PCB: 4 mm/0,15;. Κύριο χρώμα: Λευκό; Συνολικό μέγεθος: 20 x 20 x 23mm/0,78x0,78x0,9(Μ*Π*Υ). Καθαρό Βάρος: 25g; Περιεχόμενο συσκευασίας: 20 τμχ x μονωμένο διαχωριστικό PCB. Χώρα Κατασκευής: ΚΙΝΑ; Υλικό: Πλαστικό.
Country of Origin China
Is Discontinued By Manufacturer No
Item model number a16060100ux0466
Manufacturer uxcell
Product Dimensions 20 x 20 x 22.99 inches; 0.01 Ounces

3.5

13 Review
5 Star
70
4 Star
15
3 Star
10
2 Star
3
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Jared
These things are huge! DON'T BUY FOR ARCADE FIGHTSTICK PCBs!
These things are huge! Don't make the same mistake I did. Don't blame the seller.
Scritto da: p4killer
Pin size a little too big. Adhesive pad also large.
These did not fit any of 6 different pcbs i had all of which were chinease small devices from amazon, relays, power converters etc. After i very slightly drilled the holes out they fit fine. But the standoff that are offset if space matters as these will expand your footprint significantly.
Scritto da: L E R
Most fine.
Seems like it's made okay, but should note that these do NOT work on the Raspberry Pi. They are far too large.
Scritto da: Michael
Great for small circuit board mounting.
Worked well for quick mounting of small circuit boards.
Scritto da: Charles E Snyder II
Good selection for what I needed.
Shipped quickly and product arrived exactly as described. Snap into the boards easily and also release quickly when needed. I will definitely restock with this exact item when the time comes to order more.
Scritto da: Madhoo Patil
Good.
Nice product for work.
Scritto da: bryan lamoreaux
works wonderfully
exactly what i needed. size is a bit too big for a raspberry pi, but nothing a drill cant handle.
Scritto da: justin
Exactly what I was looking for.
Awesome product very sturdy just wish the glue was stronger.
Scritto da: jonny
Does what it says on the tin
The adhesive isn't as good as I thought as it came off quite easily. Overall good value for money.
Scritto da: Kriss
Too big
Way too big in diameter, not remotely close to the common diameter I found on any PCB and used by other spacers. I couldn’t use them in the end, and I really have no idea if I ever will.
Scritto da: Alberto Pavan
standard per cs
facile da montare, componente standard: grazie. Ovviamente dipende dalla dimensione del foro in cui dovete inserirlo: nella scheda dollytek con ta2024 passa solo in 2 fori, che sono della dimensione giusta. In un altro l'ho tagliato.
Scritto da: Massimo
prodotto arrivato semi-schiacciato
prodotto funzionante ma arrivato semi-schiacciato, ma stranamente funzionante. Grande limite non fornire la versione "corta" della staffa per case compatti!
Scritto da: Cosalio
Ottimo
Ottimo

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array