Ullman Devices F-2 Alloy Steel Phillips/Torx Mechanical Screw Starter, Λαβή Αλουμινίου, Μήκος 5-5/8

Brand:Ullman

3.4/5

Ft
38.26

Η Ullman Devices κατασκευάζει μια ποιοτική σειρά Specialty Tools για περισσότερα από 75 χρόνια. Οι σιαγόνες της Ullman που έχουν σχεδιαστεί με ακρίβεια συγκρατούν τη βίδα σταθερά για εκκίνηση χωρίς προβλήματα. Οπότε δεν χρειάζεται πλέον να ασχολείστε με τις δύσκολες βίδες! Αυτός ο βιδωτός εκκινητής απελευθερώνεται και επανέρχεται αυτόματα. Ξεκινά μεγέθη βιδών Phillips No. 4, 5, 6, 8, 10 & 12 και Torx μεγέθη βιδών T10, T15, T20, T25, T27 και T30. Η λεπτή, ανθεκτική λαβή αλουμινίου επιτρέπει την εύκολη πρόσβαση σε στενά στενά σημεία. Εάν πέσει μια βίδα, ροδέλα ή παξιμάδι σε μια δυσπρόσιτη περιοχή, μπορεί εύκολα να ανακτηθεί περιστρέφοντας το εργαλείο και χρησιμοποιώντας τον ισχυρό full 1 μόνιμο μαγνήτη στο αντίθετο άκρο της μίζας με βίδα με λαβή αλουμινίου.

Δεν υπάρχουν διαθέσιμες μονάδες
Λεπτή λαβή αλουμινίου για εύκολη πρόσβαση σε στενά στενά σημεία. Ο μαγνήτης ανασύρει πεσμένα σιδηρούχα μεταλλικά αντικείμενα. Απελευθερώνει και επαναφέρει αυτόματα. Ένα γρήγορο κούμπωμα του κεφαλιού, οι σιαγόνες ανοιχτές και οι βίδες συγκρατούνται σταθερά για εύκολη εκκίνηση. Ξεκινά τις βίδες Phillips και Torx σε δυσπρόσιτες περιοχές.
Brand Ullman
Color Silver, Black
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
Head Style Phillips, Torx
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number F-2
Manufacturer Ullman Devices
Material Alloy Steel
Number of Items 1
Product Dimensions 2.45 x 9.6 x 0.45 inches; 0.01 Ounces

3.4

9 Review
5 Star
66
4 Star
18
3 Star
2
2 Star
8
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Tom S
Great Product!
It seems these tools, should be the ninth wonder of the world. After dropping small screws every time I tried installing them, I decided to buy these screw starters. It will amaze you at just how well they work, and I wished I would have purchased them long before now!
Scritto da: Kenshin
Perfect for small parts
Tool is great for small hard to reach screws where you can’t use magnets like a computer or old electronics. For the $11 even if you only need to use it once your pretty much get your moneys worth. Only issue is you can accidentally slide the cooler all the way down and it could get stuck.
Scritto da: Michael Green
Holds virtually any screw for starting
I have been searching for a screw starter like this for years. I already have a starter for blade screws. But I needed a starter for phillips, torx, square head, and star head. There are a few starters available for phillips but this starter does a better job on Phillips and holds all the rest as well. I rarely use blade screws anymore and I am tired of stripping Phillips and having to drill them out. Torx and square head are a little better but star head is the best. I highly recommend the Spax Star Head, e.g. the 4191020400406 which is a "Wood to Wood and Wood to Masonry" #8x 1-1/2" Star head. I bought a 1 lb box at Home Depot. Spax is a German Company and "No Pre-drilling" is required. So far, Amazon only carries Spax in the Phillips head which I use for small sizes unavailable in the star head. I bought the Spax Screws in individual boxes at Home Depot in all the available lengths and only use Phillips for screws less than 1-1/4" long. Don't bother buying the sets of different sizes. I recommending buying individual boxes of one size. For specialty applications, you can buy single large Spax star screws. GRK Fasterners also makes an excellent Star Head. I buy the finishing screws with a trim head. They are larger than finishing nails but unlike nails they are easy to remove. Buy them from Home Depot orGRK 772691177247 8 by 1-Inch 1/2 Containing Equal to 100 Screws Trim Handy FIN, 1-Pack The quality of the above screws are so good, that they can be removed and reused. All of the other screws should be discarded after they are removed because the head is damaged which makes removal a second time very difficult. These screws are also significantly stronger than cheaper screws. So you must judge, what is more important: your time or a few cents more for a quality screw. And this screw holder works well will virtually all of these screws.
Scritto da: Ralph Cates
Quality.
Great for helping start a screw in the smallest of spots.
Scritto da: Mike J
Wish I had it years ago
Wow, the headaches this could have prevented. I can't even understand those that say it doesn't work. It has helped me several times get into those awkward spots. No issue with phillips in real-world use, but I've also tried it in nuts just experimenting, and seems to hold them well also. Not good for tiny items, use a "Universal Mini Nut Starter" for those.
Scritto da: gabor s korthy
High quality made in USA
In this age of so many manufactured items made poorly over seas (you know where !) it is an absolute joy to see an item of this quality. Made in USA . High quality, well made and it works ! I bought another one to give my son after I saw how great this screw starter was. No regrets buying this item. People have forgotten what using a quality tool like this is like.
Scritto da: Mike Calimari
Dead ringer.
This screw starter is identical to a Craftsman branded screw starter that came in a small tool pack I bought from Sears years ago for carburetor and ignition work. I got this one so I don't have to raid my tool box to service computers. I'm planning on ordering the slotted screw starter in the future for servicing brass scale model railroad locomotives.
Scritto da: David Mayer
Not what I expected
Not the size I expected but works ok on some #2 Philips screws
Scritto da: steve skanzou
excellent
great thanks

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array