Τσοκ τρυπανιού uxcell, 3/8-24UNF με σπείρωμα χωρητικότητας 1,5-10 mm με κλειδί τσοκ για ηλεκτρικό κρουστικό καλώδιο μπαταρίας

Name: Τσοκ τρυπανιού uxcell, 3/8-24UNF με σπείρωμα χωρητικότητας 1,5-10 mm με κλειδί τσοκ για ηλεκτρικό κρουστικό καλώδιο μπαταρίας
Brand: uxcell
SKU: 0700955448352
Price: 38.67 HUF
Availability: InStock

Brand:uxcell

3.4/5

Ft
38.67

[ΣΥΝΤΗΡΗΣΗ] - Καθαρίστε τα μηχανικά απόβλητα και τις ξένες ύλες που έχουν μείνει στο τσοκ τρυπανιού εγκαίρως μετά τη χρήση του. Χρησιμοποιήστε το κατάλληλο κλειδί τσοκ για αποσυναρμολόγηση. Η ακατάλληλη εγκατάσταση ή αποσυναρμολόγηση του τσοκ θα αυξήσει την ακρίβεια και την τιμή εξάντλησης. [ΕΦΑΡΜΟΓΕΣ] - Κατάλληλο για εξοπλισμό γεώτρησης όπως φορητή μηχανή γεώτρησης, μηχανές διάτρησης πάγκου, φρέζες, τόρνους κ.λπ. Είναι για πολλούς διαφορετικούς τύπους μηχανών διάτρησης. [3-JAW] - Κλασικό τσοκ τρυπανιού σχεδίασης 3 σιαγόνων με εξαιρετική ικανότητα σύσφιξης. Σκλήρυνση απόσβεσης και λείανση ακριβείας για εξασφάλιση καλής αντοχής στη φθορά. [ΤΥΠΟΣ ΤΣΙΚ] - Τσοκ τρυπανιού με κλειδί, μπορεί να αντικατασταθεί γρήγορα και εύκολα με κλειδί τσοκ (το κλειδί τσοκ περιλαμβάνεται στη συσκευασία). [ΜΕΓΕΘΟΣ] - Εύρος σύσφιξης: 1/16-3/8 (1,5-10 χιλιοστά), Σπειρώματα τοποθέτησης: 3/8-24UNF.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0700955448352

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Βιομηχανικά & Επιστημονικά, Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Ανταλλακτικά και αξεσουάρ τρυπανιών ισχύος, Τσοκ για τρυπάνια,

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	a13042000ux0109
Manufacturer	uxcell
Product Dimensions	1 x 1 x 1 inches; 6.42 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Rich

Fix your drill don't replace it

I always had keyed chucks on drills. The keyless ones ALWAYS loosen while using or get stuck on the new drills. This is a GREAT fix for a drill you like but the keyless chuck is driving you nuts. Don't keep cussing or throw the drill out. Fix it. It'll save you some money and you'll actually like using the drill instead of swearing at it.

Scritto da: TFA

Perfect fit

I needed a new drill chuck and purchased this one. Simple replacement for my old one. Good quality made.

Scritto da: DWG

Making an old Craftsman new

My Craftsman drill, which is over 40-years old, needed a new chuck. This more than fit the bill and was very easy to install thanks to a YouTube video.

Scritto da: T Markworth

Great deal

Like the other reviewer, I used this for a hand drill. Unfortunately, my hand drill turned out to be 7/16-24. One inverted flange adapter later, no problem. Back to the chuck. It tightens very well, seems very well machined, and turns true. I can't think of any reason I should complain. I guess it isn't a 1/2" chuck, but you know what? It costs less than half what a 1/2" chuck costs and would be useless for the application of a hand drill. I'll save that kinda work for my bit brace. I suppose if you like tool-less chucks, then you won't like this so much. The jaws have great grip and there's no appreciable texturing. When you tighten down a bit, it isn't going anywhere. This being a threaded chuck, if you try to use it as a tool-less chuck, you'll just wind up loosening it or something.

Scritto da: B. Jansen

You get what you pay for

Although I took a chance on this, I'm regretting it. Yes, easy to install (it threads on), but does NOT track true. It has a .012 out of round, so impossible to use in my drill press or my micro mill. Would not recommend.

Scritto da: Science Tech

Solid, Affordable, Effective

I finally got rid of the aggravating speed chuck on my electric drill and replaced it with one of these. Woo-hoo, bits don't come loose and fall out anymore! It's as-advertised and correctly marked, solid and precise, and comes with the key. What's not to like?

Scritto da: Barry L. Kin

just what is needed

I had a hard time to change the bits and drills on my battery operated driver, this is just what we needed. works great

Scritto da: Gambris

I like the style of key they used

Works perfectly and you can't beat the price. I like the style of key they used, it makes tightening/loosening it easy without having to use weird hand placement and seems pretty sturdy. Seems like a well made, sturdy product to me but I guess it depends on what you plan to use it for. I had no problem using it to drill through thick bolts at any speed and it securely holds all of my bits, even odd shaped ones, while still keeping them perfectly straight throughout the process.