The Hillman GroupThe Hillman Group 35242 Τετραγωνική κεφαλή δίσκου λαμαρίνας μεταλλικής βίδας 10 x 3/4 60-συσκευασία, Λευκή

Brand:‎The Hillman Group

3.1/5

Ft
27.77

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Αυτές οι βίδες από λαμαρίνα, ή οι βίδες στερέωσης, είναι εξαιρετικά ευέλικτες και χρησιμοποιούνται για την προσάρτηση μετάλλου, ξύλου, υαλοβάμβακα και πλαστικού. Οι αιχμηρές κλωστές ενώνουν το υλικό και εξασφαλίζουν ασφαλές κράτημα. Οι βίδες από λαμαρίνα είναι πλήρως σπειρωμένες με μια αιχμηρή αιχμή. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Αυτές οι βίδες από λαμαρίνα, ή οι βίδες στερέωσης, είναι εξαιρετικά ευέλικτες και χρησιμοποιούνται για την προσάρτηση μετάλλου, ξύλου, υαλοβάμβακα και πλαστικού. Οι αιχμηρές κλωστές ενώνουν το υλικό και εξασφαλίζουν ασφαλές κράτημα. Οι βίδες από λαμαρίνα είναι πλήρως σπειρωμένες με μια αιχμηρή αιχμή.

Το λευκό βαμμένο φινίρισμα συνδυάζεται με το περιβάλλον υλικό. Η κατασκευή από αλουμίνιο προσφέρει μέτρια αντιδιαβρωτική προστασία. Τα εξαρτήματα διαθέτουν τετράγωνη κίνηση για την εξάλειψη της ολίσθησης και της κάλυψης. Τα μέρη διαθέτουν κεφαλή σε στυλ τηγανιού. Για χρήση με τέντες, περιβλήματα βεράντας και παράθυρα καταιγίδας.
Assembled Diameter ‎#10 Millimeters
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎The Hillman Group
Color ‎White
Country of Origin ‎USA
Customer Reviews 4.0 4.0 out of 5 stars 232 ratings 4.0 out of 5 stars
Cutting Diameter ‎#10 Millimeters
Drive System External Square
Drive System ‎External Square
Exterior Finish Painted
Exterior Finish ‎Painted
Fastener Size ‎#10 x
Fastener Type ‎Sheet Metal Screws
Head Style Pan
Head Style ‎Pan
Head Type ‎Pan
Item Dimensions LxWxH 4.38 x 2.69 x 1.25 inches
Item Dimensions LxWxH ‎4.38 x 2.69 x 1.25 inches
Item model number ‎35242
Item Package Quantity ‎1
Item Weight ‎2.08 ounces
Manufacturer ‎The Hillman Group
Material Aluminum
Material ‎Aluminum
Measurement System ‎Imperial
Metal Type ‎Zinc,Plastic
Part Number ‎35242
Product Dimensions ‎4.38 x 2.69 x 1.25 inches
Thread Coverage ‎Fully Threaded
Thread Size ‎#10
Thread Style ‎Right Hand
Usage ‎Sheet Metal

3.1

11 Review
5 Star
61
4 Star
12
3 Star
7
2 Star
6
1 Star
14

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Harlan
Not very strong
Although these are as advertised the one thing is that they break very easily when being screwed into steel and that is with the largest pre-drilled hole possible for the #10 screw
Scritto da: Amazon Customer
Heads break off easy
A little soft as heads broke off
Scritto da: Angela Shoemaker
The heads popped off on a third that I used...
These screws look good and are inexpensive for the quantity. I was putting up some door weather strip. The manufacturer of the weather strip failed to include the screws so I bought these. I predrilled and put these in by hand. The heads, 1/3 of them popped off while snugging them up. Now I have to spend a bunch of time drilling the broken screws out. I've been a carpenter for 20+, so Im aware of the proper way to do things. These are just very low quality in that way. Your best bet is to pass on these and by something of a higher quality.
Scritto da: Thomas Navratil
Good
Good hardware.
Scritto da: Randall
OK replacement
Not bad, but you have to be aware of how much torque is applied when installing, they break easy and the heads strip very easy. Definitely lite duty.
Scritto da: pink
good screw for vinyl lattice
I like the square head drive. Because it's aluminum the magnetic bit holder goes out of play. So if you have a square head with the Correct size bit they stay on the bit nicely.
Scritto da: Edward
Cheaply made very deceiving
Be careful where you use them they are only aluminum and they have aluminum and the head snaps off or or the square drive head rounds out
Scritto da: Eva Marquez
Buyer beware
We purchased this item and when we were ready to use, the head of the screw would brake off. I was in the process of returning the item, but got sick and didn’t realize that the return deadline of March 2nd had passed. Buyer beware, this item is of very cheap quality. Extremely dissatisfied.
Scritto da: Oleg S.
Screw that screws but not too hard.
Fit and finish is good for visual appearance and looks like will not rust around the head. Material is very ligjt and weak alloy, so the heads will come off with just light pressure. On the bright side, weak alloy makes it easy to drill out. Personally I'd looks for something a little stronger unless used in a very light screw in force, don't use impact.
Scritto da: HP
Very weak screws
These screws are not self tapping. They are very soft and I had several screws that just snapped off at the head or bent. would not recommend unless using predrilled holes. Only use for soft materials, wood studs were too tuff for these screws. Reduced to one star...varying uses yield the same results..head breaks off. Do not buy these for any purpose, they will just make your day miserable. Why are they not made of steel or hard aluminum?
Scritto da: Deb
Great
Aluminum trim

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array