The Hillman Group 3347 7/16-14 Top Lock Nut Επιψευδαργυρωμένο, 10 Συσκευασία

Brand:The Hillman Group

3.9/5

Ft
31.05

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Τα παξιμάδια κορυφής κλειδαριάς ή Stover είναι παξιμάδια με στεφάνη που είναι τσακισμένη για να δημιουργήσει τη δυνατότητα ασφάλισης. Αυτά τα παξιμάδια έχουν σκληρυνθεί σε επίπεδο αντοχής βαθμού C, που ισοδυναμεί με 150.000 psi/min Αντοχή απόδειξης φορτίου. Τα παξιμάδια βαθμού C συνιστώνται επίσης για χρήση με δομικούς κοχλίες A-325. Τα παξιμάδια κλειδώματος παρέχουν εξαιρετική αντοχή στη χαλάρωση σε εφαρμογές υψηλών κραδασμών. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Τα παξιμάδια για το επάνω κλείδωμα ή το καπάκι είναι παξιμάδια με στεφάνη που είναι πτυχωμένη για να δημιουργήσει το χαρακτηριστικό ασφάλισης. Αυτά τα παξιμάδια έχουν σκληρυνθεί σε επίπεδο αντοχής βαθμού C, που ισοδυναμεί με 150.000 psi/min Αντοχή απόδειξης φορτίου. Τα παξιμάδια βαθμού C συνιστώνται επίσης για χρήση με δομικούς κοχλίες A-325. Τα παξιμάδια κλειδώματος παρέχουν εξαιρετική αντοχή στη χαλάρωση σε εφαρμογές υψηλών κραδασμών.

Ποσότητα ανά συσκευασία: 10. Ψευδάργυρος για μέτρια αντοχή στη διάβρωση. Τα παξιμάδια Stover είναι ικανά να αντέχουν σοβαρούς κραδασμούς και κραδασμούς. Τα παξιμάδια ασφάλισης στοπ είναι μονοκόμματα, εξάγωνα παξιμάδια ροπής εξ ολοκλήρου με επικρατούσα ροπή με κωνική κορυφή και επίπεδη επιφάνεια έδρασης κάτω με λοξότμητες γωνίες.
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎The Hillman Group
Country of Origin ‎Taiwan
Customer Reviews 4.9 4.9 out of 5 stars 6 ratings 4.9 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Drive System External Hex
Drive System ‎External Hex
Exterior Finish Zinc
Exterior Finish ‎Zinc
Fastener Type Lock
Fastener Type ‎Lock
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎1.4 x 1.3 x 2.5 inches
Item model number ‎3347
Item Package Quantity ‎1
Item Weight ‎4.4 ounces
Manufacturer ‎The Hillman Group
Material Steel
Material ‎Steel
Measurement System ‎Inch
Part Number ‎3347
Product Dimensions ‎1.4 x 1.3 x 2.5 inches
Thread Size 7/16"-14
Thread Size ‎7/16"-14
Thread Type ‎Un

3.9

3 Review
5 Star
88
4 Star
12
3 Star
0
2 Star
0
1 Star
0

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: John
Exactly what I needed
There isn't a lot to say about the product. It's exactly as I needed, a locking nut that doesn't use nylon. If this is something that you need, get it.
Scritto da: K. Marsh
Replacement for MTD 712-3050 lug nuts
OK so it's hard to get excited by a nut. In my case the emotion was relief, relief from the question, why do I have to pay so much to put a new 712-3050 lug nut on my MTD-made Cub Cadet mower? Even if I found a good price, shipping killed the good deal. So here, for the same money as 1 MTD lug nut delivered by slow boat, you get 10 nuts via Prime 2-day. Now I have spares. There is one difference between this and the MTD mower lug nuts, this is a lock nut, meaning the threads near the cone end are bent a bit and require more force to seat. Not a big deal, just put it own clean and lightly oiled and it won't be going anywhere. If it bothers you, run a 7/16-14 tap through it. If you're a purist, make it a thread forming tap. Whatever way you do it, it doesn't matter, it will still hold your lawn tractor wheel on.
Scritto da: Honest Abe
Did the Job
Did the job but could have been thicker in cross-section.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array