Στοιχεία σχεδίασης KUHDWR6 εξαρτήματα για νεροχύτη κάτω από την τοποθέτηση

Name: Στοιχεία σχεδίασης KUHDWR6 εξαρτήματα για νεροχύτη κάτω από την τοποθέτηση
Brand: Elements of Design
SKU: 0789474822324
Price: 41.83 HUF
Availability: InStock

Brand:Elements of Design

3.6/5

Ft
41.83

ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Γνωστή για τα όμορφα κατασκευασμένα, ανώτερης μηχανικής και μοντέρνας σχεδίασης του εξοπλισμού μπάνιου και κουζίνας, η Kingston Brass είναι ένα νέο, συναρπαστικό μέλος της κοινότητας των υδραυλικών ειδών. Η Kingston Brass είχε πλέον αναπτυχθεί γρήγορα και έχει αναγνωριστεί ως πάροχος αξίας στην αξία των προϊόντων, στην εξυπηρέτηση πελατών και στην πηγή εξαιρετικής ποιότητας για μπαταρίες σχεδιαστών και vintage αξεσουάρ. Τα προϊόντα Elements of Design προσφέρουν προϊόντα εξαιρετικής ποιότητας σε προσιτές τιμές.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0789474822324

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εξαρτήματα κουζίνας & μπάνιου, Συσκευές κουζίνας, Κουζίνα Αξεσουάρ νεροχυτών, Εγκαταστάσεις νεροχυτών,

Περιλαμβάνει 6 κομμάτια κλιπ ανά συσκευασία. Αυτά τα κλιπ είναι σχεδιασμένα για χρήση για νεροχύτη κάτω από τη βάση. Κλιπ νεροχύτη κάτω από τη βάση.

Batteries Required?	‎No
Color	‎Multicolor
Customer Reviews	4.5 4.5 out of 5 stars 50 ratings 4.5 out of 5 stars
Finish	‎Brushed
Installation Method	‎Undermount
Item model number	‎KUHDWR6
Item Package Quantity	‎1
Item Weight	‎5.8 ounces
Manufacturer	‎Elements of Design
Material	‎Brass
Package Dimensions	‎4.57 x 2.8 x 1.22 inches
Part Number	‎KUHDWR6
Style	‎Vintage

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: JM

Matches Kraus undermount sink hardware

Bought these to augment the brackets that shipped with a Kraus undermount sink installed under hardwood countertop with garbage disposal attached. Worked as expected.

Scritto da: Robert M. Snyder

Matches KRAUS undermount sink hardware exactly

From everything I can tell this hardware is an exact match to what came with my KRAUS undermount metal sink. In trying to install the original hardware some of the white gromets(not sure what the correct term really is) cracked while hammering them in. Not sure exactly why since the hole I drilled for them was as per instructions but apparently it was to tight for the gromets to fit . Anyway these were a exact match to that hardware. They fit into the holes that I had drilled and did not crack(they were hammered in). From what I can tell the rest of the hardware (screws and metal brackets/ are also an exact match. I would not hesitate to use them in the install but I had left over parts from what KRAUS sent with the sink, so I used that instead. I did install this into a wooden / epoxy counter. So I can't speak to using this hardware with a stone/marble type counter. Not sure why some comments are saying these flimsy. The metal brackets can not be bent by hand if that helps give you an idea as to their strength.

Scritto da: Brad

Holds up the sink

They hold up the sink. I think? Yup. Just checked, it's still there! Sweet. 5 stars little fellas

Scritto da: B. Jones

Did the job like they said and I intended.

Needed these to mount a sink under a Granite counter top. Counter had a 3/4" plywood top and wanted to use the plywood to hold the sink in place against the granite. These clips worked just fine. Put 4 on each side. Used bolts through plywood instead of hardware supplied.

Scritto da: The Family

almost useless

the plastic cup receptacle that is supposed to be buried in the epoxy of the marble came out easily even after the epoxy cured - i tried it twice then gave up. in addition the clips are too short to install over the lip of the sink i was installing (a basic Kohler). Useless - i would ask for my money back but i tore up two of the clips.

Scritto da: Holly Finley

Five Stars

Exactly what I wanted and could find at NO hardware store!

Scritto da: Cory J.

Worked great for under mount sick in granite counter top

Just what I needed for my under mount sink bathroom vanity. I glued in place with silicone first then used these for extra bracing.

Scritto da: JB

Five Stars

did the job just fine