Δείκτης ροής πολυστυρενίου SP Bel-Art Roto-Flo για 3/16 έως ¼ ίντσες I.D. Tubing (H19937-0001) Μπλε, 3/16 - 1/4 ID

Name: Δείκτης ροής πολυστυρενίου SP Bel-Art Roto-Flo για 3/16 έως ¼ ίντσες I.D. Tubing (H19937-0001) Μπλε, 3/16 - 1/4 ID
Brand: SP Bel-Art
SKU: 5057205003744
Price: 56.65 HUF
Availability: InStock

Brand:SP Bel-Art

2.8/5

Ft
56.65

Δεν προορίζεται για χρήση με διαβρωτικά χημικά ή υγρά με θερμοκρασία μεγαλύτερη από 64 βαθμούς C (147 βαθμοί F). Η εσωτερική διάμετρος του καναλιού ροής είναι 5 mm, το κέλυφος του τροχού είναι 25 mm, το συνολικό μήκος είναι 51 mm. Χυτό σώμα από διαφανές πολυστυρένιο με λείες ράβδους σύνδεσης για εύκολη τοποθέτηση. Ο τροχός κουπιών πολυπροπυλενίου με έντονα χρώματα περιστρέφεται όταν αέριο ή υγρό ρέει μέσα από ένα σύστημα. Άμεση απεικόνιση της ροής. ίσια άκρα σωλήνα.

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 5057205003744

Κατηγορίες Βιομηχανικά & Επιστημονικά, Test, Measure & Inspect, Όργανα ανάλυσης ουσιών, Flowmeters,

Is Discontinued By Manufacturer	No
Item model number	199370001
Manufacturer	Bel-Art Products
Product Dimensions	2 x 0.2 x 1 inches; 1.1 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Belinda

Well made but not for our purpose which is 6.6 GPM /400 GPH .

But the Wife now has a neat sounding Kazoo to blow into to make cool sounds . No sweat here she likes to annoy me with it ,and I totally have ot coming.

Scritto da: Quincy Acklen

All 3 sizes are only 1/4" of actual flow (read seller's description)

As is clearly stated in the item description - the internal flow channel of all three differently sized items is the same - 5mm. I wanted 1/2" and the only thing that is 1/2 inch is the flange on the 5mm channel. If you're counting on full 1/2" flow, this will reduce the flow! As it turns out it was an acceptable (if undesirable) reduction, so I kept it installed. It does work well. And there was nothing devious about the seller or the description, I just missed and and want to call it out for others. I thought this product was the answer because I just couldn't find reasonably priced flow indicators much above 1/4". I was fooled (again no fault of the seller) so hopefully you won't be.

Scritto da: JonH

Not sensitive for air

Not very sensitive for air flow. I measured 2.5-3 LPM before the indicator will spin. The brochure that is included with the device says a minimum of 2 LPM is required for use with air. They should specify that in the product description. The 0.5 LPM specification is for liquid, most likely water.

Scritto da: Ronald Heidorn

WORKS WELL

OVER PRICED COULD NOT FIND A LESS EXPENSIVE ONE, USED IN A ENEMA HOSE

Scritto da: Stan, Cooking at Home

But the fllow indicator woks fine.

The hose connectors are too small. But the fllow indicator woks fine.

Scritto da: Pries

So simple its GREAT!

Its so simple its fool proof!! I used it on my tap beer co2 line to tell if i had a leak. Simple, well built and is perfect for me!

Scritto da: Fun lover

only works at moderate to high flow rates

if you're using this to indicate flow where there is very little flow, (less than say, 1.5 gallon per hour, as an educated guesstimate) it will not work. the spinner in the middle doesn't spin. a little dissapointed by that.

Scritto da: Bureiku

Cool tool to show flow

Works exactly as advertised. A great little tool to show flow. The package came with a great tip on how to install, which I estimate saved me a hour of frustration.