Sierra International 35-SS650 Marine-Grade από ανοξείδωτο χάλυβα Panther Safe-Skeg για επιλεγμένους κινητήρες Mercury/Mariner, Nissan, Suzuki, Tohatsu, Yamaha, Force και Honda εξωλέμβιων θαλάσσιων μηχανών

Brand:Sierra International

3.8/5

Ft
152.13

Sierra International 35-SS650 Marine-Grade από ανοξείδωτο ατσάλι Panther Safe-Skeg για επιλεγμένους κινητήρες Mercury/Mariner, Nissan, Suzuki, Tohatsu, Yamaha, Force και Honda Εξωτερικών θαλάσσιων μηχανών Είτε θέλετε να προστατέψετε το νέο σας σκάφος, επισκευάστε το κατεστραμμένο σας είτε Θέλω απλώς να προσθέσω λίγη λάμψη, η κατασκευή από ανοξείδωτο χάλυβα 316 Marine-Grade της Sierra's Panther Safe-Skeg είναι άψογα γυαλισμένη και η εγκατάσταση διαρκεί μόνο λίγα λεπτά! Η Sierra προσφέρει μια πλήρη σειρά Ultimate Skeg Protection and Repair. ΠΡΟΣΘΕΤΕΣ ΛΕΠΤΟΜΕΡΕΙΕΣ • Προσφέρει προστασία από ανοξείδωτο χάλυβα 316 Ναυτικής ποιότητας • Εξαιρετικά γυαλισμένο με σχεδίαση χωρίς ραφή • Περιέχει οπή αποστράγγισης για προστασία από τη διάβρωση και το πάγωμα • Η εγκατάσταση διαρκεί μόνο λεπτά • Πάχος υλικού: 1,5 χιλιοστά μεγαλύτερο από το πάχος (50%) • Η πλάκα ολίσθησης δεν είναι απαραίτητη λόγω υπερβολικού πάχους στο υλικό Safe-Skeg • Το κιτ περιλαμβάνει: Safe-Skeg, Mounting Hardware, Instructions, Allen Wrench and Loctite 262 ΠΛΗΡΟΦΟΡΙΕΣ ΕΦΑΡΜΟΓΗΣ •Σχεδιασμένο για να ταιριάζει: Mercury/Mariner-50-4 60 HP, 2-stroke από τα έτη 1986 έως 2002 Nissan εξωλέμβια – 35-40-50 HP, 2-χρονικά από τα έτη 1993 έως το 2010 Suzuki εξωλέμβια – 40-50-60-70 HP, 4-stroke από τα έτη πριν από το 2003 έως το 2003 Εξωλέμβια – 35-40-50 HP, 2-stroke από τα έτη 1993 έως το παρόν Yamaha εξωλέμβια – 40-48 και 50-85 CV, 2-Stroke από τα έτη 1984 έως το 2000 Force Outboard – 70-75 HP, 2-Stroke από χρόνια 1991 έως 1997 Honda Outboard – 35-40-45-50-90 HP, 4-Streke από τα έτη 1991 έως το παρόν ΣΧΕΤΙΚΑ ΜΕ ΤΗ SIERRA Η Sierra είναι αφιερωμένη στην προστασία εσάς και της επένδυσής σας. Για 50 χρόνια η Sierra, ένα από τα πιο αξιόπιστα ονόματα στη ναυτιλιακή βιομηχανία, προσφέρει με υπερηφάνεια ανταλλακτικά κινητήρων και μετάδοσης κίνησης υψηλής ποιότητας. Τα προϊόντα τους ανταποκρίνονται ή υπερβαίνουν το αρχικό εξάρτημα εξοπλισμού που αντικαθιστά και έχουν σχεδιαστεί για να ανταποκρίνονται στις σημερινές απαιτήσεις του κινητήρα υψηλής ιπποδύναμης ενώ αντέχουν στο σκληρό θαλάσσιο περιβάλλον. ΕΓΓΥΗΣΗ ΙΚΑΝΟΠΟΙΗΣΗΣ ΠΕΛΑΤΩΝ ΤΗΣ SIERRA Όλα τα ανταλλακτικά Sierra πληρούν τις προϋποθέσεις για την Εγγύηση ικανοποίησης πελατών της Sierra Κορυφαίας Βιομηχανίας. Η Sierra εγγυάται ότι τα προϊόντα της δεν έχουν ελαττώματα στην κατασκευή και τα υλικά για τη διάρκεια ζωής του προϊόντος. Εάν ένα προϊόν της Sierra δεν συμμορφώνεται με την εγγύηση, η Sierra θα επισκευάσει ή θα αντικαταστήσει το ελαττωματικό προϊόν δωρεάν. Η εγγύηση υπόκειται σε πρόσθετους όρους, προϋποθέσεις και περιορισμούς. Μπορείτε να δείτε την πλήρη εγγύηση της Sierra που βρίσκεται παραπάνω στην ενότητα Τεχνικές Προδιαγραφές.

Όλα τα ανταλλακτικά Sierra πληρούν τις προϋποθέσεις και καλύπτονται από την Εγγύηση ικανοποίησης πελατών της Sierra Κορυφαίας Βιομηχανίας. Πάχος υλικού: 1,5 mm (50% παχύτερο από τον ανταγωνισμό). Για: Επιλέξτε Mercury/Mariner, Nissan, Suzuki, Tohatsu, Yamaha, Force και Honda Outboard Marine Engines. Δείτε την Περιγραφή προϊόντος παρακάτω για πλήρεις πληροφορίες εφαρμογής. Περιέχει οπή αποστράγγισης για προστασία από τη διάβρωση και το πάγωμα. Εξαιρετικά γυαλισμένο με απρόσκοπτη σχεδίαση. Το κιτ περιλαμβάνει: Safe-Skeg, Mounting Hardware, Οδηγίες, κλειδί Allen και Loctite 262.
Brand Sierra International
Brand ‎Sierra International
Country of Origin ‎Taiwan
Customer Reviews 4.7 4.7 out of 5 stars 1,132 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎35-SS650
Item Weight 1 Pounds
Item Weight ‎1 pounds
Manufacturer ‎Panther Marine
Manufacturer Part Number ‎35-SS650
Model ‎35-SS650
Mounting Type Engine
Product Dimensions ‎0.39 x 0.39 x 0.39 inches
Recommended Uses For Product For Inflatable Boats

3.8

13 Review
5 Star
82
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: PPL who love the South West
Awesome for repairing accident damagd!
Last year after a long weekend at the lake in haste to beat a storm. We jumped in the truck after securing my boat. I for got to raise the outboard. I didn't realize it until after 5 miles of driving. The Skeg was destroyer. I found this product t asked me thousands of dollars. In 20 minutes. Follow the instructions step by step to achieve desired results.
Scritto da: Christian
A++++++
A++++++
Scritto da: Brock Eggleston
Saved my lower unit due to cracked skeg
Skeg on Lower unit had cracked due to hitting a rock. Installed this and it not only looks great it works well. Was easy to locate and install onto the lower unit. Stainless steel fasteners look very nice
Scritto da: DRay
Awesome product
I installed it in the beginning of the season with ease. Probably half hour install. Much thicker and heavier than I imagined. It looks fantastic and add lots of character to my boat when on the trailer. It also helps steering as my other skeg broke off from previous owner. No welding was going to be considered for this aluminum area by me so this is really only option. And I’d recommend it for sure
Scritto da: Chuck
Easy to install, quick fix for a broken skeg.
I bought a SeaRay 180 BR with a 3.0 liter Mercruiser last fall from a dealer that had it on consignment. I saw that it had a big chunk broken out of the rear of the skeg so I almost passed on it. The sales guy (a friend of mine) said just install one of these and it will be good as new. It was super easy to install. Just file off any burrs or divots, tap it in place with a rubber hammer and drill the mounting holes. One little trick I have learned over the years is to use a center punch on the aluminum first to center the drill in the holes on the fitting and keep if from "walking". Then start drilling with a smaller drill bit than the final size. Drill about half way through with the small drill then go to the other side and drill the rest of the way through. The first pilot hole you drilled from the first side will help direct the drill back to the center. When you use the recommended drill size to drill the final hole it will hit the other side dead on.
Scritto da: Kindle Customer
looks great
Does exactly what it says
Scritto da: andrey
Easy installation, perfect fit
Easy installation, perfect fit
Scritto da: Kenneth Baca
A must if your operating your boat in low water level.
Easy install a must for boats that operate in shallow water.
Scritto da: Hootie57
Easy to install
Solid piece to help repair my Skeg after we had found some “hard water” during the last trip out. Fitment was a little off but made a few small modifications and seemed to work well. I’ve used a lot of panther products in the past and they’ve never disappointed
Scritto da: Bev
Fit on a Mercury Classic 60
So although not designed for my 87 Mercury Classic 50, (45 hp 2 stroke, 4 cyl 45 hp) I was able to grind my old front edge slightly and get a great fit. Based on my measurements and the manufacturers feedback, this is the one I chose. The 650 did not fit. This did. Great quality and value. Easy to install 30 minutes.
Scritto da: Marc Sarrazin
Super facile à installer
Parfait pour réparer la pièce briser
Scritto da: Edward W de Jong
Easy to install.
Great product.
Scritto da: Amanda
It was great to hide the damage we had done to our skeg.
Easy to install

Σχετικά προϊόντα

hot

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array