SharkBite 3/4 ιντσών Residential Water Hammer Rerestor, Push to Connect Brass Plumbing Accessories, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22632LF 3/4 in. Residential

Name: SharkBite 3/4 ιντσών Residential Water Hammer Rerestor, Push to Connect Brass Plumbing Accessories, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22632LF 3/4 in. Residential
Brand: SharkBite
SKU: 0687752876116
Price: 88.75 HUF
Availability: InStock

Brand:SharkBite

3.5/5

Ft
88.75

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Απλοποιήστε τα έργα υδραυλικών εγκαταστάσεων με τον ορειχάλκινο SharkBite με σφυρηλάτηση νερού push-to-connect. Αποτελούμενο από σφυρήλατο ορείχαλκο DZR, αυτός ο ορειχάλκινος αλεξικέραυνος είναι απαλλαγμένος από διάβρωση και είναι τέλειος για την επίτευξη χωρίς συντήρηση, συνεχή προστασία από το σφυρί νερού γρήγορα και εύκολα. Αυτός ο ορειχάλκινος υδραυλικός απαγωγέας διαθέτει σχέδιο push-to-connect ιδανικό για εργασία σε στενούς χώρους και μπορεί να εγκατασταθεί σε υγρές γραμμές. Αυτοί οι απαγωγείς σφύρας push-to-connect είναι εύκολο να εγκατασταθούν, συμβατοί με PEX, PE-RT, CPVC και εξαρτήματα σωλήνων χαλκού και δεν απαιτούν ειδικά εργαλεία, κόλλα, πτύχωση ή συγκόλληση για την εγκατάσταση. Αυτοί οι ορειχάλκινοι απαγωγείς νερού με σφυρί είναι κατάλληλοι για εμπορικές επισκευές ή έργα οικιακής βελτίωσης. Οι ορειχάλκινοι απαγωγείς SharkBite μπορούν να αντέξουν 200 βαθμούς F και 200 PSI. 25 χρόνια εγγύηση. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Το SharkBite Water Hammer Rerestor παρέχει χωρίς συντήρηση, συνεχή προστασία από το σφυρί νερού. Οι συνδέσεις SharkBite επιτρέπουν την εγκατάσταση του απαγωγέα σε δευτερόλεπτα. Ο απαγωγέας μπορεί να εγκατασταθεί κάθετα ή οριζόντια.

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 0687752876116

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Καθαρά υδραυλικά, Σωλήνες, εξαρτήματα σωλήνων & αξεσουάρ, Συνδετικά σωλήνων,

ΠΡΟΔΙΑΓΡΑΦΕΣ: Κατασκευασμένο από σφυρήλατο ορείχαλκο DZR, αυτός ο ορειχάλκινος υδραυλικός απαγωγέας μπορεί να αντέξει 200 βαθμούς F και 200 PSI. ΠΡΟΤΙΜΕΤΑΙ ΑΠΟ ΤΟ PRO: Τα εργαλεία και τα εξαρτήματα SharkBite πληρούν τα ίδια υψηλά πρότυπα για επαγγελματικές και οικιακές υδραυλικές εφαρμογές, συνδυάζοντας ανθεκτικότητα και ευκολία στη χρήση. κατάλληλο για εφαρμογές πίσω από τον τοίχο χωρίς πάνελ πρόσβασης. ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ: Ο εμπορικός αλεξικέραυνος με σφυρί SharkBite push-to-connect επιτρέπει τη γρήγορη και εύκολη εγκατάσταση, χωρίς εργαλεία, πτύχωση, κόλλα ή συγκόλληση. μπορεί να εγκατασταθεί σε υγρές γραμμές. ΕΥΚΑΙΡΙΑ: Οι απαγωγείς με σφύρα νερού Pushfit λειτουργούν καλά με σωλήνες PEX, CPVC, PE-RT και χαλκού. μπορεί να τοποθετηθεί κάθετα ή οριζόντια. χρησιμοποιήστε απαγωγείς νερού με σφύρα μεγέθους AA για εφαρμογές οικιακών συσκευών. SHARKBITE BRASS PUSH WATER HAMMER ARRESTOR: Αυτό το εξάρτημα push-to-connect σας επιτρέπει να επιτύχετε χωρίς συντήρηση, συνεχή προστασία από το σφυρί νερού. ιδανικό για εργασία σε στενούς χώρους. αφαιρέστε χρησιμοποιώντας ένα κλιπ αποσύνδεσης ή αποσυνδέστε λαβίδες.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Certification	‎CSA B125.3, NSF/ANSI/CAN 61, ASSE 1010, ASSE 1061, NSF/ANSI 372
Color	Copper
Color	‎Copper
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 370 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Brass
Exterior Finish	‎Brass
Finish	‎Copper/Brass
Included Components	‎Water Hammer Arrestor & SharkBite Tee
Installation Method	‎Push-Fit
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	15 x 3.5 x 3 inches
Item Dimensions LxWxH	‎15 x 3.5 x 3 inches
Item model number	‎22632LF
Item Package Quantity	‎1
Item Weight	‎13 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Measurement System	‎Inch
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎22632LF
Product Dimensions	‎15 x 3.5 x 3 inches
Size	3/4 in. Residential
Size	‎3/4 in. Residential
Temperature Range	‎35 - 200 Degrees Fahrenheit
Usage	‎For potable water and hydronic heating applications only.
Warranty Description	‎25 year limited warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Steven S

Solved water hammer on sprinkler system

Just installed a sprinkler system over winter and upon startup, I immediately noticed the water hammer as each zone valve turned on and off. Purchased the Shark Bite arrestor, installed in about 3 minutes. Cycled my sprinkler system and problem solved.

Scritto da: Mark Vierow

Super easy install

Very easy to install and works great!

Scritto da: Robert D. Finson

Worked perfectly for banging sprinkler supply

My 1" sprinkler supply line would bang so hard the entire house could hear it every single time any sprinkler zone turned on. Finally, I got fed up and bought the most expensive plumbing fitting ever. I tried to install and I MESSED UP, NOT THE PART. If your installation is leaking, it will likely be a DRAMATIC LEAK because 1" pipe carries a lot of water. This is entirely avoidable if you just do it right the first time. Luckily, sharkbite allows you to disconnect and reconnect fittings. My first attempt involved trying to install the fitting by cutting out a small section of 1" pipe, this will not work. You must cut a larger section of pipe out and use a 1" slip fit coupling otherwise you will not be able to properly seat both ends of the pipe inside the water hammer arrestor. DO NOT ATTEMPT THIS INSTALL WITHOUT ALSO PURCHASING A 1" SLIP-FIT COUPLING. If your 1" supply is running parallel between two joists (or close to it), you will need to drill a 1 1/4" to 1 1/2" hole in the side of one of your joists so that you can fit the water hammer arrestor. Finally, the good news: This part worked PERFECTLY. I now cannot hear when my sprinkler system turns on a zone unless I am directly underneath the sprinkler supply line. Dramatic improvement, very pleased! Absolutely worth the cost for this water hammer arrestor.

Scritto da: DB22

Fails after a few years

Easy to install, worked great for a few years. This had to arrest the water hammer on my sprinkler once per day for about 5 months a year for a few years before it died.

Scritto da: Matty

Did the trick

Fixed annoying water hammer that resonated through entire house. Install tool less then 1 minute in pex line that has a little slack in it. Even bought used off Amazon, had shape defect in two of the ports not sure from what, still worked, no leaks. Note, I installed with the hammer arrestor IN LINE with the shock wave, not perpendicular. In other words I followed the instructions that came on the small yellow sheet. Worked like a charm.

Scritto da: m

Expensive, but worth it if you don't want to solder. Works perfectly and goes together exactly like they claim.

Expensive, but if you don't know how or don't want to learn how to solder, the SharkBite fitting system is surprisingly good. I had a bad water hammer caused by an outdoor spigot. Water hammers are very hard on pipes and I was a little dubious as to whether this system was going to work in a system that hammers. But I unsoldered the pipe at an existing 90 and cleaned up the ends of the pipe. I slipped the SharkBite fittings on along with the hammer suppressor and it was water tight immediately. I had my wife at the spigot that was causing the hammer and we exercised the fitting and hammer suppressor as hard as we could with no evidence of stress at the device. I also bought the Deburring (https://www.amazon.com/gp/product/B000K6QFSU/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1) tool that is supposed to help you get the pipe set into the SharkBite to the right depth, but honestly, you just slide it all the way in so I don't really know if that tool is necessary and for $10, I don't think it's worth it.. Also, that tool does not appear to be a de-burring tool, just a gauge that gives you a proper depth. I do suggest the disconnect clip though. I test fit the TEE once and without that disconnect clip, it would have been much harder to get it back apart for installation and for $3, it's worth it. https://www.amazon.com/gp/product/B000FPDFBQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Scritto da: Homely_Man

From shaking shed to simple hum

I installed a backup water system in the back yard lifetime shed. I was organizing one day and the whole shack shook. I immediately checked the pump only to find it wasn't on, it was the water hammer effect shaking the whole shed that was built on 60 deck blocks. For reference the shed was 14x8 feet, so the floor is super solid. This little device prevents massive shaking. I first encountered these on a hot water heater, now I know why they are there.

Scritto da: Jesse Sanchez

1/2 PEX line. Water well supplied home

Works as advertised! I installed a sprinkler system this summer. Even though it have an expensive vacuum break / check valve going from the main line to the sprinkler system I had a water hammer. Every time the sprinkler valves would shift from one zone to another I could hear it in my attic hammering. At first I thought I had squirrels or some animals in my attic. Even bought some traps. With the sounds still happening I was in my attic when I heard the water line clearly. Bought This little gem, installed it in less than 2 minutes. Turned the well back on. Fired up the sprinklers while I sat in my attic shuffling threw the zones ( I can control it with my phone). No more hammering. This little thing is great !!! Good buy for anyone with these issues.

Scritto da: Alan Mcilroy

Works well

Easy installation

Scritto da: Amazon Customer

Quality and cost.

quality and reasonable price

Scritto da: Jerry K

Bye bye water hammer

Water comes out smooth and quiet. No leaks. Super easy to install.

Scritto da: Ozzy Ontario

Easy to install!

It is easy to install but in my case did not solve my hammer water problem. You must install it close to the hammer source and this was not my case. It was a tentative but anyway is protecting my pipes.

Scritto da: M14

Just works

It’s working, water hammer gone