SATA 16-Slot Reversible Wrench Racks, SAE και metric, 2-Pack - ST95411

Name: SATA 16-Slot Reversible Wrench Racks, SAE και metric, 2-Pack - ST95411
Brand: SATA
SKU: 7891645134341
Price: 77.48 HUF
Availability: InStock

Brand:SATA

3.5/5

Ft
77.48

Τα κλειδιά SATA διατίθενται σε βασικά τυπικά και μετρικά μεγέθη και διατίθενται σε βολικά σετ. Ιδανικά για την εργαλειοθήκη οποιουδήποτε τεχνικού, ηλεκτρολόγου ή μηχανικού, αυτά τα υψηλής ποιότητας κλειδιά είναι ιδανικά για μηχανικούς ντίζελ, βαρύ εξοπλισμό, γεωργικά μηχανήματα, επισκευές αυτοκινήτων. ή αφαιρώντας τα πολύ σκουριασμένα, κολλημένα παξιμάδια και μπουλόνια. Οι παχιές και λεπτές δοκοί και τα σχέδια πολλαπλών χρήσεων κλειστού βρόχου σάς επιτρέπουν να πιάνετε σταθερά το εργαλείο με ευκολία για να σφίξετε και να χαλαρώσετε τα εξαγωνικά ή τετράγωνα παξιμάδια και μπουλόνια. Επιπλέον, με ένα ελαφρύ μακιγιάζ, δεν χρειάζεται να κάνετε συμβιβασμούς στη δύναμη. Η χαραγμένη με λέιζερ κλίμακα μέτρησης στο εργαλείο σάς βοηθά να προσδιορίσετε γρήγορα το σωστό μέγεθος. Για μεγαλύτερη ευκολία, τα ρολά εργαλείων ή οι διοργανωτές σάς επιτρέπουν να μεταφέρετε τα εργαλεία σας χωρίς ταλαιπωρία όταν βρίσκεστε εν κινήσει. Το πλήρως γυαλισμένο φινίρισμα χρωμίου προσφέρει μια καθαρή, μοντέρνα εμφάνιση. Καλύπτονται από εγγύηση εφ' όρου ζωής, τα κλειδιά SATA σας βοηθούν να ολοκληρώσετε τη δουλειά.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 7891645134341

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Εργαλεία χειρός, Κλειδιά, Κλειδιά συνδυασμού,

[COMPACT DESIGN] Σύστημα εξοικονόμησης χώρου για συμπαγή αποθήκευση σε ρηχά συρτάρια. [ΚΑΤΑΓΡΑΦΗ ΕΥΚΟΛΑ ΕΡΓΑΛΕΙΑ] Η δυνατότητα αυτόματης ευθυγράμμισης , drop-in παρέχει γρήγορη και εύκολη πρόσβαση στα εργαλεία σας. [ΑΝΘΕΚΤΙΚΟ] Η ενισχυμένη σύνθετη κατασκευή προσφέρει μακροχρόνια αντοχή. [30% ΠΕΡΙΣΣΟΤΕΡΟΣ ΑΠΟΘΗΚΕΥΤΙΚΟΣ ΧΩΡΟΣ] Η ρυθμιζόμενη σχεδίαση καταλαμβάνει 30% λιγότερο χώρο, επιτρέποντάς σας να αποθηκεύετε άνετα το ράφι με παρόμοια εργαλεία. [ΕΠΑΓΓΕΛΜΑΤΙΚΗ ΑΠΟΘΗΚΕΥΣΗ] Οι αναστρέψιμες σχάρες κλειδιών SATA με 16 θυρίδες συγκρατούν κλειδιά SAE ή μετρικά κλειδιά μεγεθών έως 1 ίντσας (25 mm).

Batteries Required?	‎No
Brand	SATA
Brand	‎SATA
Color	Assorted
Color	‎Assorted
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 1,001 ratings 4.5 out of 5 stars
Finish	‎Polished
Finish Type	‎Polished
Head Style	‎Open End
Included Components	‎
Item Dimensions LxWxH	14.17 x 7.87 x 3.94 inches
Item Dimensions LxWxH	‎14.17 x 7.87 x 3.94 inches
Item model number	‎ST95411
Item Package Quantity	1
Item Package Quantity	‎1
Item Weight	‎1.68 pounds
Manufacturer	‎Apex Tool Group
Material	Composite
Material	‎Composite
Measurement System	‎Inch, Metric
Number Of Pieces	‎2
Operation Mode	‎Mechanical
Part Number	‎ST95411
Product Dimensions	‎14.17 x 7.87 x 3.94 inches
Size	‎16 slot
Style	‎16-Slot
Usage	‎Professional
Warranty Description	‎Standard Limited Lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: D-ROLLA

Really like these!

Happy with my purchase. Use them at work every day. Perfect value wrench holder rack!

Scritto da: Paul Y. in Texas

Good overall but won't fit thicker wrenches

Good overall, but I have some older Craftsman (made in U.S.) that won't fit above about 5/8" size. The wrenches are slightly too thick to fix. Anything newer should fit just fine.

Scritto da: John

Okay, but wouldn't fit my wrench sets

These are okay and fairly well made, but I had to return them because my wrench sets wouldn't fit in them. A few of them fit okay but the angle of the racks was not right for the set I have. The two largest wrenches were too thick for the slots and the smallest wrenches were shorter than the width of the slot rails. You can flip the direction of the rails but there's no way to adjust the width, side to side. A detailed dimensional drawing or picture with all the different measurements would've been helpful. :-(

Scritto da: Mark Downs

Works like it's suppose too!

I have long wrenches, and have to get artistic with placement. But that's a different problem!

Scritto da: Ciro Crespo

Too wide at the small end

Not enough room at the small end of 8mm wrenches.

Scritto da: Retired LEO

Great for toolbox drawers

I've had a full set of high-end wrenches for decades, but never bought a decent organizer. The wrenches came in a roll-up canvas pouch, and were quickly hung on a peg board. I needed space on the peg board, and this does a great job of keeping them organized and easily identifiable. My only complaint would be that I wish it had a hole to hang the set (either on a wall, or off the side of my rolling work cart so I didn't have to keep rolling to the drawer area). I'd recommend them, but make sure the handles of the wrenches fit the gaps in the slots. I had to drop a few to the lowest slots so they'd stay in place.

Scritto da: Harry

Works well.

Easy to use and keeps my wrenches organized.

Scritto da: King

They’re okay good, not great.

They are okay. I like the harbor freight ones much better. But they get the job done.

Scritto da: The Dude

These may work for you if your wrenches are skinny.

Slots are all the same size, my wrenches are not all the same size. The design is wrong, the rail need smaller to larger slots for the wrenches to fit properly. Two sets of rails would be needed with each rack for this to work which would cost more and make them even more expensive. The traditional non adjustable racks are a better value and you can get them in reverse configuration and they are easy to cut down to the length you want. I tried to modify them to make them work and ended up making them nonreturnable so I purchased different ones. These may work for you if your wrenches are skinny.

Scritto da: Aaron M

Does exactly what it should

Fantastic product for the price. All my wrenches fit nicely and no longer slide around in the drawer each time I open or close them. They were super easy to reverse and seem very durable. Frankly, I would be ok to pay even a bit more for these. Helps keep my tool chest organized.

Scritto da: Greg M

Better than metal holders

The two best things are you get 2 holders for just a bit more money than a single metal unit and that they are set in opposite directions to save space if using in the same drawer. My only complaint is that they were just a little long to sit right down in my drawers but being plastic I was able to cut square the one end an 1é8 of an inch and all fits well.

Scritto da: Craig d

Very handy

An excellent way to organize my wrenches. It says it will take up to a 1" wrench but I was able to put a 1 1/4" wrench no problem at all. It's also very handy that you can reverse the wrenches if space is an issue. Very happy and wouldn't hesitate in recommending.

Scritto da: Cam

Works okay.

Smaller sizes fit loosely. Not great for a service truck or carrying around. Will work fine for a shop or somewhere you don't need to move them.