Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Ρυθμιστής ηλιακού πάνελ με λειτουργία αισθητήρα θερμοκρασίας Κατάλληλο για μπαταρίες λιθίου, σφραγισμένες, τζελ και πλημμυρισμένες μπαταρίες, Wanderer Li 30A 30A PWM Li Charge Controller

Name: Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Ρυθμιστής ηλιακού πάνελ με λειτουργία αισθητήρα θερμοκρασίας Κατάλληλο για μπαταρίες λιθίου, σφραγισμένες, τζελ και πλημμυρισμένες μπαταρίες, Wanderer Li 30A 30A PWM Li Charge Controller
Brand: Renogy
SKU: 0816360027676
Price: 63.12 HUF
Availability: InStock

Brand:Renogy

3.4/5

Ft
63.12

Περιγραφή Το Renogy Wanderer-Li είναι ένας ηλιακός ελεγκτής φόρτισης 30A PWM που ενσωματώνει αποτελεσματική φόρτιση PWM για να αυξήσει τη διάρκεια ζωής της μπαταρίας και να βελτιώσει την απόδοση του συστήματος. Σχεδιασμένο με απλή διεπαφή για ευκολία στη χρήση, το χειριστήριο χρησιμοποιεί πολλαπλές ενδείξεις LED για να ειδοποιεί τους χρήστες για την κατάσταση φόρτισης και τις πληροφορίες της μπαταρίας. Αυτό το πρόσφατα βελτιωμένο μοντέλο διαθέτει δύο προηγμένα χαρακτηριστικά: θύρα RS232 και φόρτιση μπαταρίας λιθίου. Με την προσθήκη της θύρας RS232, οι χρήστες μπορούν πλέον να συνδέονται και να επικοινωνούν με τη μονάδα Bluetooth Renogy BT-1 . Προσθέτοντας το BT-1 στο Wanderer-Li, μπορείτε πλέον να χρησιμοποιήσετε την εφαρμογή smartphone, DC Home, για να παρακολουθείτε και να προσαρμόζετε το ηλιακό σας σύστημα από απόσταση. Με τη συμπερίληψη της λειτουργίας μπαταρίας λιθίου, ο ελεγκτής αρνητικής γείωσης 30Α είναι πλέον σε θέση να φορτίζει διάφορους τύπους και συστοιχίες μπαταριών 12V, συμπεριλαμβανομένων των περισσότερων μοντέλων λιθίου 12V που διατίθενται στην αγορά. Σημειώσεις εγκατάστασης: Η προεπιλεγμένη θέση εκκίνησης των καταπακτών ακροδεκτών του ελεγκτή Wanderer είναι κλειστή (στη θέση UP) που κατά λάθος μπορεί να μοιάζει με ανοιχτή συρμάτινη καταπακτή. Βεβαιωθείτε ότι έχετε κατεβάσει ΠΡΩΤΑ κάθε καταπακτή ακροδεκτών βιδώνοντας τους ακροδέκτες αριστερόστροφα για να εκτεθεί η συρμάτινη καταπακτή ακροδεκτών στην ανοιχτή θέση. ΜΕΤΑ ασφαλίστε κάθε καλώδιο περιστρέφοντας τις βίδες δεξιόστροφα στην κλειστή θέση. Απλή εγκατάσταση: Ανοίξτε πλήρως την καταπακτή (CCW), τοποθετήστε τα κατάλληλα καλώδια και κλείστε τελείως την καταπακτή (CW). Εάν έχετε οποιεσδήποτε ερωτήσεις σχετικά με αυτό το προϊόν, καλέστε μας στο 1 (909) 287-7111 ή στείλτε μας email στο support@renogy.com . Βασικά χαρακτηριστικά Βελτιστοποιημένο για σύστημα 12V. Έτοιμη η επιλογή μπαταρίας Deep cycle Sealed, Gel, Flooded και Lithium. Η έξυπνη φόρτιση PWM 4 σταδίων (Bulk, Boost, Float και Equalization) και η αντιστάθμιση θερμοκρασίας αυξάνουν τη διάρκεια ζωής της μπαταρίας και βελτιώνουν την απόδοση του συστήματος. Έξυπνη προστασία από αντίστροφη πολικότητα, υπερφόρτιση, βραχυκύκλωμα και αντίστροφο ρεύμα. Πολλαπλές ενδείξεις LED για εύκολη ανάγνωση της κατάστασης φόρτισης και των πληροφοριών της μπαταρίας. Η ενσωματωμένη θύρα RS232 επιτρέπει την επικοινωνία με τη μονάδα Bluetooth BT-1 και τη χρήση της εφαρμογής DC Home για smartphone. Το πακέτο περιλαμβάνει Renogy Wanderer Li 30A PWM Charge Controller 1 x

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0816360027676

Κατηγορίες Πατώριο, Γκαζόν & Κήπος, Γεννήτριες & Φορητή Ηλεκτρική Ενέργεια, Ανανεώσιμες πηγές ενέργειας, Ελεγκτές ενέργειας,

【Απομακρυσμένη παρακολούθηση】 Η θύρα επικοινωνίας RS232 επιτρέπει στον ελεγκτή φόρτισης Renogy Rover να επικοινωνεί με την εφαρμογή DC Home και το Renogy ONE M1 μέσω της μονάδας Bluetooth Renogy BT-1 (συνιστάται ανεπιφύλακτα για πρόσθετο). Αυτό θα σας επιτρέψει να παρακολουθείτε την κατάσταση και την παραγωγικότητα των πάνελ σας εν κινήσει. 【Σημειώσεις εγκατάστασης Wanderer10A

Brand	Renogy
Color	black
Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	Charge Controller
Item Weight	0.3 Pounds
Manufacturer	Renogy
Output Voltage	12 Volts
Product Dimensions	4.31"D x 6.45"W x 1.76"H
Product Dimensions	6.45 x 4.31 x 1.76 inches; 4.8 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: J. Rich

Reliable name, and quick, easy install

I use a Do-It-Yourself small solar system to daily power a freezer in our hot Texas garage. I seemingly runs most of the day in the summer time. I've added a 3rd 100w solar panel and had to upgrade to a 30A solar charge controller to charge my battery string, as a result. I chose Renogy because of the 'reliable' name brand. I have a 1000W Renogy inverter that I have run for over a year with no issues. The install of this new Renogy Wanderer was very straight forward, easy, and quick. My only complaint was 'self-inflicted' :( I'm use to having a digital meter on the front of the controller, telling me the charging current/voltage/watts being used, etc. Being a DIY'er and tinkerer... I enjoy seeing what it's doing! I, for some reason, got involved in the reviews and didn't even notice there wasn't one!! It just has colored LED's to report the systems status. For the normal person that's a non-issue. It's a good unit! :)

Scritto da: Andy

Used for off grid electric fence.

I bought 2 of these for separate livestock fences that I don't have grid power to yet. I have this with a battery, and an electric fence energizer in a waterproof plastic Craftsman toolbox with a rubber gasket seal and drilled my holes in the side of the toolbox and added rubber grommets to run the wires in from the solar panel. They've been working in temps up to 100 F down to about 8 F just fine.

Scritto da: Southern Guy

Solid

Used this for a small solar build for a storage shed and I'm very satisfied with it. It was easy to install and is maintaining the battery very well using 1 100 W solar panel.

Scritto da: Amazon Customer

SIMPLE YET FUNCTIONAL

Excellent device. I cannot overemphasize the need to NEVER connect solar panels only,it WILL damage the device. Learn this: First Step: BATTERY CONNECT Last Step: BATTERY DISCONNECT

Scritto da: Michael L Key

Get the BT module!

without the BT module to adjust voltages, the Lithium setting has too low a voltage for LifePo4 by default, the BT module lets you adjust and save settings

Scritto da: brendon

Have not needed tech support

This thing is pretty amazing. There’s a video review of this item but the user is doing everything wrong and he thinks it’s the devices problem. First off, hold the grey button LONGER than 7seconds to change between battery types, push it quickly to rotate through or cycle the battery options and they are all color coded for ease of locating. The video of the user pushing the grey button for less than 5 seconds is really bad and misleading. He did NOT read the instructions. Hook up t he battery first and hold the grey button for longer than 7 seconds to set battery type. Then connect the solar panels. Know this: the set screws arrive in the clamped shut position and you MUST unscrew them to open the connecting terminals (again the guy with the bad video states the screws are bad) using a small driver designed for smaller screws. Do NOT use a number one screw driver, it’s to big and will cause head stripping. The only draw back is there is no USB connection and that would be nice.

Scritto da: Francisco Escalera

A good quality product.

It is an excellent controller to charge lithium batteries.

Scritto da: D. R. lee

Pay Attention

If your solar project includes cameras or phones avoid this controller. It has the input for the solar panel and the output for the battery charging circuit but strangely a sensor plug and an RS232 plug. What it doesn't have are any USB power outlets. I'm now waiting for a 12vdc to 5.5vdc adapter to finish powering my camera, an extra expense and delay I wouldn't have if I had paid attention.

Scritto da: Dave

Great little unit.

I brought this as an upgrade from one of the unbranded charger controllers to give me some room to upgrade and as with all the other Renogy kit I've installed it hasn't disappointed. Holds a better charge voltage for longer delivering more amps and handles cloudy cover better than the cheap unit. Worth the money if you're not splashing out on an MPPT.

Scritto da: Elephants Never Forget

A teach product from a terrible company

There are barely any LifePo4 charge controllers available on Amazon under $100, so I bought this Renogy one, despite being reluctant to deal with Renogy. I know Renogy has a terrible reputation for customer service, but I hoped this product wouldn't need any. This thing is terrible. When my LifoPo4 battery is fully charged, this charge controller gives it full panel voltage every few minutes. That means it sends over 20v to my battery, causing my inverter to go into over-voltage shutdown every time. I hope my new $1200 LifePo4 battery's BMS was protecting the cells from damage while that was happening. Contacting Renogy for help from Canada is a nightmare experience and I recommend not bothering. If you are patient and lucky enough to even reach a member of staff you'll probably find that they are about as intelligent as Siri and can do nothing other than waste your time and give you stupid answers. It is actually painful to deal with them. I will never buy from Renogy again. Their panels are good enough, but their electronic products are cheaply made, unreliable (even dangerous) and they offer the worst customer support in the solar industry. I will have to find another controller that isn't made by Renogy.

Scritto da: Rob Young

All the information you could ever want just not so easy to change parameters.

New rewiring of solar to my teardrop tongue box was flawless and easy. I added the BT-1 and temp sensor for full information and it's now perfect. The only drawbacks I've noted are the inability to alter control or have a constant reading of the information. Once the signal to my iPad is lost, the information is not recorded. Seems counter intuitive.

Scritto da: Nathan L

Excellent value and quality, great output and convenient size.

No complaints at all so far. Plugged a 160W Kings Folding panel into it, and in late afternoon, Winter sun on the east coast of Australia, angled towards the sun the best I could, I was pulling 7.85A out of this controller which is more than enough to keep my fridge running indefinitely off my lithium battery. Don't let people tell you that an MPPT is superior, because for small panels, there's very little difference in my experience. Excellent controller that I bought as a backup in case my CTEK blows an internal fuse (again) and is totally useless. Build quality is good, hard plastic with an aluminium base plate. The grub screws hold 8AWG cable very well and it won't pull out on their own easily. The LED indicators are very bright and easy to see in sunlight too.

Scritto da: Karl Mueller

Simple to use

I bought this charge controller to replace the very cheap and nasty default controller that came with my solar panels. This one works very well. Simple to use, just has solar in and battery out. No load connections, and for my set-up that is perfect as load is directly off the battery. The controller has start, bulk and float charge modes. There is a maintenance mode but that hasn't been activated yet. I also bought the BT01 adapter so I can use the app to monitor it.