RCBS Berdan Decapping Tool

Brand:‎RCBS

3.3/5

Ft
119.53

Η RCBS ειδικεύεται στην προσφορά μιας ολοκληρωμένης σειράς προμηθειών επαναφόρτωσης για τον οικιακό χειροφορητή. Τα RCBS Reloader Supplies θέτουν τα πρότυπα για εξοπλισμό επαναφόρτωσης υψηλής ποιότητας - όπως ακριβώς κάνουν για περισσότερα από 60 χρόνια. Με έξι δεκαετίες εμπειρίας στο ενεργητικό της, η RCBS γνωρίζει όλες τις λεπτομέρειες του εξοπλισμού που χρησιμοποιεί ο οικιακός επαναφορτωτής πυρομαχικών. Η ορειχάλκινη θήκη είναι το πιο ακριβό μέρος ενός φορτωμένου πυρομαχικού. Η επαναφόρτωση ορείχαλκου (αντικαθιστώντας το αστάρι, τη σκόνη και τη σφαίρα μέσα στο χρησιμοποιημένο ορειχάλκινο περίβλημα) προσφέρει εξοικονόμηση περίπου 60% σε σχέση με τα πυρομαχικά που είναι φορτωμένα στο εργοστάσιο. Οι προμήθειες χειρός φόρτωσης RCBS παρέχουν στους σκοπευτές όλα όσα χρειάζονται για να επαναχρησιμοποιήσουν τις ακριβές ορειχάλκινες φυσίγγιες φορτώνοντάς τις ξανά με νέο αστάρι, σκόνη και σφαίρες.

Δεν υπάρχουν διαθέσιμες μονάδες
Με βάση θήκης και εξάγωνο κλειδί. Θερμικά επεξεργασμένο κράμα χάλυβα κορυφαίας ποιότητας. Για αποτελεσματική αφαίρεση των ασταριών Berdan. Εργαλείο Decapping Berdan. Εργαλείο Decapping Berdan. Εργαλείο Decapping Berdan. Εργαλείο Decapping Berdan. Εργαλείο Decapping Berdan.
Brand Name ‎RCBS
Color ‎Multi
Customer Reviews 4.2 4.2 out of 5 stars 34 ratings 4.2 out of 5 stars
Included Components ‎Berdan Decapping Tool
Item Dimensions LxWxH ‎1 x 1 x 1 inches
Item Package Dimensions L x W x H ‎5.94 x 4.53 x 1.65 inches
Item Weight ‎0.06 Pounds
Manufacturer ‎RCBS
Material ‎Blend
Model Name ‎9525
Model Year ‎2012
Number of Items ‎1
Package Weight ‎0.35 Kilograms
Part Number ‎9525
Size ‎One Size
Sport Type ‎Hunting
Suggested Users ‎Unisex-adult

3.3

8 Review
5 Star
66
4 Star
9
3 Star
14
2 Star
4
1 Star
8

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Nathan tanner
Maybe user error?
Third case I went to de-cap, (ping-fwoosh) the point on the tool doing all the work, sheered and disappeared. Abra ka dabra, gone forever.
Scritto da: Jim Matson
Wish I had purchased berdan deprimer sooner!
I have many berdan primed cases that I reload. I have tried every method any crazy person had invented on the internet to deprime the cases and and all of them failed or had a less then 50% success rate. They either damage the case or make a heck of a mess. I had always seen the less then stellar reviews of this item and just passed it by. Being desperate for a better solution I thought I would give it a shot. WOW is all I can say. The first case I tried out of the box "without adjusting" I messed up the primer anvil. So I actually read the direction and made a few adjustments. As long as the adjustment is correct for the given case size this thing worked great! I even have some 8mm Mauser military crimped cases that I deprimed and had no issue at all. Just go easy and don't force it. When done correctly this primers literally pop right out. The key to the adjustment is to get the metal point into the fire primer pocket in order for the pick to get foot hold. If you have the patience to take your time and set up the primer puller correctly you will find this is really quick and easy and a wonderful 100% success rate solution. I would buy this again. Sorry I waited so long.
Scritto da: dr Bee
Works with skill
Does exactly what its made to do. A crude way of pulling primers but works. Now if I can just buy the berdan primers. Im set up.
Scritto da: Pedley Dan
It really does work!
After reading others' experiences with this tool for the last couple of years, I finally sprung for it. It works! and it works quickly. The key is adjusting the pin to the correct depth. It was not hard to get it adjusted just right. I recommend wearing leather gloves to keep from wearing a hole in your hand from using it. I already used it to decap a few hundred 7.62 x 39 shells. There were only a few that I couldn't get out..... these were military rounds, and they were crimped. The manufacturer says not to use it for military rounds because of the difficulty with the crimping, but it was not that big of a deal. Again, the key is in the initial adjustment for whatever round you are doing. Just a little practice to get it consistent, and you are off!
Scritto da: Amazon Customer
This was given as a gift; however, I ...
This was given as a gift; however, I have one of these as well, and it works exactly as it should. Of course, it must be adjusted for the casing/cartridge/primer diameter one is working with, so there is a bit of trial and error associated with getting it right - but - when it "is" adjusted, it works perfectly. Just be sure that the primer has been "spent" because it will ignite "unspent" primers when it is used.
Scritto da: Amazon Customer
Fine tool if you want to avoid the hidraulic system
Will do the job removing non factory primers. Takes some practice to use. Must be operated carefully or the case holding system might ruin the case. Fine tool if you want to avoid the hidraulic system.
Scritto da: Charles Linden
Good product but expensive and decapping pins not durable.
Fairly easy to use. Takes about 5 minutes of practice and some adjustments but it's good to go. The decapping pins are another story.
Scritto da: Topher
Berdan decapper
This is a decent product but could be re-engineered. Becareful with the tip as they are fragile. It broke after ten primer's. RCBS sent two to replace it no problem. It needs to set just right or you will have problem's.

Σχετικά προϊόντα

hot
hot
Lyman 7631340 Turbo Case Cleaner 16 oz
3.6/5

Ft 55.59

Lyman 7631340 Turbo Case Cleaner 16 oz
3.6/5

Ft 55.59

hot
RCBS Case Lube Pad 1 Pack
3.8/5

Ft 40.95

RCBS Case Lube Pad 1 Pack
3.8/5

Ft 40.95

hot
RCBS 29001 Full Length Die Set
3.7/5

Ft 91.95

RCBS 29001 Full Length Die Set
3.7/5

Ft 91.95

hot
RCBS Shell Holder #20
3.9/5

Ft 30.09

RCBS Shell Holder #20
3.9/5

Ft 30.09

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array