Protoco 1040 Standard 12 τεμαχίων με κλειδί ράφι, οργάνωση εργαλείων για εργαλειοθήκη, καροτσάκι εργαλείων ή επιτοίχιο, πράσινο πράσινο 12 τεμαχίων

Brand:Protoco

3.5/5

Ft
38.89

Ενημερώστε το κιβώτιο εργαλείων ή το καροτσάκι εργαλείων σας και κρατήστε τα εργαλεία σας οργανωμένα με τη βάση κλειδιού της Protoco (The Original!), διαθέσιμη σε 12 ή 15 τεμάχια, στάνταρ ή όπισθεν. Η τοποθέτηση τοίχου είναι επίσης μια επιλογή για να διατηρείτε τα κλειδιά σας τακτοποιημένα. Οι μέρες που αναζητούσατε ένα κλειδί συγκεκριμένου μεγέθους στο κάτω μέρος της εργαλειοθήκης σας ή περνούσατε από συρτάρι μετά από συρτάρι με συσσωρευμένα συντρίμμια έχουν περάσει πολύ. Με το Protoco Wrench Rack, τα εργαλεία σας βρίσκονται πάντα στο οπτικό σας πεδίο, διευκολύνοντας την εύρεση του κατάλληλου κλειδιού για τη δουλειά, ανεξάρτητα από το ποια είναι η εργασία. Διαθέσιμο σε ποικιλία χρωμάτων, η σχάρα κλειδιού μας προσαρμόζεται εύκολα στην ατμόσφαιρα που δημιουργείται στο χώρο εργασίας σας, αποτελώντας άψογα μέρος της.

Δεν υπάρχουν διαθέσιμες μονάδες
Σχετικά με την Protoco: Η Protoco κατασκευάζει προστατευτικά καλύμματα, πλαστικά προϊόντα χύτευσης με έγχυση, προϊόντα με ρευστοποιημένη βαφή πούδρας, επιστρώσεις, προϊόντα θαλάσσης και προσαρμοσμένες συσκευασίες, όλα περήφανα Κατασκευάζονται στις ΗΠΑ από το 1977. Ευέλικτο: Ταιριάζει σε SAE και μετρικά κλειδιά και κρατά κλειδιά από 1 /4 έως 1 και 6 mm έως 24 mm. Ιδανικό για το τρέχον σετ κλειδιών σας αλλά και για τη ρύθμιση ενός νέου! Είναι επίσης σχεδιασμένο για να χωράει όλα τα κλειδιά σας σε ένα συρτάρι ύψους 1" στην εργαλειοθήκη ή στο καλάθι σας. Εξαιρετικά ανθεκτικό: Κατασκευασμένο από πλαστικό υλικό υψηλής πυκνότητας, το οποίο παρέχει ανθεκτικότητα, αντοχή στην κρούση και μακροζωία. Ένας οργανωτής εργαλείων που θα είναι μέρος της εγκατάστασης σας για τα επόμενα χρόνια, με υποστήριξη της ποιότητας Protoco και Made in USA!. Τοποθετείται εύκολα: Αυτή η σχάρα κλειδιού μπορεί επίσης να εγκατασταθεί εύκολα, και αν κρεμάσετε τα εργαλεία σας στον τοίχο, τα κρατά εντός της οπτικής σας επαφής, επιτρέποντάς σας να προσδιορίσετε το σωστό κλειδί για την εργασία με μια ματιά. Εξοικονομήστε χρόνο που θα χάνετε αναζητώντας το σωστό εργαλείο και ολοκληρώστε τα έργα σας πιο γρήγορα!. Ανώτερη οργάνωση: Διατηρήστε την εργαλειοθήκη σας οργανωμένη και σταματήστε να χάνετε χρόνο αναζητώντας το κλειδί που χρειάζεστε. Η θήκη μας για κλειδί 12 ή 15 τεμαχίων τα κρατά όλα οργανωμένα και ευδιάκριτα αντί να επιπλέουν σε ένα συρτάρι, έτοιμα για χρήση όταν τα χρειάζεστε.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Protoco
Brand ‎Protoco
Color Green
Color ‎Green
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 123 ratings 4.6 out of 5 stars
Finish ‎Powder Coated
Finish Type ‎Powder Coated
Head Style ‎Box End
Included Components ‎Wrench Rack
Item Dimensions LxWxH 9 x 6.13 x 1 inches
Item Dimensions LxWxH ‎9 x 6.13 x 1 inches
Item model number ‎1040
Item Package Quantity ‎1
Item Weight 0.02 Pounds
Item Weight ‎0.02 Pounds
Item Weight ‎0.32 ounces
Manufacturer ‎Protoco
Material Plastic
Material ‎Plastic
Operation Mode ‎Mechanical
Part Number ‎1000G
Product Dimensions ‎9 x 6.13 x 1 inches
Size ‎12-Piece
Warranty Description ‎Parts

3.5

13 Review
5 Star
76
4 Star
13
3 Star
2
2 Star
7
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Shopping Guy
Best rack if you don't need to captivate your wrenches to carry them around
This wrench rack is perfect for organizing your tools in your tool box drawer when you don't need to carry all your wrenches around. This rack is the easiest to get wrenches in and out and they sit nicely in the grooves nestled into the two foam strips on the inside of each rail that keeps them in place unless you slam the drawer pretty hard. Compared to the type of rack that captivate the wrenches this also takes up a little less height and area in your drawer. If you want a rack that captivates to tools you can check out a couple of the other reviews I submitted, but for drawer organization and pure good looks - if you typically do your work near your box these are the best.
Scritto da: ED
Good rack, nice quality
These fit my snap-on wrenches well. Sizes 10-24mm. Im not sure how well they would work with the craftsman wrenches that most guys have for home since those are a little bulkier. These hold up well for everyday use in the shop though. I tend to like the gripper style better myself. The wrenches wiggle around in these some. Not a big deal I just like how the gripper style racks hold them tight and allow you to grab the entire rack and carry it around if needed. The quality of these are very good though. And a lot cheaper on amazon than off the matco truck. I give 4.5 stars.
Scritto da: Warren and Christine
Standard
Pretty much the standard in wrench racks. My others I've had for forever now. The foam on this initially had the wrenches sitting high up in the grooves but over time they settle in. I just wish they still had the clip that went over the rack that held them in place in case you needed to take them somewhere. I'm not a fan of the clip in style racks because I don't want to fumble getting a wrench. Time is money and I don't need frustration.
Scritto da: RB211
Perfect For Drawer Use
Perfect if you keep your wrenches in a tool box drawer. The addition of the raised, foam down each side is a nice feature, however I'm sure it will compress over time and not be as effective at keeping each wrench placed.
Scritto da: Wesley Schaefer
Cheap 3d printed
They hold wrenches. But don't breathe on them wrong or else they fall out of their slot. So it if they or in a tool box drawer like mine they will all fall out all over every time you open or close your drawer. Make your own or buy better ones.
Scritto da: JerseyBoy0034
Yes please
These are the best for containing large four way angle wrenches up to 1 1/4” and still having them fit in a drawer. Also work great for double box end offset wrenches.
Scritto da: Chris A.
... this is the only one that is worth a crap. I wish they made version with one straight ...
I've tried several wrench organizers and this is the only one that is worth a crap. I wish they made version with one straight side for a slightly more efficient use of drawer space.
Scritto da: Gary Barrentine
Does a good job.
Fits in tool cart drawer. Keeps ratcheting wrench in place and organized. Does not slip when drawer is closed.
Scritto da: Tim
excellent
Solid low profile wrench rack will let you put a complete set of 15 wrenches into a low profile drawer. These have thick teeth and solid construction so they hold up well. The 15 wrench versions can be hard to find sometimes, so very happy to be able to buy them again. Use along with the reverse style to load up your drawer with little wasted space.
Scritto da: Mark T
The best wrench racks!
Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.
Scritto da: Mark T
Best wrench racks!!
Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.
Scritto da: Amazon Customer
Not sure why one picture says magnetic, because it is not.
Looks good, better suited for in a toolbox than hanging on the wall. Not sure why one picture states it is magnetic because it definitely is not. I bought this under the impression that it was magnetic.
Scritto da: Uncle Evil
Original Wrench Racks for a good price. Wish I could buy the reverse version ...
Original Wrench Racks for a good price . Wish I could buy the reverse version as well for the same price .

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array