POWERTEC 80024 Κανόνας Τ σήμανσης ακριβείας 6 ιντσών, Τετράγωνος χάρακας επεξεργασίας ξύλου από ανοξείδωτο χάλυβα για σήμανση, μέτρηση, γραφή εργαλείου 6 Τ κανόνας

Brand:POWERTEC

3.6/5

Ft
71.81

Παρουσιάζουμε τον χάρακα Τ σήμανσης ακριβείας 6 ιντσών από την POWERTEC. Αυτά τα εργαλεία σήμανσης ακριβείας βοηθούν στον εντοπισμό του αιχμηρού μολυβιού ή της γραφής σας με υψηλή ακρίβεια. Το T-Rule μας είναι τέλειο για την επεξεργασία ξύλου και την κατασκευή ντουλαπιών, επειδή χαράζει γραμμές ακριβώς εκεί που θέλετε να είναι. Ο χάρακας από ανοξείδωτο χάλυβα έχει μια σαφή, ευανάγνωστη κλίμακα με μόνιμες βαθιές σημάνσεις και διαβαθμίσεις για να διασφαλίζεται η μέγιστη αναγνωσιμότητα για πιο αποτελεσματικό σχέδιο γραμμών. Ο χάλυβας T-Rule είναι κατασκευασμένος από στιβαρό, εξαιρετικά ανθεκτικό και βαρέως τύπου ανοξείδωτο χάλυβα. Ένα καλό εργαλείο μέτρησης και εύκολο στη χρήση, ο ανοξείδωτος χάλυβας T-Rule διαθέτει ένα εντυπωσιακό τετράγωνο συνδυασμού που έχει βαθιά κλίμακα χάραξης για ανώτερη αναγνωσιμότητα και διαθέτει οπές και υποδοχές σήμανσης σε κάθε θέση κλίμακας 1/16, 1/32 και 1/64". για να καλύψετε τις ανάγκες σας. ΕυέλικτοΣυνήθως χρησιμοποιείται από ξυλουργούς, ξυλουργούς, σχεδιαστές, αρχιτέκτονες και μηχανικούς. Χαρίζει γραμμές οριζόντια, κάθετα, μακριές, κοντές, παράλληλες και με ορθή γωνία για να καλύψει τις ανάγκες σας. Περιεχόμενα πακέτου: (1) 6" T-Ruler(1) T-BarIncluded Hardware:(2) 1/4-20 x 1 /2 βίδες εξαγωνικής κεφαλής(2) 1/4 πλαστικές ροδέλες(2) 1/4-20 στρογγυλά πόμολα Στυλ: 6 ίντσες (περίπου 15,25 cm) Υλικό T-Rule: Ανοξείδωτος χάλυβας T-Bar (T-track) Εξωθημένο αλουμίνιο, Χρώμα: Το ανοδιωμένο GoldPOWERTEC είναι κορυφαίος κατασκευαστής εργαλείων και αξεσουάρ επεξεργασίας ξύλου υψηλής ποιότητας, μηχανημάτων και μιας ποικιλίας ανταλλακτικών OEM. Δεσμευόμαστε να υπερβούμε τις προσδοκίες, φέρνοντας παράλληλα τις πιο πρόσφατες καινοτομίες, τεχνολογία και ανάπτυξη προϊόντων στον κλάδο.

ΕΦΑΡΜΟΓΕΣ: Χρησιμοποιείται συνήθως για την επεξεργασία ξύλου, την κατασκευή ντουλαπιών, την ξυλουργική, την κατασκευή, τη διακόσμηση, το δίπλωμα βιβλίων και άλλες ανάγκες εργαστηρίου. PREMIUM ΚΑΤΑΣΚΕΥΗ: Κατασκευή από ανοξείδωτο χάλυβα για στιβαρότητα και μακροχρόνια ανθεκτικότητα, συν μια ράβδος t-χρυσού που είναι τοποθετημένη και ανοδιωμένη από αλουμίνιο με γυαλιστερό φινίρισμα. ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ: Κάθετα πόμολα λεπτομέρειας με κατσαρά παξιμάδια και οπές και υποδοχές σήμανσης σε κάθε θέση κλίμακας 1/16, 1/32 και 1/64". ΛΕΙΤΟΥΡΓΙΑ: Ευέλικτο χάρακα και εργαλείο σήμανσης υψηλής ακρίβειας που μπορεί να χαράξει οριζόντιες, κάθετες, μακριές, κοντές, παράλληλες και ορθογώνιες γραμμές για να καλύψει τις ανάγκες σας. ΠΕΡΙΛΑΜΒΑΝΕΙ: (1) Χάρακας 6" T-Ruler, (1) T-Bar, (2) 1/4-20 x 1/2 εξαγωνικές βίδες κεφαλής, (2) 1/4 πλαστικές ροδέλες, (2) 1/4- 20 στρογγυλά πόμολα.
Brand POWERTEC
Color Clear,Gold
Country of Origin Taiwan
Item model number 80024
Manufacturer POWERTEC
Material Stainless Steel
Product Dimensions 8.3 x 4 x 1.2 inches; 4.8 Pounds
Style 6" T rule

3.6

11 Review
5 Star
75
4 Star
16
3 Star
3
2 Star
1
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Scott
Good quality
Very good purchase. Great straight edge.
Scritto da: Adam N.
Very helpful to have around the garage/shop
This is very handy to have around. I have used to it set up my jointer. Very helpful for the task. Works good to check boards to make sure they are flat. I’ve used it to see that boards weren’t straight which I could then run through my jointer to get a straight edge to reference on the table saw fence. It’s quickly becoming something I’m reaching for often. A valuable tool to have around if you do any woodworking.
Scritto da: James and Nancy Rockwell
perfectly flat
I use this when flatten a slab to check that it's level
Scritto da: mohamed soud
trying to setup a jointer without it is frustrating
I bought this after I sent my jointer/planner machine to the workshop to fix it and found out they missed up the alignment so bad it isn't coplanar anymore. I tried for a week to adjust the beds or the blades to get good cut and it was either the jointer is cutting ok and the planner is giving me poor surface or the other way around, the best I could get without a true straight edge is a big snipe in the wood around 3 inches from the end, that drove me mad since I know the problem and the fix but yet don't have the tools to do it. I looked locally and all I could find is regular rulers thats not even straight for 10". I pulled the trigger and order it from amazon, I was worried since it'll take a long journey to be delivered to me in saudi arabia it'll be dented or bent but I received it in good condition and packed well. I fixed my machine and totally adjusted to work even better than when I bought it new in 3 hours as I had to measure some shims to and put them in place to true the beds to the cutter head. every shop need one of these. if you fix or adjust your own machine get one.
Scritto da: Roy
Solid straight edge with scale for reference
Solid and straight. It is nicely finished and plenty straight for woodworking. Great size for checking the flatness of your piece or setting up your tool beds. 38 is a great all around size. The scale (ruler) is a nice touch for reference. These are a bit thick to use as a measurement and marking tool, but that’s not their primary purpose.
Scritto da: H. L. Heafner
stiff and accurate
Love this thing, use it everyday mostly to see if my boards are straight so I can rip to size with confidence,
Scritto da: wclang
True Straight edge
This is my go to quality control tool used to ensure those critical cuts are perfect. Very nice finish and sturdy. Wish they made a longer version. I will be buying a shorter on for the tight spots.
Scritto da: William J. Edwards
Super high quality, heavyweight perfection
After having returned a straight edge for being super flimsy, I was almost dumbfounded by just how solid and heavyweight this one is. This straight edge is very well machined and will without a doubt last for generations.
Scritto da: Gustavo Aragon Garcia
Muy precisa y a un excelente precio
Estaba algo escéptico ya que el precio y las dimensiones eran para no entusiasmarse mucho, es larga casi ronda el metro y me costó por ahí de los 1,000 pesos muy por debajo de otras opciones en cuanto al precio y por arriba de las dimensiones, es por eso que crei que no sería tan buena, pero me lleve una muy grata sorpresa al checar que es muy precisa mucho muy precisa, así que estoy hasta el momento muy satisfecho con la compra y definitivamente es buena, bonita y barata.
Scritto da: Harman
Great product!
Great product, does what it is intended for, has weight and heft to it and is cheaper than the full metal ones. Highly recommend.
Scritto da: BRIAN CARR
Excellent workmanship
Makes a great saw guide.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array