POWERTEC 110060 Ζώνες λείανσης 4 x 24 ιντσών

Brand:POWERTEC

3.3/5

Ft
47.25

Παρουσιάζουμε τη ζώνη λείανσης από οξείδιο αλουμινίου 4" 4" x 24" της POWERTEC. Αυτό το premium πακέτο των 10 έχει σχεδιαστεί για να σας παρέχει ένα οικονομικό σετ ιμάντων λείανσης μεγάλης διάρκειας και υψηλής απόδοσης. Κατασκευασμένα με κόκκους οξειδίου του αλουμινίου (A/O) ανοιχτής στρώσης, λειτουργούν ως εργαλείο πολλαπλών χρήσεων που χρησιμοποιείται καλύτερα για τρίψιμο ξύλου, διαμόρφωση, απογύμνωση και δίνοντας λείο φινίρισμα σε πολλές από τις εφαρμογές επεξεργασίας ξύλου. Επιπλέον, αυτοί οι ιμάντες λειτουργούν εξαιρετικά καλά με τα λιθ και μη σιδηρούχα μέταλλα, αναμιγνύοντας συγκολλήσεις, υαλοβάμβακα, πλαστικό και καουτσούκ. Κάθε ζώνη επιδεικνύει ένα ντυμένο υπόστρωμα X-weight και διαθέτει ισχυρή ρητίνη στη ρητίνη με καλοδουλεμένες ραφές για μακροχρόνια αποτελέσματα. Είτε είστε επαγγελματίας είτε είστε τύπος DIY, αυτοί οι ιμάντες λείανσης βαρέως τύπου είναι συμβατοί με πολλά από τα γυαλόχαρτα go-to, συμπεριλαμβανομένων: Craftsman, Makita, Skil, Wen, Ridgid, Porter-Cable, Black+Decker, Bosch, Triton, Hitachi, Metabo και άλλα! Προδιαγραφές: Μέγεθος ιμάντα λειαντικού: 4 ίντσες x 24 ίντσες Μέγεθος Grit : 40 Υλικό: Premium Open Coat Oxide Aluminium (A/O) GrainBacking: Ισχυρό "X" Weight Cloth BackingArd: Stong Butt Joint ConstructionPackage: 10 τεμάχια Οδηγός επιλογής Grit:• 40 – 60 Grit: Heavy Tripping and Restripping: Griting1800 Tiny Imperfections• 240 – 400 Grit: Παρέχοντας ένα εξαιρετικά λεπτό λείο φινίρισμα ΗPOWERTEC είναι επαγγελματίας κατασκευαστής μηχανών επεξεργασίας ξύλου υψηλής ποιότητας, αξεσουάρ επεξεργασίας ξύλου και μεγάλης ποικιλίας ανταλλακτικών OEM. Δεσμευόμαστε να υπερβούμε τις προσδοκίες, φέρνοντας παράλληλα τις καλύτερες καινοτομίες, τεχνολογίες και ανάπτυξη προϊόντων στον κλάδο.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0709619854669

Κατηγορίες Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Ανταλλακτικά και αξεσουάρ εργαλείων φινιρίσματος ισχύος, Μέρη και αξεσουάρ δυναμικού τριβείου, Ιμάντες,

GRIT: Διατίθεται σε μεγάλη γκάμα ομοιόμορφων τρίγωνο - 40/ 60/ 80 / 100/ 120/ 150/ 180/ 240/ 320/ 400 grit. ΚΑΤΑΣΚΕΥΗ: Αυτοί οι ιμάντες λείανσης 4"x24" διαθέτουν υλικό ανθεκτικό στη θερμότητα και την υγρασία και σχεδιάστηκαν με εξειδικευμένες ραφές που δεν σπάνε υπό πίεση. PREMIUM GRADE: Κατασκευασμένο με την ανώτερη επένδυση X-Weight, με ανοιχτή επίστρωση κόκκων οξειδίου του αλουμινίου και μια εντυπωσιακή ρητίνη σε ρητίνη που εξασφαλίζει μακροχρόνια απόδοση. ΧΡΗΣΗ: Λειτουργεί με μια ποικιλία μηχανημάτων και εφαρμογών με ιμάντα λείανσης – παρέχοντας ένα εργαλείο απογύμνωσης και λείανσης βαρέως τύπου για ξύλο, αλουμίνιο, υαλοβάμβακα, καουτσούκ, πλαστικό και μη σιδηρούχα μέταλλα.

Amperage Capacity	11 Amps
Amperage Capacity	‎11 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	POWERTEC
Brand	‎POWERTEC
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 373 ratings 4.2 out of 5 stars
Grit Number	40
Grit Number	‎40
Grit Type	Coarse
Grit Type	‎Coarse
Included Components	‎POWERTEC 110060 4 x 24" Sanding Belts \| 40 Grit Aluminum Oxide Sanding Belt \| Premium Sandpaper For Portable Belt Sander – 10 Pack
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	10.3 x 3.9 x 3.6 inches
Item Dimensions LxWxH	‎10.3 x 3.9 x 3.6 inches
Item model number	‎110060
Item Package Quantity	‎1
Item Weight	‎1.89 Pounds
Manufacturer	‎POWERTEC
Material	‎Aluminum
Part Number	‎110060
Product Dimensions	‎10.3 x 3.9 x 3.6 inches
Size	‎40 Grit

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Shane Grey

90 minutes of use per belt on average

I'm sanding hardwood floors with these using 40 grit in a Makita belt sander. The sander and paper get pretty hot while working. Even the floor gets warm. It's a powerful belt sander. For material removal these are working great. They fit right, and they work as expected. But for durability they are not at all good. I would guess that whatever adhesive they use at the seam can't stand up to the normal operating temperature when using for more than a couple minutes continuously. I've gone through 6 belts after about 9 hours of sanding my floors. I went over the floors with a drum sander with 36 grit first, so it's mostly bare wood at this point and I'm using the belt sander to clean up spots the drum sander didn't do well. Overall I think I've covered about 120 sqft of wood surface using these 6 belts. I'm not even done touching up one small bedroom yet. That's 20 sqft per belt of sanding already stripped wood. I'd say these are ok belts if you are just occasionally running the sander over some furniture for 30 seconds before switching to a less aggressive tool. But if you are running the sander for more than a few minutes at a time, you can expect these to shred long before the grit is at all worn out. My shredded belts mostly look like new other than where they broke at the seam and then tore down the length. In fact I'm keeping them as scraps to use on other projects because the paper is perfectly ok. The worst part is probably that in the process of breaking they usually throw some sparks as they get jammed in some part of the sander, sometimes bounce off the floor leaving a scuff and deep scratches, and most recently have tore up the rubber coating on one side of the powered drum of my sander. So, you might save money buying the belts. But if you are doing floors, expect to lose time and cause damage to your floor and sander. Seems like a bad trade off now that I've experienced it. I should have listened to the poor reviews here instead of the far greater number of "works well for me" that don't give much detail.

Scritto da: Henry M. Anderson

as advertised, cuts well.

fit and tracked fine on my belt sander. cut nicely.

Scritto da: M.G.M.

Pretty good product

Pretty good product

Scritto da: Guile

Repeatedly tore apart within 5 minutes

Have bought these in the past and they did fine for a smaller belt sander. These did horrible, howerever, and none have stayed together. I bought a 10 pack of 40 grit, 120 grit, 240 grit, and 360 grit. 40 pieces. 2 of the 120 and 5 of the 40 grit have all done the exact same thing. Within 5 minutes of use they tear apart. Sometimes getting jammed up in thr sander. Sometimes they fly apart with a vengeance. The first one i thought maybe i had thr direction wrong but afterwards i checked every single one to be sure. Every one is tearing apart at the tape that holds it together.

Scritto da: William A Lehne JR

Best bang for the buck

They lasted a lot longer than I thought they would. 3M makes the best sand belts but these belts were very comparable. The ends never failed and staid put and didn't slide.

Scritto da: gary s. webb

Great value

I needed to strip solid color oil base stain from my front porch. The belts never broke or tore and seemed to last a long time. In matter of fact I saved all used 8 belts. I only changed them because I felt a new belt would be less work on my belt sander. I am not a professional and hit many deck screws.

Scritto da: Bill Williams

Durable Sanding Belts at an Affordable Price

I bought these on Amazon after first purchasing a 2-pak of Craftsman belts at Lowe's. On of the two CM belts came apart after using it less than 5 minutes. I received the Powertec belts and noticed the quality right away. I used the first one for over an hour before changing to the second belt. They cut right through the paint on my deck and never broke one. I will be buying this brand again!

Scritto da: Amazon Customer

best belts out there

these are fantastic. I do heavy duty sanding, and I was shocked that these hold up as good or better than the best belts out there

Scritto da: RC

Exceeded expectation

Performed very well, I was impressed with the durability. Stripped a small-sized deck for a new stain within half a pack of belts. Breakage didn't happen unexpectedly, more broke from abuse than from actual failures.

Scritto da: Craig Hull

Worth the money

These work as expected