Pond Armor SKU-TAN-QT-R Μη τοξική εποξειδική βαφή Pond Shield, 1,5-Quart, Tan

Brand:Pond Armor

3.4/5

Ft
129.67

Το Pond Shield είναι μια μη τοξική εποξειδική επένδυση, κατασκευασμένη στις ΗΠΑ, σχεδιασμένη για τη βιομηχανία λιμνών και χαρακτηριστικών νερού. Χρησιμοποιείται για την αδιαβροχοποίηση και τη σφράγιση στοιχείων νερού ή λιμνών με πιο ντιζάιν, επίσημη ή φυσική εμφάνιση από τις λαστιχένιες επενδύσεις. Η χρήση του εποξειδικού Pond Shield δεν σημαίνει άλλες αντιαισθητικές πτυχές ή τσακίσεις. Επιπλέον, σε αντίθεση με τις λαστιχένιες επενδύσεις, υπάρχουν έντεκα βασικά χρώματα διαθέσιμα - Μαύρο, Γκρι ανθρακί, Καφέ Σοκολάτα, Διαφανές, Μπλε Ανταγωνισμού, Μπλε Δέλτα, Γκρι, Πράσινο βρύο, Μπλε του Ουρανού, Μαύρισμα και Λευκό. Το Pond Shield χρησιμοποιείται για τη στεγανοποίηση δομημένων επιφανειών που βρίσκονται σε υδάτινα στοιχεία όπως λίμνες Koi, πισίνες, σιντριβάνια, ενυδρεία, δεξαμενές αλμυρού νερού, υδροπονία, ρέματα, καταρράκτες, ανακλαστικές πισίνες, μίνι λίμνες, δεξαμενές συγκράτησης κ.λπ. Εφαρμόζεται εύκολα και εύκολα για τη συντήρηση και για τις περισσότερες εφαρμογές, μια εφαρμογή με μία στρώση είναι το μόνο που χρειάζεται για τη σωστή κάλυψη. Επιπλέον, η λίμνη σας θα είναι ουσιαστικά χωρίς συντήρηση με μια επιφάνεια από την οποία μπορούν εύκολα να σκουπιστούν τα φύκια και είναι ασφαλής για ψάρια (και άλλα άγρια ​​ζώα) και φυτά. Το Pond Shield προσφέρει τόσο αντοχή όσο και ευελιξία σε μια επίστρωση στην πραγματικότητα, αντοχή και ευελιξία που ελέγχεται από -78 βαθμούς F έως 140 βαθμούς F. Το Pond Shield είναι μια εποξειδική επένδυση λίμνης που έχει σχεδιαστεί ειδικά για να κολλάει σε πορώδη ή αποξεσμένα υλικά όπως σκυρόδεμα, ξύλο, πέτρα, τα περισσότερα μέταλλα (επεξεργασμένα και μη), τούβλα, τα περισσότερα πλαστικά με ραβδώσεις, πλακάκια και πολλά άλλα. Με αντοχή σε εφελκυσμό ισχυρότερη από την εσωτερική αντοχή του σκυροδέματος, μια μόνο στρώση εποξειδικού Pond Shield θα κολλήσει σε αυτό που το εφαρμόζετε. Με την πάροδο του χρόνου, μπορεί να δημιουργηθούν ρωγμές σε αρμούς από σκυρόδεμα, κονίαμα ή ενέματα. Όντας ευέλικτο, το Pond Shield αντιστέκεται στη μίμηση ρωγμών σε αυτές τις περιοχές και παρέχει την καλύτερη δυνατή προστασία σε μια επίστρωση.

Μπορεί να εφαρμοστεί σε οποιαδήποτε κατασκευασμένη επιφάνεια από ξύλο μέταλλο ή πέτρα καθώς και στα περισσότερα πλαστικά και άλλες επιστρώσεις. Μπορεί να τεθεί σε λειτουργία σε μόλις 24 ώρες. Η φόρμουλα αυτόματου ασταρώματος επιτρέπει την αξιόπιστη πρόσφυση για μια τελική επιφάνεια που είναι εύκολη στη συντήρηση. Ειδικά σχεδιασμένο για υποβρύχια χρήση και για να είναι μη τοξικό και ασφαλές για ψάρια και φυτά. Αδιάβροχη φόρμουλα κατάλληλη για χρήση σε ένα ευρύ φάσμα κλιματικών περιβαλλόντων από θερμό έως παγετό/απόψυξη.
Age Range (Description) Adult
Brand Pond Armor
Color Tan
Customer Reviews 4.4 4.4 out of 5 stars 136 ratings 4.4 out of 5 stars
Finish Type Gloss
Full Cure Time 24 Hours
Indoor/Outdoor Usage Outdoor
Is Discontinued By Manufacturer No
Is Waterproof True
Item Form Liquid
Item model number SKU-TAN-QT-R
Item Volume 1.5 Quarts
Item Weight 0.01 ounces
Manufacturer Pond Armor
Model Name SKU-TAN-QT-R
Package Information Can
Product Dimensions 11.5 x 5.5 x 5.5 inches
Size 48 Fl Oz
Size 48 Fl Oz (Pack of 1)
Special Feature Non Toxic
Specific Uses For Product Interior/Exterior
Surface Recommendation Concrete
Unit Count 1.0 Count

3.4

11 Review
5 Star
67
4 Star
19
3 Star
7
2 Star
2
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Amazon Customer
Pond paint
So far so good the paint is really thick how to thin down with alcohol the first time trying to paint was rough after I send it down it went on real nice not sure how long it’s going to last just put it on will see you next year
Scritto da: Kieran
Pretty good product
I used this to coat a plywood terrarium that will hold hermit crabs. The cans are not easy to manage, it gets everywhere, but once out of the cans it's easy to mix. I used 91% isopropyl alcohol to thin the mixture. My only complaint is that it didn't cover as much as it was supposed to (60 sq ft). Otherwise, I would recommend and use it again.
Scritto da: Sundown
Works well, but pay attention to the working time
This is easy to mix and use, and the two parts will remain usable in their cans if you don't need it all at once. The working time of epoxy is about 20 minutes, so depending on what you're doing, you may or may not be able to spread it all before it hardens. In my experience, it goes from liquid to chunky to unusable in about three minutes on a warm day. It has a glossy finish when hardened.
Scritto da: Manuel
Works great
It works great just don't mix too much. It dries really quick. It creates heat when mixed so don't mix it all at once unless your going to pour it out and spread it all.
Scritto da: Amazon Customer
Good quality
Was perfect for my fountain
Scritto da: LoneWolfe
This Did The Job!
I used this for sealing a leaking fountain. I followed the directions precisely and the results were excellent. No more leaks! Having colors (including clear) other than black or white is a big plus, I chose tan. For those that have remarked about the coverage not being 60 square feet for the 1.5 quart kit, I would agree. But remember, the 60 square feet was simply based on the thickness of the coat. If the coat thickness is .02 inches instead of .01 inches (10 mil), the coverage drops to 30 square feet. I had a fairly small project so coverage was not an issue. The thickness on the bottom of the fountain had to be at least .125 inches. Still, I think the manufacturer should make the coverage value 30-60 square feet. One final note. Work fast with this stuff because when it starts to set, the painting is over.
Scritto da: Tony from Florida
What a life saver and a $$$ saver!
What a life saver. My pool's fountain developed a few leaks in the basin of the fountain over the years. It got bad this year. I talked to a contractor who wanted a small fortune to fix the leaks. After a little investigation I ran into this product and a few nice reviews. I bought this, read the instructions, mix the epoxy and hardener, and painted 2 coats on the basin waiting for the 1st coat to dry. You have to work quickly due to how quick the hardener dries. 2 months have gone by and not one drop of pool water has leaked out. I did find that it took about 1/3 to 1/2 of the epoxy to put the two good coats on and area of about 3 square feet. If, in the future, it develops another leak I have enough to coat it again.
Scritto da: Fly Guy
No leaks!
I haven't worked with epoxy much, so I can't compare pond Armor epoxy to any other, but if results are what count, I glad I finally bought this epoxy! The concrete spillway between my ponds had been leaking for years, and I had to refill the lower pond after only a few hours. After power washing the whole area to get rid of built-up gunk, I carefully rolled a double coat of Pond Armor epoxy onto the spillway and the leaks are gone! I can now run the waterfall all day without significant water loss. I'm delighted!
Scritto da: Robert Boucher
It was missing the second can!
The product was only half inside. Only had one can when it clearly should have had two. Update: They replaced the second can when shipping weight was clearly half what it should have been.
Scritto da: Kam Leung
Good products
Very good product
Scritto da: Karen Goreham
Big colour
Cover good

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array