Βούρτσα θαλάμου Otis 5,56mm

Brand:‎Otis Technology

3.8/5

Ft
26.69

Τα προϊόντα μας έχουν σχεδιαστεί για να είναι τα καλύτερα και κατασκευάζονται στις ΗΠΑ με υλικά υψηλής ποιότητας με τα υψηλότερα βιομηχανικά πρότυπα..

Το στέλεχος ορείχαλκου συγκολλάται εν ψυχρώ μέχρι τον πυρήνα και η άκρη είναι διπλωμένη, δεν κόβεται. Οι ατσάλινες τρίχες στη βάση τρίβουν τον αστεροειδή θάλαμο των ωτίδων ασφάλισης. Οι κωνικές χάλκινες τρίχες τρίβουν το θάλαμο, το λαιμό και τον ώμο. 8-32 Μέγεθος νήματος. Καθαρίζει το θάλαμο τουφέκι 5,56mm. Η Otis προσπαθεί να εισάγει τις νεότερες και πιο προηγμένες τεχνολογίες στην αγορά καθαρισμού όπλων. Όλα τα προϊόντα και τα εξαρτήματά μας κατασκευάζονται και συναρμολογούνται σε μια υπερσύγχρονη μονάδα παραγωγής στο Lyons Falls και στο Phoenix της Νέας Υόρκης. Όλα τα προϊόντα κατασκευάζονται στις ΗΠΑ!.
Brand Name ‎Otis Technology
Color ‎Multi
Customer Reviews 4.7 4.7 out of 5 stars 859 ratings 4.7 out of 5 stars
Handle Material ‎Alloy Steel
Included Components ‎Otis 5.56MM Chamber Brush FG-367 HT
Item Dimensions LxWxH ‎1 x 1 x 1 inches
Item Package Dimensions L x W x H ‎4.84 x 1.61 x 0.79 inches
Item Weight ‎0.16 Ounces
Manufacturer ‎Otis Technology
Material ‎Blend
Model Name ‎FG-367 HT
Package Weight ‎0.02 Kilograms
Part Number ‎FG-368 HT
Size ‎One Size
Sport Type ‎Hunting
Suggested Users ‎unisex-adult

3.8

9 Review
5 Star
81
4 Star
13
3 Star
4
2 Star
1
1 Star
1

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: CumminsD
Does the job!
It does the job it was intended to do.
Scritto da: Baklash
It’s the best.
I use this on my AR rifle to clean the chamber. It does a great job. Like it so much I bought 3 more, one for my nephew, son in law, and grandson.
Scritto da: RatherLiveInKeyWest
Otis M-16 Chamber Brush - 5.56mm - Cleans well - Extremely tight fit and left a couple copper bristle behind
We have used star pads for cleaning the chamber in the past, but wanted to get a bit more aggressive with the build-up. This seemed like just the right additional to our cleaning kit based on reviews. I have the right rod set, cleaners and lube. It is a good tool for the purpose, the bristles do work well to break loose the deep seated grime, but this chamber brush is not perfect. It is incredibly tight, so much so that I worry about marring. Afterwards I noticed several copper bristles left behind in the chamber, laid down tight in the crevices such that a pointy pick was needed to get in there and lift an end allowing tweezers to lift the bristle out. That was an unexpected pain; hopefully that will not be commonplace as the bristles break in a bit and become easier to use. Cleaned well. Had a few issues. Might get better with time. Will come back and revise review if future applications do not show improvement over first use.
Scritto da: Zach B.
Effective Product; Makes Live Easier
Very handy brush. Works well to loosen up all the chamber fouling so it can be cleaned out with a bore snake and an AR cleaning star. I just squirt some Zippo fluid on it, push it in, and rotate it a few times around (Zippo fluid is a decent solvent that evaporates without residue, so you don't have to work hard to then clean out the solvent you just used). The one thing to know is that it fits tightly in the chamber, so you can't just spin the cleaning rod with your fingers. If your cleaning rod has a fixed handle at the end that will work. If the handle spins, you'll need something to grip the cleaning rod so you have enough torque to rotate it. I clamp a pair of vise grips to the cleaning rod and then just rotate the vise grips. Works out great. I don't fault this product for that drawback, so much as the makers of most cleaning rods.
Scritto da: superbeau
Seems to work pretty well
I bought this to clean a 223 Wylde that I recently built. It seems to work well on the end of a pistol cleaning rod. I didn't realize at first, but you're supposed to insert and then spin it clockwise. I thought it was more of an in/out motion (ha!). Do this first, then clean the barrel from chamber to muzzle and you're good to go.
Scritto da: rc
Does the job
Gun owners are a good breed. We will help everybody out. Who else can say that?
Scritto da: Hawkeye
Quality I expect from Otis
This brush is definitely the same quality I have come to expect from Otis, which is top notch. This brush cleans those very difficult nooks around the chamber very well. I have used this brush for around 200 passes through my AR now and it is still looking like new. I will note that you do need a rod, the Otis pull through system just does not have enough tensile strength to get this all the way into the chamber easily. So if you only have an Otis puck system be sure to build a rod into your cost (a short handgun rod works great). It is a specialty brush and it does cost a lot for what it is, but it works well and it seems like it is going to work for a long time as well. 5 Stars.
Scritto da: james lynch
It works
Does as its advertised.
Scritto da: Doug Somerville
Five Stars
You really need this to do a good cleaning...

Σχετικά προϊόντα

hot
Pro-Shot .38 Caliber Chamber Brush
3.5/5

Ft 24.42

Pro-Shot .38 Caliber Chamber Brush
3.5/5

Ft 24.42

hot

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array