Orbit 58136N Θηλυκό ορειχάλκινο στέλεχος με σφιγκτήρες

Brand:Orbit

3.6/5

Ft
30.39

Από τον κατασκευαστή Η Orbit είναι η κορυφαία εταιρεία της Βόρειας Αμερικής για το πότισμα κατοικιών. Με παρουσία σε περισσότερες από 180 χώρες και 6 ηπείρους, προσφέρουμε το πιο ολοκληρωμένο οικοσύστημα λύσεων σε λάστιχο βρύσης, σωλήνα, άκρο σωλήνα, υπόγειο, στάγδην, ομίχλη και προστασία αυλής. Για περισσότερο από μισό αιώνα, έχουμε οδηγήσει τη βιομηχανία σε καινοτόμες λύσεις, συγκεντρώνοντας πάνω από 100 ενεργές πατέντες και πολλά βραβεία αναγνώρισης του κλάδου. Από το PVC-Lock, το Blu-Lock και το Drip-Lock, που είναι ένας εξαιρετικά γρήγορος τρόπος σύνδεσης σωλήνων καταιονισμού και σωλήνων στάγδην, έως τους τεχνολογικά προηγμένους, έξυπνους ελεγκτές B-hyve με τις μεγαλύτερες πωλήσεις, εκσυγχρονίσαμε τη βιομηχανία, ορίσαμε το πρότυπο για τις βέλτιστες πρακτικές άρδευσης κατοικιών και έκανε αποτελεσματικό το πότισμα σε εξωτερικούς χώρους για νοικοκυριά σε όλο τον κόσμο. Το Hydro-Rain είναι το πρωτοποριακό εμπορικό και γεωργικό αντίστοιχο του Orbit, με προσφορές BUILT FOR SPEED που έχουν σχεδιαστεί ειδικά για επαγγελματίες εργολάβους και καλλιεργητές. Μαζί, η Orbit και η Hydro-Rain αποτελούν μια επιχειρηματική μονάδα εντός του τμήματος Gardena του Ομίλου Husqvarna, που περιλαμβάνει συλλογικά τον μεγαλύτερο κατασκευαστή οικιακών ποτίσματος στον κόσμο. Επειδή η διασφάλιση της πρόσβασης σε ασφαλές γλυκό νερό για τις κοινότητες αποτελεί παγκόσμια προτεραιότητα, είμαστε υπερήφανοι που επιβεβαιώνουμε τη δέσμευσή μας να παρέχουμε ένα ολοκληρωμένο οικοσύστημα έξυπνων λύσεων, που καλύπτουν εφαρμογές ΑΠΟ ΤΗ ΒΡΥΣΤΗ ΣΤΗ ΦΑΡΜΑ, καθώς επιδιώκουμε συνεχώς το όραμα της ΑΛΛΑΓΗΣ ΤΟΥ ΤΡΟΠΟΥ ΤΟΥ ΚΟΣΜΟΥ ΝΕΡΟΥ .

Δεν υπάρχουν διαθέσιμες μονάδες
Για εξωτερική χρήση μόνο με κρύο νερό. Σφιγκτήρας από ανοξείδωτο χάλυβα. Ανθεκτική ορειχάλκινη κατασκευή. Παρατείνει τη διάρκεια ζωής του σωλήνα σας. Επισκευάζει το άκρο σύνδεσης βρύσης (Γυναικεία) των περισσότερων 5/8 τυπικών σωλήνων κήπου.
Brand Orbit
Customer Reviews 4.5 4.5 out of 5 stars 518 ratings 4.5 out of 5 stars
Exterior Finish Brass
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 4 x 4 x 2 inches
Item model number 58136N
Item Weight 0.08 Pounds
Item Weight 1.28 ounces
Manufacturer Orbit
Material Brass
Product Dimensions 4 x 4 x 2 inches

3.6

10 Review
5 Star
73
4 Star
15
3 Star
7
2 Star
3
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Joanne S.
This one pivots
I was looking for a solid one that does not swivel or pivot. I use it anyway with a small leak because it is in a stressed position. Couldn't find a solid one , I guess, on Amazon.
Scritto da: Nate
Perfect Replacement Shank
This is a great replacement shank, glad I purchased it. The 3' lead in hose to my reel was accidentally split open by a sheet of plywood late last fall. I was going to purchase a new one but thought of going this route instead. I used a socket wrench to tighten the clamp in leiu of using a screwdriver as suggested by a reviewer; tight as a drum with no leaks whatsoever. Read from some that it's not as thick as it could be, which is true, but this was pretty much a once and done connection for me. Even if you had to replace it after every season, which I highly doubt, it would still be a lot cheaper than purchasing a new hose.
Scritto da: ThatMouse
Makes hand tightening harder, but works as advertised
Initially it was leaking around the two metal pieces. I had to wrench tighten it onto the spigot to stop the leak. The problem is the metal clamp gets in the way and digs into your hand screwing it on. I don't think this the greatest "brass" alloy, so I'll just watch it for corrosion.
Scritto da: Sirronalot
Very easy to install!
Wow. Usually it is so difficult to install these and this hose end was so easy to install and water tight! I am buying more! I rarely write reviews, but I am so happy with these hose ends, that it really inspires me to create better irrigation for my yard! I am very happy!
Scritto da: Glen Rasmussen
Easy to use.
Easy to use. Simply cut your old hose about a few inches from the connector. Install the clamp over the hose. Push the cut end of the hose over the tapered end. Slide the clamp over the end and tighten the philips screw. Install the end as you would a regular hose.
Scritto da: Dinko Perkovic
Does the job
I had to put hose end into boiling water to soften it enough and slide over this adapter; makes for tight connection, though. Not top of the line, but sturdy enough an decent value for the money; would recommend.
Scritto da: Whit
Ok
Meh. It’s ok for the price. I don’t know that I’ll order it again but for the price it’s ok. I add flex glue when ever I mend a hose so it’s definitely not leaking but I can tell it’s not very well made. Just glad the price was right.
Scritto da: GJSD
Light duty but it works well
7/13/19: Cut off the old hose end that was leaking (pin holes had developed in the metal), and replaced it with this. Works, doesn’t leak, but it feels like a light duty replacement. Should be fine for us as we don’t remove it more than a few times a year.
Scritto da: asif
Very useful
It solved my problem and working well
Scritto da: kerri
never deliveeed
was not included with the rest of the shipment

Σχετικά προϊόντα

hot
Κλείδωμα NU-SET
3.6/5

Ft 29.11

Κλείδωμα NU-SET
3.6/5

Ft 29.11

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array