Orbit 35809 PVC-Lock Release Tools, Μικτά

Brand:Orbit

3.4/5

Ft
30.64

Από τον κατασκευαστή Η Orbit είναι η κορυφαία εταιρεία της Βόρειας Αμερικής για το πότισμα κατοικιών. Με παρουσία σε περισσότερες από 180 χώρες και 6 ηπείρους, προσφέρουμε το πιο ολοκληρωμένο οικοσύστημα λύσεων σε λάστιχο βρύσης, σωλήνα, άκρο σωλήνα, υπόγειο, στάγδην, ομίχλη και προστασία αυλής. Για περισσότερο από μισό αιώνα, έχουμε οδηγήσει τη βιομηχανία σε καινοτόμες λύσεις, συγκεντρώνοντας πάνω από 100 ενεργές πατέντες και πολλά βραβεία αναγνώρισης του κλάδου. Από το PVC-Lock, το Blu-Lock και το Drip-Lock, που είναι ένας εξαιρετικά γρήγορος τρόπος σύνδεσης σωλήνων καταιονισμού και σωλήνων στάγδην, έως τους τεχνολογικά προηγμένους, έξυπνους ελεγκτές B-hyve με τις μεγαλύτερες πωλήσεις, εκσυγχρονίσαμε τη βιομηχανία, ορίσαμε το πρότυπο για τις βέλτιστες πρακτικές άρδευσης κατοικιών και έκανε αποτελεσματικό το πότισμα σε εξωτερικούς χώρους για νοικοκυριά σε όλο τον κόσμο. Το Hydro-Rain είναι το πρωτοποριακό εμπορικό και γεωργικό αντίστοιχο του Orbit, με προσφορές BUILT FOR SPEED που έχουν σχεδιαστεί ειδικά για επαγγελματίες εργολάβους και καλλιεργητές. Μαζί, η Orbit και η Hydro-Rain αποτελούν μια επιχειρηματική μονάδα εντός του τμήματος Gardena του Ομίλου Husqvarna, που περιλαμβάνει συλλογικά τον μεγαλύτερο κατασκευαστή οικιακών ποτίσματος στον κόσμο. Επειδή η διασφάλιση της πρόσβασης σε ασφαλές γλυκό νερό για τις κοινότητες αποτελεί παγκόσμια προτεραιότητα, είμαστε υπερήφανοι που επιβεβαιώνουμε τη δέσμευσή μας να παρέχουμε ένα ολοκληρωμένο οικοσύστημα έξυπνων λύσεων, που καλύπτουν εφαρμογές ΑΠΟ ΤΗ ΒΡΥΣΤΗ ΣΤΗ ΦΑΡΜΑ, καθώς επιδιώκουμε συνεχώς το όραμα της ΑΛΛΑΓΗΣ ΤΟΥ ΤΡΟΠΟΥ ΤΟΥ ΚΟΣΜΟΥ ΝΕΡΟΥ .

Τα εξαρτήματα που έχουν εκτεθεί σε υπερβολική πίεση νερού ή/και σφύρα νερού μπορεί να είναι δύσκολο να αφαιρεθούν. Χρησιμοποιείται για την εγκατάσταση συστημάτων καταιωνιστήρων PVC - σχεδιασμένο για χρήση με το Πρόγραμμα 40, το Πρόγραμμα 80 και το Class 200 PVC. Λειτουργεί σε εξαρτήματα PVC-Lock 1 ίντσας και 3/4 ιντσών. Απελευθερώνει εξαρτήματα PVC-Lock από σωλήνα PVC.
Brand Orbit
Color Mixed
Exterior Finish PVC
Item Dimensions LxWxH 1.75 x 3.9 x 7.25 inches
Item model number 35809
Item Weight 0.01 Ounces
Manufacturer Orbit
Material Pvc
Number of Pieces 1
Product Dimensions 1.75 x 3.9 x 7.25 inches; 0.01 Ounces

3.4

9 Review
5 Star
63
4 Star
20
3 Star
9
2 Star
4
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Shemers
3/4" works great, 1/2" not so much
I used the 3/4" fittings to pressure test a pvc assembly that was going to be hard to get to once installed. I used a cap on one end and a threaded adapter on the other. I bought a hose adapter that fit on the threaded end so that I could pressurize it. After testing I was able to remove the cap and the threaded adapter using the removal tool. The connectors went on and came off easy. They don't leak at all. That's the good news. The bad news is that when I tried something similar with 1/2" pvc the connector went on and sealed just as well, but they do not come off very easily. I was able to get the removal tool all the way in, but the little metal teeth in the connector were still dug in to the pvc. I was able to get the connector off by twisting and pulling, but it chewed up the end of my pipe. I have tried multiple fittings and 2 sets of release tools with the same result. I have also tried putting the connector on and removing immediately without ever pressurizing to see if the problem was from over pressurizing. It still scored the end of my pipe. I was hoping that I could use these to make a temporary seal that I could latter remove and glue a permanent connector in its place. With the pipe so badly scored, I think I will have to cut off the end first to get a good glue seal. I have not tried the 1" size yet.
Scritto da: S.S.
Very Useful Tool!
Set up a backup, satellite sprinkler system from the spigot in the backyard. When disconnecting that system in the late fall, this tool makes it a cinch. slide down into the connector and turn and you're disconnected in seconds. Everything reconnects with no issue, either. Worth the minor investment to save a ton of time.
Scritto da: LLP
Must have for Orbit pvc connectors
We used a few of the Orbit 3/4 quick couplers for non pressure pvc line. They are very easy to use and seem to work great. The Orbit release tool is a pretty much must have if you ever plan on taking them apart again. Only used the 3/4 tool so far. The tool is easy to use and releases the connecting barbs without any trouble
Scritto da: Hazard Area
Worked Great
I was fixing a 3/4" underground pipe with the 18" locking flexible pipe sold on this site, and wanted these tools in case I made a mistake and wanted to remove the flexible pipe. I didn't have to use the lock release took, but did use the deburring tool and it worked like a champ. What sold me on this kit is that they threw in the deburring tool with the lock release tools, which I thought was great.
Scritto da: 1 Bama Boy
Get the job done!
Perfect tools for the job. Worked on 3/4 PVC irrigation plumbing. Had my leak fixed in 15 minutes.
Scritto da: Theguyoverthere
Works great
I messed up and tried using a PVC Lock Slide to patch a puncture in my black 1 inch sprinkler line. It didn't work at all. The Orbit 35809 PVC-Lock Release tool set worked great and as advertised. It take a bit of practice to finagle it all the way into the lock slide side, but once pushed all the way, the pipe came right out. Now I can return the wrong part and get the correct one.
Scritto da: Judy Caunter-Crawford
Consider two sets of you need to replace an manifop
They work great. Use it to attach manifolds so we do not need to cut pipe when replacing manifolds. But we needed two to release manifold since the pipes are inches away from each other
Scritto da: S Moore
Do not mistake for eco-lock release tools
I mistook these for eco-lock release tools... not compatible.
Scritto da: Groot
Built with cheap plastic around the extremely sharp flimsy tin/stainless ...
Built with cheap plastic around the extremely sharp flimsy tin/stainless they use to slide into the fitting. For the most part, I ended up cutting off the existing fitting and putting a new one on rather than using these. The plastic started peeling off after first use.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array