Δύσκολο στερέωμα 014973242183 Fine Finished Hex Nuts, 3/4-16, Piece-3 3/4-16-Inch

Brand:Hard-to-Find Fastener

3.4/5

Ft
29.12

Διαθέτουμε μεγάλη ποικιλία συνδετήρων ιδανικών για πολλές εφαρμογές στο σπίτι, τη φάρμα, τις επιχειρήσεις, την αυτοκινητοβιομηχανία και τη βιομηχανία. Οι περισσότεροι από τους συνδετήρες μας έχουν ελαφριά επίστρωση ψευδαργύρου πάνω από χάλυβα δίνοντας ένα πιο ανθεκτικό στη σκουριά φινίρισμα. Πουλάμε επίσης επικαλυμμένα και ανοξείδωτα προϊόντα για πρόσθετη αντοχή στη σκουριά. Διαθέτουμε πολλές ποιότητες συνδετήρων, από χάλυβα χαμηλής περιεκτικότητας σε άνθρακα έως σκληρυμένο, θερμικά επεξεργασμένο χάλυβα. Δεν ισχύουν όλοι οι συνδετήρες για όλες τις εφαρμογές, επομένως φροντίστε να δοκιμάσετε διεξοδικά και να λάβετε τη γνώμη ενός αδειοδοτημένου κτιρίου ή πιστοποιημένου κτιρίου ή δομικού μηχανικού προτού βασιστείτε σε αυτούς τους συνδετήρες για οποιεσδήποτε περιπτώσεις όπου η αστοχία θα είχε ως αποτέλεσμα ζημιά σε ιδιοκτησία ή σε άτομα.

Τύπος οδηγού: 1-1/8 γαλλικό κλειδί. Φινίρισμα: Ψευδάργυρος. Υλικό: Χάλυβας. Πάχος: 41/64 ίντσες. Διάμετρος: 3/4.
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎Hard-to-Find Fastener
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 38 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Drive System ‎External Hex
Exterior Finish Zinc
Exterior Finish ‎Zinc
Fastener Type Hex
Fastener Type ‎Hex
Finish ‎Zinc
Finish Type ‎Zinc
Grade Rating ‎Grade 2
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎2.5 x 1.44 x 1.25 inches
Item model number ‎014973242183
Item Package Quantity ‎1
Item Weight ‎0.02 Pounds
Item Weight ‎0.32 ounces
Manufacturer ‎Hard-to-Find Fastener
Material Steel
Material ‎Steel
Measurement System ‎Inch
Metal Type Alloy Steel, Carbon Steel
Metal Type ‎Alloy Steel, Carbon Steel
Part Number ‎HNS-299-3
Product Dimensions ‎2.5 x 1.44 x 1.25 inches
Size ‎3/4-16-Inch
Thread Size 3/4"-16
Thread Size ‎3/4"-16
Thread Type ‎Fine

3.4

8 Review
5 Star
82
4 Star
0
3 Star
5
2 Star
0
1 Star
13

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Discerning Shopper
It’s a fine nut
No problems as far as nuts go.
Scritto da: Mac
It’s a nut
It's a nut. It’s the correct size. It worked perfectly.
Scritto da: Dianne Jordan
Poor quality nuts!
These nuts are such poor quality that I thought they were incorrect threads.. I got 20 nuts, every one had to be run through a tap several times to get them to thread onto a 7/16X 20 tpi bolt. You need to get one of your product specialists to look into this problem. I’m betting they were chromed incorrectly.
Scritto da: Kelly Taft
3/4 16 left hand nuts lousy do not fit
Do not work poorly made
Scritto da: Russell Harrison
Five Stars
These nuts were used to create various sanding discs, etc. for pen making on the lathe.
Scritto da: Arv
I got what I ordered
Just what the doctor ordered
Scritto da: AHCII
These nuts!
Well built, no issues with fit and finish or quality!
Scritto da: Dave DeVries
Nice quality and finish
These fit perfectly for what I was doing. I'm happy with the finish and quality.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array