Moen 8730 Home Care Grab Bar 30 ιντσών, ανοξείδωτη

Brand:Moen

3.8/5

Ft
73.26

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Από ανοξείδωτο ατσάλι 1-1/4 ιντσών κρυφή ράβδος λαβής βίδας 30 ιντσών είναι κατασκευασμένη από 20 gauge, 304 ανοξείδωτο χάλυβα με σατινέ φινίρισμα: ο πατενταρισμένος σχεδιασμός φλάντζας ασφαλούς στήριξης επιτρέπει την εγκατάσταση με 3 βίδες στο υλικό του καρφιού περιλαμβάνεται φλάντζα από ανοξείδωτο χάλυβα κουμπώνει το κάλυμμα σε δοκιμασμένη χωρητικότητα έως 500 LB. Η ικανότητα έλξης βάρους, η οποία υπερβαίνει τις απαιτήσεις ADA, συμμορφώνεται με τα πρότυπα ADA, ANSI, astm, CSA Οι αγκυρώσεις ασφαλούς στήριξης συνιστώνται για χρήση σε εφαρμογές χωρίς καρφιά (κοίλου τοίχου) οι άγκυρες που πωλούνται χωριστά. Η μπάρα στήριξης Moen SecureMount Stainless 30 ιντσών προσφέρει μια ελαφρώς βουρτσισμένη ζεστή γκρι μεταλλική εμφάνιση. Είναι συμβατό με την ADA και συνοδεύεται από περιορισμένη εγγύηση διάρκειας ζωής. Ένα γνήσιο προϊόν Moen. Η Moen είναι αφοσιωμένη στο σχεδιασμό και την παράδοση όμορφων προϊόντων που διαρκούν μια ζωή. Η Moen προσφέρει μια μεγάλη ποικιλία από βρύσες κουζίνας, νεροχύτες κουζίνας, βρύσες και αξεσουάρ μπάνιου και προϊόντα ντους. Τα προϊόντα Moen συνδυάζουν στυλ και λειτουργικότητα με ανθεκτικότητα για μια ζωή ικανοποίησης των πελατών. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Η μπάρα στήριξης Moen SecureMount Stainless 30 ιντσών προσφέρει μια ελαφρώς βουρτσισμένη ζεστή γκρι μεταλλική εμφάνιση. Είναι συμβατό με την ADA και συνοδεύεται από περιορισμένη εγγύηση διάρκειας ζωής. Ένα γνήσιο προϊόν Moen. Η Moen είναι αφοσιωμένη στο σχεδιασμό και την παράδοση όμορφων προϊόντων που διαρκούν μια ζωή. Η Moen προσφέρει μια μεγάλη ποικιλία από βρύσες κουζίνας, νεροχύτες κουζίνας, βρύσες και αξεσουάρ μπάνιου και προϊόντα ντους. Τα προϊόντα Moen συνδυάζουν στυλ και λειτουργικότητα με ανθεκτικότητα για μια ζωή ικανοποίησης των πελατών.

Συμβατό με την ADA. Δοκιμασμένο στα 500 λίβρες. Τραβήξτε. Περιορισμένη εγγύηση διάρκειας ζωής. Κρυφή βίδα. Το ανοξείδωτο φινίρισμα προσφέρει μια ελαφρώς βουρτσισμένη ζεστή γκρι μεταλλική εμφάνιση. Κρυφή βίδα. Το ανοξείδωτο φινίρισμα προσφέρει μια ελαφρώς βουρτσισμένη ζεστή γκρι μεταλλική εμφάνιση. ΚΑΤΑΣΚΕΥΑΣΜΕΝΟ ΓΙΑ ΔΙΑΡΚΕΙΑ: Υποστηρίζεται από την Περιορισμένη Εγγύηση της Moen. ΕΙΡΗΝΗ: Σχεδιασμένο για εγκατάσταση χωρίς προβλήματα. ΚΑΤΑΣΚΕΥΑΣΤΗΣ ORIGINAL EQUIPMENT: Αυθεντικό ανταλλακτικό Moen. ΑΝΤΑΛΛΑΚΤΙΚΟ ΕΞΑΡΤΗΜΑ: Ιδανικό για επισκευή προβληματικών υδραυλικών ειδών χωρίς την ανάγκη αντικατάστασής τους. ΣΧΕΔΙΑΣΜΟΣ ΠΟΛΥΠΛΕΟΝ: Το φινίρισμα χρωμίου είναι ιδιαίτερα ανακλαστικό για μια εμφάνιση που μοιάζει με καθρέφτη που ταιριάζει με κάθε στυλ διακόσμησης.
Assembled Diameter ‎1.25 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Moen
Brand ‎Moen
Color Stainless
Color ‎Stainless
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 311 ratings 4.7 out of 5 stars
Cutting Diameter ‎1.25 Inches
Finish ‎Stainless
Finish Type ‎Stainless
Included Components ‎Mounting Hardware, Installation Instructions, Grab Bar
Installation Method ‎Wall Mounted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 33.25 x 3 x 42 inches
Item Dimensions LxWxH ‎33.25 x 3 x 42 inches
Item model number ‎8730
Item Package Quantity ‎1
Item Weight 0.01 Ounces
Item Weight ‎0.01 Ounces
Manufacturer ‎Moen Incorporated
Material Stainless Steel
Material ‎Stainless Steel
Part Number ‎8730
Pattern ‎Grab Bar, 32 in
Product Dimensions ‎33.25 x 3 x 42 inches
Size ‎30 Inch
Special Features ‎311111Casters
Style ‎Transitional
Warranty Description ‎Limited Lifetime Warranty

3.8

11 Review
5 Star
80
4 Star
14
3 Star
3
2 Star
2
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Susan
Easy to install!
Great quality and easy to install!!
Scritto da: Trudy Vander
30" grab bar
Excellent ????
Scritto da: Jay McMillen
Works as intended; looks good. That sums it up.
Easy to install. Fits perfectly. Looks good. What more is there?
Scritto da: Yafi
Don't use included screws!!!
Well I was assuming this was a great brand. The quality of the grab bar is good. I live in the 60-year-old lathe and plaster house. I finally located a stud and wouldn't you know it, the damn head of the screw broke in the stud even after pre-drilling. Changing the position was not a choice I wanted to make. I already had three large holes for heavy duty anchors in the other side of the grab bar. I should have known better than to use the included screws. Please do not use the anchors that are included. They are not adequate for hanging a grab bar, maybe a picture frame. The included screws look hefty enough but it's no good if the head easily breaks off. You have been warned.
Scritto da: Theresa J.
Ordered wrong size; had bought one for other bath--perfect!
We measured wrong, and it was too big. We were very busy with the new bathtub surround that we didn't return it in time. Upset about the short return period because it wasn't cheap. Still in bag/box.
Scritto da: David S. Heller
A big help
My wife has limited mobility and needs assistance in getting in and out of her wheelchair. This grab bar was easily installed in the bathroom, replacing the towel bar that was there initially. It is VERY secure and it gives her a great deal of confidence in transferring from her chair. I would definitely recommend this product
Scritto da: Keith G. Hammerbeck
Go get proper screws at the hardware store.
Like others, I found great quality and design EXCEPT for the included mounting screws. The phillips slot is way too shallow and strips out, even when specified pilot holes have been drilled and soap applied to the threads.
Scritto da: April
Great quality
I installed this in my grandmother’s bathroom so that she had some stability. She is very happy with it.
Scritto da: Pork Chop
Top quality, ease of installation, durable, as with all MOEN products
I am an unconditional fan of MOEN products, having 8 or more of their products (towel holder, toilet paper, shower head, hook, faucet, etc) and added this support. Result is simply outstanding. Not complicated. Got the Zircon StudSensor 70 to find the wood beam on wall near bathtub, with a pencil. Make off 3 holes at top and bottom. Also needs 3 foot long level, for vertical perfection. Needs a power drill. Needs PicQuic Sixpac screwdriver. Since the Philips screws are industry-cheap, and a lot of torque needed on #10 screws in the beams, despite a 3/32 full depth pilot hole ( 2 inches), I strongly recommend stainless steel 2 inch screws, that will not wear out in the process of installation. The Robertson (square head) #10 screw is perfect, keeping in mind that humidity is normal in a watercloset. There is no need for a Tip Holder or Drive Guide or drill bit screwing those in, as can be done easily by hand, and won't strip the head, as going slowly is preferable. Perhaps a washer under the screw head is advisable, since the holes on the support are very large, almost as large than the actual screws, risking the screw simply not holding the suport from the head being too small. A washer around the screw perhaps i the strongly recommended for longevity.
Scritto da: J. Mathie
Moen is great quality!!
Used for a solid grab bar on the back wall of a new tiled shower. Drilling the holes through the tiles was the tough part - but this bar is rock solid. Price was far better than at the Home Depot nearby.
Scritto da: kyu wan shon
good
good

Σχετικά προϊόντα

hot

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array