Makita FS2701 2.500 RPM Ρυθμιζόμενο Κατσαβίδι Ροπής

Brand:Makita

2.2/5

Ft
460.05

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Εργαλεία υψηλής ποιότητας σε τιμές αξίας - οδηγούν στην αγορά διασφαλίζοντας ότι τα προϊόντα είναι ανθεκτικά, αξιόπιστα και σε λογικές τιμές. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Τα νέα Κατσαβίδια της Makita είναι τα πιο συμπαγή και ελαφριά στην αγορά. Η αυξημένη εργονομία σε συνδυασμό με πολλά μοναδικά χαρακτηριστικά τα καθιστούν τα καλύτερα σκαλοπάτια για τον επαγγελματία τελικό χρήστη. Με βάση εκτεταμένη έρευνα αγοράς, έχουμε επικεντρωθεί στις τρεις βασικές ανάγκες του τελικού χρήστη. Αίσθηση (βάρος, μέγεθος, εργονομία), Απόδοση (χαρακτηριστικά όπως ρύθμιση βάθους κώνου μύτης και φως LED) & Ανθεκτικότητα (πόσο χρόνο θα αντέξει το εργαλείο σε όλη τη διάρκεια της εργασίας, χρόνος =$$$).

Εργονομικά σχεδιασμένη λαστιχένια λαβή πιστολιού για αυξημένη άνεση. Μεγάλη σκανδάλη με κουμπί κλειδώματος που βρίσκεται στη μέση της λαβής για ευκολία του χειριστή. Το ενσωματωμένο φως LED φωτίζει την περιοχή εργασίας για μεγαλύτερη παραγωγικότητα σε εφαρμογές χαμηλού φωτισμού. Η προσαρμογή του συμπλέκτη ροπής στρέψης έξι σταδίων βοηθά στην αποφυγή υπερβολικής κίνησης του συνδετήρα και υλικών ζημιών. Ισχυρός κινητήρας 6,0 AMP με 0-2.500 σ.α.λ. με αυξημένη ροπή για πλευρικό τύλιγμα, μεταλλικό δάπεδο και εφαρμογές βαρέως μετρητή.
Batteries Required? ‎No
Color ‎Teal
Country of Origin ‎China
Customer Reviews 3.2 3.2 out of 5 stars 7 ratings 3.2 out of 5 stars
Included Components ‎Makita - Screwdriver 6A 6Stg Adj Torque Settings 0-2500 Rpm
Item model number ‎FS2701
Item Package Quantity ‎1
Item Weight ‎4 pounds
Manufacturer ‎Makita
Material ‎metal
Maximum Power ‎350 Watts
Part Number ‎FS2701
Power Source ‎Hand Powered
Product Dimensions ‎11.12 x 2.75 x 8.15 inches
Size ‎One Size
Speed ‎2500 RPM
Voltage ‎120 Volts

2.2

3 Review
5 Star
24
4 Star
11
3 Star
44
2 Star
0
1 Star
21

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: A. Diehl
A couple things I don’t like so much is the clutch takes awhile to break-in
These are tuff little gun’s. I use them for commercial roofing so I put them to the ultimate test for strength and endurance. I’ve always have used DeWalt screw guns in the past, because they were the only ones (easily available) with the quick-release on it. The Makita feels and sounds higher quality. A couple things I don’t like so much is the clutch takes awhile to break-in, and the nose piece has a tendency to loosen up and fall off. Which can result in clutch spring loss. That happened to me and I had to order new springs. It wouldn’t have been so bad but I couldn’t use the gun and it took two weeks to get the parts. I hope Makita keeps improving on these because I really like the tool.
Scritto da: Red Stick
Does the job
Makita products are always pretty good. Needed this to do one patio roof job and find myself using it often for other heavy-duty screw jobs. I use cordless drivers a lot and am glad to have this one for the extra power for driving a lot of screws. It is a well-made, capable tool.
Scritto da: lamp_shade
TERRIBLE SCREWGUN
This gun falls apart at the tip where the clutch is located. It breaks off after a months use. We use it here in light gauge steel frame production and it has been the worst screwgun ever...There have been 8 of these we've gone through which all broke the same exact way. We've used DeWalt DW268's for over 10years here at our company and they out perform the Makita FS2701 10-Fold...DO NOT BUY THIS GUN.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array