Γάντια εργασίας MAGID Ανθεκτικά στη θερμότητα και την πρόσφυση επιπέδου A5, 1 PR, με επίστρωση σιλικόνης (RepTek Grip), Μέγεθος 7/S, Κατασκευή παραθύρων, Εργασίες στεγανοποιητικού, Χειρισμός γυαλιού, κέλυφος Hyperon (GPD487) 7/S 1 ζευγάρι

Brand:MAGID

3.3/5

Ft
47.74

Ιδανικά για κάθε βιομηχανία που περιλαμβάνει εργασίες θερμής τήξης και στεγανοποίησης, αυτά τα γάντια εργασίας MAGID D-ROC GPD487 ανθεκτικά στην κοπή διαθέτουν επίστρωση παλάμης σιλικόνης RepTek Grip για αυξημένη αντοχή στη θερμότητα και ανώτερο κράτημα σε στεγνό. Τα γάντια με επίστρωση σιλικόνης παρέχουν επίσης ισχυρή αντίσταση πρόσφυσης για να αποτρέψουν τη συσσώρευση σφραγιστικού και θερμού τήγματος. Δροσερό και ελαφρύ για ολοήμερη άνεση σε οποιοδήποτε περιβάλλον εργασίας, το κέλυφος Hyperon συμβάλλει στην αύξηση της συμμόρφωσης με την ασφάλεια, ενώ προσφέρει εξαιρετική αντοχή στην κοπή A5 και αντοχή στην τριβή επιπέδου 6. Διαθέτουν ένα γραφικό ασπίδας που είναι χρωματικά κωδικοποιημένο από το επίπεδο κοπής για εύκολη αναγνώριση συμμόρφωσης και η χρωματικά κωδικοποιημένη συννεφιά στα ανθεκτικά στη διάτρηση γάντια λειτουργεί ως οπτικό βοήθημα για το μέγεθος και βοηθά στην αποφυγή ξεφτίσματος. Επίπεδο κοπής ANSI 2016: A5 Επίπεδο τριβής ANSI: 6 Επίπεδο διάτρησης ANSI: 3 Επικάλυψη: Ανθεκτικό στη φλόγα σιλικόνης: Χωρίς μετρητή: 13 Επιλογές λαβής: παλτό χέρι: Ζεύγος Προστασία από κρούσεις: Δεν πλένεται: Ναι Υλικό: Hyperon Βάρος υλικού: ελαφρύ Palm : Χωρίς αναστρέψιμο: Χωρίς κέλυφος Χρώμα: Αλάτι & πιπέρι Μέγεθος: 7 Αποστειρωμένο: Όχι Με ετικέτα: Χωρίς αντίχειρα Καβάλος: Χωρίς οθόνη αφής: Όχι Τύπος: Ειδικά για το χέρι

ΠΡΟΣΟΧΗ: Αυτό το προϊόν είναι ανθεκτικό σε κόψιμο και τρύπημα, δεν είναι ανθεκτικό σε κόψιμο και τρύπημα. Πλένεται στο πλυντήριο: στεγνώνει σε χαμηλή θερμοκρασία. Μην χρησιμοποιείτε χλωρίνη. μην στεγνώνετε σε άμεσο ηλιακό φως. Κατάλληλο για χρήση στο σπίτι ως γάντια κοπής ή γάντια κουζίνας ανθεκτικά στην κοπή. Αντίσταση κοπής ANSI επιπέδου A5, αντίσταση τριβής ANSI επιπέδου 6, αντίσταση διάτρησης ANSI επιπέδου 3. Η χρωματική συννεφιά λειτουργεί ως οπτικό βοήθημα για το μέγεθος και μειώνει το ξέφτισμα. Η επίστρωση σιλικόνης παρέχει αντοχή στην πρόσφυση για να αποτρέψει τη συσσώρευση στεγανοποιητικού και θερμού τήγματος. Επικάλυψη παλάμης σιλικόνης RepTek Grip για αυξημένη θερμική προστασία και εξαιρετική πρόσφυση στο στεγνό. Το ελαφρύ κέλυφος Hyperon 13-gauge είναι δροσερό για άνεση που διαρκεί και προστασία από την κοπή.
Brand MAGID
Country of Origin China
Department unisex-adult
Manufacturer MAGID
Material Silicone
Package Dimensions 9.65 x 6.97 x 2.13 inches; 2.47 Ounces
Reusability Reusable
Size 7/S
Unit Count 1.0 Count

3.3

8 Review
5 Star
50
4 Star
27
3 Star
23
2 Star
0
1 Star
0

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: neal
Seem sturdy enough
I've been playing wannabe arborist with these gloves for a few days after tearing through my last two sets of name brand automotive work gloves in 2-3 recreational climbs. They fit pretty well and provide decent dexterity. I am able to operate carabiners and snaps with ease. The only visible wear so far has been the decals on the backs of the hands, but who cares? The only reason its not 5 stars is that I can get a comparable glove for 1/3 of the price, which I ordered at the same time as these. I ordered these since they would ship quicker than the other pair. I plan to fully test the others to the same extent. The winner will be the new go-to glove for what I'm doing. Update: These gloves lasted a month, but my climbs have gotten more arborist and less recreational. The underlying glove is still fine but the coating wore off to the point they were requiring more effort for grip. They are still usable for typical yard work and the cut resistance remains intact. For reference: 1 star - Typical mechanix brand or similar: 2-3 days before my skin became visible through holes in finger tips 4 stars - This item: about a month before coating wore to the point that it grip was compromised. 3 stars - Another glove of this brand: "MAGID D-ROC Lightweight Hyperon NitriX Grip Technology Palm Coated Work Gloves - Cut Level A7" about 2 weeks before the coating was gone. Still usable for normal yard work stuff though.
Scritto da: Amazon Customer
Quality
This is the third time I have ordered these gloves The first two were very good. These are exactly the same pecs but much smaller and very tight to wear. The vendor has cheapened this product.
Scritto da: Julie Ann Dawson
Safety and comfort
Gloves fit comfortably. The provide good grip and protection for mundane work. I take these to the office to use when I need to do some light work in the back warehouse area, such as moving a pallet into position, moving metal items, or cutting with a safety knife. I've only had them for a few weeks but so far the silicone coating on the palms has remained in place. I was a little concerned it might wear or peel off over time, but this has not happened.
Scritto da: csroc
Flexible and grippy
These are great gloves for anytime you need some extra grip. The cut protection is also welcome and gives these added purpose. They do run a bit more snug than other other Magid gloves of the same size, but I don't find them uncomfortable.
Scritto da: Jong Lee
medium weight and works well with good styling
I find the gloves a bit too stiff due to the silicone palm. Like the styling and fits as expected.
Scritto da: buddha-dog
Sturdy, well made, generous silicone coating, true-to-size
These are nicely made gloves, the material is very robust and the small amount of sewing required by this knit-mostly-as-one-piece design is excellent. The silicone coating is good and thick, especially good for working around sticky substances and seems to give a confident grip on just about everything. Cut-level certification is very welcome as I frequently work around sharp edge tools and materials with burrs. The printing on the back of the gloves is clear and handsomely designed. Not sure why I care about that but I don't know, makes me feel confident my hands are protected when I'm wearing them. I usually take a Men's L glove and this Large size fits very well, with the exception that the gusset between the pinky and ring finger doesn't reach quite down to the web between those fingers, maybe 3/8" short. That could be for manufacturing purposes as I see those gussets line up in a straight line. Or maybe I'm a hand mutant :) In any case, it's not something I even notice once I get focused on my work instead of inspecting the glove. Overall, really top quality gloves I know I'll get a lot of use out of. If this review helped you, please take a second to click the "Helpful" button.
Scritto da: M. L Lamendola
Comfortable hand protection
This is my second pair of D-ROC gloves. The first pair, which has held up remarkably to a lot of abuse, is a different model. Though a little tight for a Large, these are nonetheless comfortable. I decided to test the dry grip claim, so I wore these while handling power tools, hand tools, large parts, and small parts; the grip felt superior to what I am used to while wearing work gloves. I was even able to reload a string trimmer spool with these on. I don't work with hot sealants, but sometimes I pick up a tool or ladder that has gotten hot from being in the sun. The extra heat-resistance of these gloves would really help in those instances. My other D-ROC gloves are rated A7, which means they withstand about twice the cutting load that these A5s do. That said, I believe the mid-level cut resistance of the A5 is adequate for most situations a tradesman or DIY is likely to encounter. The lower the A number, the higher the dexterity. So it's a trade-off. For heavy construction or other situations where the risk of cuts is high, you should probably step up to an A7.
Scritto da: Richard C. Drew
Super Grippy, decently flexible, snug fit.
These fit like a glove should - snug all around, but not uncomfortable. The clear silicone coating on the glove bottom is super-grippy and goes from the wrist to fingertips and wraps around the fingertips and part of the sizes. It DOES affect dexterity and sense of touch a little, but you can easily grip a wet hammer handle. These are also a bit thicker than typical disposable work gloves, but that makes sense with the extra protection. Cut protection level 5 is the first level to protect against utility blades.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array