Lenox 1972924 METALMAX 7 ίντσες x 7/8 ίντσες. Τροχός κοπής με διαμάντια

Brand:Lenox

3.7/5

Ft
63.62

Το Lenox MetalMax είναι το νέο πρότυπο για λειαντικά κοπής μετάλλων. Η πρωτοποριακή τεχνολογία διαμαντιών προσφέρει 1.000 ή περισσότερες κοπές (30 φορές μεγαλύτερη διάρκεια ζωής από τους λεπτούς συγκολλημένους τροχούς κοπής)* χωρίς να θυσιάζει την ταχύτητα ή το φινίρισμα. Κατασκευασμένο από συμπαγές χάλυβα για να μειώσει σημαντικά τον κίνδυνο θραύσης, ο συνδυασμός ενός ατσαλιού σώματος με μια ακμή διαμαντιού επιτρέπει στο MetalMax να διατηρεί την αρχική του διάμετρο τροχού μέχρι την τελευταία κοπή, πράγμα που σημαίνει καλύτερο έλεγχο, εμβέλεια και ακρίβεια κοπής καθ 'όλη τη διάρκεια ζωής του τροχού. Ο βελτιωμένος σχεδιασμός μειώνει σημαντικά τα σωματίδια σκόνης και μειώνει την οσμή. Το Lenox MetalMax είναι κατάλληλο για εφαρμογές κοπής μετάλλων, όπως χάλυβα, λαμαρίνα, ανοξείδωτο χάλυβα, ράβδο οπλισμού, χυτοσίδηρο, αλουμίνιο και μη σιδηρούχα μέταλλα και λειτουργεί με τις ίδιες ταχύτητες και τροφοδοτεί με λεπτούς συγκολλημένους λειαντικούς τροχούς.

Δεν υπάρχουν διαθέσιμες μονάδες
Δεν φθείρεται όπως τα κολλημένα λειαντικά μειώνοντας τα σωματίδια σκόνης για μια καθαρότερη θέση εργασίας. Διατηρεί την αρχική διάμετρο του τροχού καθ' όλη τη διάρκεια ζωής της λεπίδας για καλύτερο έλεγχο, εμβέλεια και ακρίβεια. Το συμπαγές σώμα τροχού από χάλυβα μειώνει σημαντικά τον κίνδυνο θραύσης για πρόσθετη ασφάλεια, αυξημένη παραγωγικότητα, μειωμένο χρόνο διακοπής λειτουργίας και χαμηλότερο κόστος ανά κοπή σε σύγκριση με τους τροχούς κοπής με λεπτές συγκολλήσεις. Η προηγμένη τεχνολογία διαμαντιών παρέχει 30 φορές μεγαλύτερη διάρκεια ζωής από τους τροχούς κοπής με λεπτές συγκολλήσεις σε εφαρμογές κοπής μετάλλων* *Μέση απόδοση σε τετράγωνο σωλήνα από ανθρακούχο χάλυβα 1” έναντι λεπτών συγκολλημένων λειαντικών τροχών αποκοπής. Παρέχει 1.000 ή περισσότερες κοπές χωρίς αλλαγή τροχού.
Assembled Diameter 7 Inches
Assembled Diameter ‎7 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Lenox
Brand ‎Lenox
Construction Type ‎Cut-off Wheels
Country of Origin ‎Korea, Republic of
Customer Reviews 4.6 4.6 out of 5 stars 81 ratings 4.6 out of 5 stars
Cutting Diameter ‎7 Inches
Grit Material Diamond
Grit Material ‎Diamond
Grit Number ‎60
Grit Type Fine
Grit Type ‎Fine
Included Components ‎Abrasive Cutoff Wheel
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 7.2 x 7.1 x 0.2 inches
Item Dimensions LxWxH ‎7.2 x 7.1 x 0.2 inches
Item model number ‎1972924
Item Package Quantity ‎1
Item Weight ‎11.2 ounces
Manufacturer ‎Lenox
Material ‎Metal
Measurement System ‎Metric
Part Number ‎1972924
Product Dimensions ‎7"L x 7"W
Product Dimensions ‎7.2 x 7.1 x 0.2 inches
Size ‎Pack of 1
Warranty Description ‎Limited lifetime

3.7

8 Review
5 Star
78
4 Star
15
3 Star
3
2 Star
0
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Jbt
Has its benefits
Good disk for cutting, just understand you're trading some speed for not having to constantly replace normal abrasive discs. Also since it's a metal blade, may be a little more noise but using a grinder isn't a quiet operation to start with so not a big deal.
Scritto da: JV
Easy cut thru thick materials, long lasting blade, good price!.
Yes, this blade lasts long, long time!.
Scritto da: DSWKAT
Good blade
Cut 15 pieces of 3 foot wide metal roofing so far and it was 100X better than the Diablo blade that embedded metal chunks into my arm (in all fairness, that was my fault because I wasn't using safety gear, that blade cut fine as well). I'm not a professional and only use this blade for small projects at home. There was some sparking while it was cutting, but no chunks flying.
Scritto da: D Brosan
As a Hobbyist ...
As a hobbyist in fabrication I've used all manner of metal cutting tools. An angle grinder gives me the freedom to move around large pieces and for me it's my go-to weapon! Typically I use 4 1/2 abrasive cut discs, but wanted to upgrade to something 30 times more expensive, that was supposed to make ripping 1/4 plate (my Plasma cutter is down) easy, "like butter" as another reviewer put it. Wrong! I used my 7 inch 13amp Hitachi grinder, a brand new one I just bought for the occasion, and it did a very mediocre job. I actually found myself picking up one of the ten 4 1/2 inch grinders I had around to finish the job, AND HAD AN EASIER TIME ABOUT IT! The blade was slightly jumpy but nothing out of the ordinary, it just didn't cut that great. Clearly my expectations were too high, having read some other reviews. I know, I know don't blame the tool blame the user..... But I'm just giving my impressions as "weekend warrior" you can take my advice and buy abrasive discs at 1/30th the price or this. For me you know what I'm doing. I am well within the window to return this item, but I can't stand people that use stuff and then return it. Ill try again tomorrow, maybe it "my technique.... lol
Scritto da: Twain
Works great paired with my Makita grinder.
Works great paired with my Makita grinder. Have used these on a 3000 sq ft commercial demo, all conduit and many hundreds of feet at that. Great fun lots of sparks (have a fire extinguisher at hand). Also great for cutting back plaster with embedded metal lathe, bricks ...more
Scritto da: Svk788
Awesome
Awesome blade!! Cuts metal like butter
Scritto da: Amazon Customer
Worth the extra money
Works perfect. Lasts much longer than many others.
Scritto da: Wayne
Works great
It worked good enough that I have ordered more.

Σχετικά προϊόντα

hot
4.1/5

Ft 134.05

4.1/5

Ft 134.05

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array