Κράνος συγκόλλησης Jackson Safety, ελαφρύ, ανθεκτικό, εύκαμπτο, σταθερής απόχρωσης W10 HLX Protective Welder μάσκα προσώπου με μαύρο κέλυφος για άνδρες και γυναίκες, Heavy Metal Graphic, 20508

Brand:Jackson Safety

3.6/5

Ft
140.48

Όταν χρειάζεστε ένα βασικό κράνος συγκόλλησης για την προστασία των ματιών και του κεφαλιού σας, αλλά δεν θέλετε να θέσετε σε κίνδυνο την άνεσή σας, το Jackson Safety Fixed Shade Welding κράνος (W10 HLX) είναι η καλύτερη επιλογή σας. Έχει ένα εξαιρετικά ελαφρύ κέλυφος που ζυγίζει μόλις 6 ουγγιές, επομένως μπορεί να βοηθήσει στη μείωση της έντασης του λαιμού. Κατασκευασμένο από Hydraflex, το κέλυφος παρέχει την απόλυτη ευελιξία και ανθεκτικότητα, ενώ προσαρμόζεται ακόμη και στο καπέλο χρησιμοποιώντας 187-S (κωδικός ασφαλείας Jackson 15968). Μιλώντας για προσαρμόσιμο, είναι επίσης συμβατός με αυτόματο τροφοδότη εγγράφων (ADF) χρησιμοποιώντας τα φίλτρα αυτόματης σκουρότητας NexGen, TrueSight II, Professional Variable και Insight της Jackson Safety. Πληροί τα πρότυπα ANSI Z87.1- και είναι συμβατό με το CSA Z94.3, ώστε να αισθάνεστε σίγουροι επιλέγοντάς το για να σας προστατεύει ενώ συγκολλάτε. Είναι τόσο ελαφρύ και άνετο, που δεν θα σας πειράζει να το φοράτε για μεγάλες χρονικές περιόδους. Το Jackson Safety W10 HLX διατίθεται σε διάφορα γραφικά, συμπεριλαμβανομένου αυτού, του Heavy Metal. Είναι μια έξυπνη κουκούλα συγκόλλησης για φοιτητές, χομπίστες συγκόλλησης, επαγγελματίες και επιθεωρητές για να λάβουν την προστασία που χρειάζονται για να παραμείνουν ασφαλείς. Ιδρύθηκε το 1933, η Jackson Safety έχει δημιουργήσει έναν αιώνα φήμη για την παροχή των πιο καινοτόμων λύσεων ασφάλειας στις βιομηχανίες συγκόλλησης και εξοπλισμού ατομικής προστασίας. Όσον αφορά την παροχή λύσεων ασφαλείας με μακροχρόνια αξία, ανθεκτικότητα και άνεση, η Jackson Safety έχει θέσει το πρότυπο. Είτε απαιτείται προστασία συγκόλλησης σε περιβάλλον κατασκευής χάλυβα, προστασία κεφαλής σε εργοτάξιο ή προστασία ακοής σε αεροδρόμιο, η Jackson Safety παρέχει το ευρύτερο φάσμα επιλογών ασφαλείας για να καλύψει τις ανάγκες κάθε εργασίας και κάθε εργάτη.

Δεν υπάρχουν διαθέσιμες μονάδες
ΠΙΣΤΟΠΟΙΗΣΕΙΣ ΑΣΦΑΛΕΙΑΣ – Αυτό το κράνος παρέχει προστασία στο πρόσωπο και τα μάτια του χρήστη κατά τη συγκόλληση. είναι αποτελεσματικό και οικονομικό, πληροί τα πρότυπα ANSI Z87.1 και είναι συμβατό με το CSA Z94.3. ΕΞΥΠΝΗ ΠΡΟΣΤΑΣΙΑ: Αυτό το μοντέλο διατίθεται σε ποικιλία γραφικών και διαθέτει το premium σύστημα κεφαλής 370 Speed ​​Dial για εύκολο κράτημα/στροφή. Κατασκευάζει μια έξυπνη κουκούλα συγκόλλησης για φοιτητές, χομπίστες και επαγγελματίες. ΠΕΡΙΛΑΜΒΑΝΟΝΤΑΙ ΣΤΟΙΧΕΙΑ: Το κράνος παθητικής συγκόλλησης Jackson Safety W10 HLX συνοδεύεται από κάλυμμα και φίλτρο πολυανθρακικού απόχρωσης 10. ΠΡΟΣΑΡΜΟΖΟΜΕΝΟ: Προσαρμόζεται με σκληρό καπέλο με χρήση 187-S και ADF προσαρμόσιμος χρησιμοποιώντας τα φίλτρα αυτόματης σκουρότητας NexGen, TrueSight II, Professional Variable και Insight της Jackson Safety. ΑΝΘΕΚΤΙΚΟΣ ΣΧΕΔΙΑΣΜΟΣ: Αυτό το κράνος συγκόλλησης ασφαλείας Jackson διαθέτει ανθεκτικό, ελαφρύ σχέδιο που ζυγίζει μόνο 6 ουγγιές για να μειώσει την ένταση του λαιμού. Το κέλυφος Hydraflex παρέχει την απόλυτη ευελιξία.
Brand Jackson Safety
Color Black
Country of Origin China
Is Discontinued By Manufacturer No
Item model number 20508
Item Weight 0.01 Ounces
Manufacturer SureWerx
Material Metal
Product Dimensions 865 x 10.9 x 15.5 inches; 0.01 Ounces
Style Modern

3.6

11 Review
5 Star
77
4 Star
11
3 Star
3
2 Star
4
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Paige Ray
Comfy.
The fit and finish of this helmet is great. I just wish Jackson included a better lens. It's not bad, its just basic and not awesome for TIG. Helmet got dinged 1 star because the cost has gone up significantly over the past 3 years.
Scritto da: Konrad976
Great basic hood.
Love the headgear.
Scritto da: Ryan
Light, comfortable
This has became my favorite welding hood. I woke 10 hour shifts and it’s durable, comfortable, and clear.
Scritto da: TerryP
Works, with some adjustments
I've welded before, but it's been several years, so I'm having to get new equipment. Some of the new gear is very cool, so I decided to step up into the new world. Probably should have done some more research before making that step. The first thing I purchased was a plasma cutter/mma/TIG welder, followed by a nice True Sight II. Didn't realize that the Truesight II was an insert, not a helmet. My research showed me that the insert fit in a Jackson helmet. Getting a Jackson helmet was necessary because I'd purchased a Jackson Truesight II insert which I thought was compatible with any helmet. Not true. Anyway, I bought this helmet to accommodate the Truesight II. The good: After a bit of fumbling around, the helmet did accommodate the Truesight II, which is important, and a major consideration. The not so good: When I received the helmet, it tipped up enough to clear my chin, but not enough to see the work on the table. I had to reconfigure the headgear mounts to allow the helmet to move. Don't know if I get the mounts back in correctly, but at least I can raise and lower the helmet to weld and handle my work pieces. Bottom line, not bad, but annoying to have to reconfigure right out of the bos.
Scritto da: Tyler Edwards
Love the hood!
Very comfortable for clocking a lot of hood time, never gets heavy. I do wish it didn't feel so flimsy however I know that would add weight. You take to good with the bad I guess.
Scritto da: Hordur Arnarson
Great helmet for the money.
I got sick and tired of my auto-darkening big brand name helmet flashing my eyes while doing low amperage Tig welding. Got this bad boy with some quality gold coated glass and it works great. Much lighter than my auto darkening helmet and the ratcheting mechanism gives good action when you flip the hood down before striking the arc. The only thing I'm changing is that the shade 10 glass is a smidgeon dark for my taste during the sub 100-amp Tig welding (I'm working on 14 ga. stainless steel exhaust tubing) so I just got a shade 9 and an 8 to see what fits best. But the hood is solid!
Scritto da: R. L. Williams
Decent welding hood
I purchased this hood for welding at home, and for the most part it's exactly what I expected. Unfortunately the plastic snaps for the crown adjustment don't stay put, and I had to tape that band so it wouldn't unsnap when raising or lowering the hood. I also replaced the plastic shade 10 lens with a glass shade 9, but I knew I would do that going in. Overall, I like the hood.
Scritto da: TigerDaddy
Amazing...
I had no idea that this helmet was charcoal grey metallic. This dude looks awesome. The head strap is what you're really paying for and it is the best you can get. Together I was taken back. What I got and what I payed for has got me scratching my head. The full face glass is so much better than that auto darkening crap I bought 5 years ago. Amazing....
Scritto da: Amazon Customer
Was only shipped one hood.
Gold lens is absolutely awesome. Jackson headmount is damn comfy and hood is lightweight. 3 stars given because the ad states there are two in the case. Was only shipped a single hood. Will edit ad to 5 stars if this is corrected.
Scritto da: Mario Garcia
Producto original
The media could not be loaded. Exelente producto un poco tardado el envio pero todo muy bien
Scritto da: stephane
Horrible
Colis en retard aucun detail a jour suite a letiquette créé, vendeur pas fiable

Σχετικά προϊόντα

hot
0.1/5

Ft 1236.10

0.1/5

Ft 1236.10

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array