KOHLER T25740-4-BN HINT Επένδυση βρύσης μπάνιου με δύο λαβές κατάστρωμα, ζωηρό βουρτσισμένο νικέλιο με δύο λαβές ζωηρό βουρτσισμένο νικέλιο

Name: KOHLER T25740-4-BN HINT Επένδυση βρύσης μπάνιου με δύο λαβές κατάστρωμα, ζωηρό βουρτσισμένο νικέλιο με δύο λαβές ζωηρό βουρτσισμένο νικέλιο
Brand: Kohler
SKU: 0885612963239
Price: 616.21 HUF
Availability: InStock

Brand:Kohler

3.1/5

Ft
616.21

Μόνο περικοπή. απαιτεί βαλβίδα για να ολοκληρωθεί η εγκατάσταση (πωλείται χωριστά). Κατάστρωμα βάσης. Τριών τρύπας. Τα φινιρίσματα KOHLER αντιστέκονται στη διάβρωση και την αμαύρωση. Premium μεταλλική κατασκευή για ανθεκτικότητα και αξιοπιστία. Συντονίζει άλλα προϊόντα της συλλογής Hint. Μέγιστη ταχύτητα ροής 10,0 gpm (3,8 lpm) στα 45 psi (3,1 bar). 7-7/16 ίντσες (189 χλστ.) πρόσβαση στο στόμιο. Δύο λαβές μοχλού προσφέρουν ξεχωριστό έλεγχο ζεστού και κρύου νερού.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0885612963239

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εξαρτήματα κουζίνας & μπάνιου, Συσκευές μπάνιου, Βρύσες & κεφαλές ντους μπάνιου, Βανιέρες μπανιέρας,

Brand	Kohler
Color	Vibrant Brushed Nickel
Finish Type	Brushed
Handle Type	Lever
Included Components	Deck-Mount Bath Faucet Trim
Installation Method	Centerset
Material	Brass
Mounting Type	Deck Mount
Number of Handles	2
Style	Two-Handle

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Bongu

Beautiful Hardaware and install. ***Not for an average DIY person***

First, the item I received was NOT new. The original seal was broken and shipping tape closed the box. I am not very happy about that. The parts all seemed to be in the box, but the instructions were super basic. I have a lot of experience replacing plumbing fixtures, so I was able to get this installed by myself. I cussed and cursed due to the ridiculously tight tolerance of the valve assembly pipes and the under deck clamp. The design of the under deck clamp was also ridiculous. The studs were 3.5 inches long, and the fasteners that went over the studs were over 2 inches long. The part that really set me off was the fact there was no connection provided to go from the mixed output to the diverter assembly. I had to create this myself. This is due to one of two things:. It could have been a casualty of being an open box and the parts were missing, or it could have been like this from the factory with this connection left up to the installer to figure out. Either way, unacceptable. The installation required soldering and using special adapters because the hot and cold supply lines are 1/2 inch OD instead of 1/2 inch ID. The fittings are way different and I had to go to a specialist store to get the right ones. I will say the final installation looks great, and it scored a 100 with the WAF. I would only recommend this product if you are mechanically inclined and have top notch soldering skills.

Scritto da: Pamela Jordan

difficult to install. I hired a plumber and it was difficult..

Product was used in private home in the owner's bathroom.

Scritto da: Woody

Great faucet except...

Purchased 3 of these in brushed nickel for bathroom remodels. Nice finsh, easy installation. Only drawback is that they water spot and with the flat handle it is disappointing to have to continually wipe off. Expected more considering the price.

Scritto da: Bernard

Nice faucet, but perhaps too shiny.

We got this faucet in the shiny chrome version rather than the brushed look. While it looks great when clean and dry, we have found that it must be wiped off after almost every use to keep it looking good, since water tends to splash on it when it is used. Otherwise it works just fine.

Scritto da: Alice Watkins

New Update

Quiet and easy to use

Scritto da: Kelley Jordison

Nearly impossible to install

The most impossible faucet to install!!! Do not buy. The inexpensive brands have easy connections to water supply lines. You have to solder on connections for your water lines with this faucet to 3/8” copper lines!!! Ugh. Absolute nightmare. Then there are 3 mounting bolts you need to fasten and there isn’t enough space to get the nuts on.