Small Parts 0606ABSW Μεταλλική βίδα λαμαρίνας, ψευδάργυρη, εξαγωνική κεφαλή ροδέλας, κίνηση με σχισμή, τύπος AB, #6-20 Μέγεθος σπειρώματος, μήκος 3/8 (Πακέτο 100)

Brand:Small Parts

3.6/5

Ft
30.69

Η ψευδάργυρη βίδα λαμαρίνας με εξαγωνική κεφαλή ροδέλας και σχισμή κίνησης έχει σημείο τύπου ΑΒ για σχηματισμό σπειρωμάτων σε λεπτά μέταλλα πάχους μεταξύ 0,015 και 0,050 και κόντρα πλακέ εμποτισμένο με ρητίνη. Το σημείο Τύπου ΑΒ έχει την κωνική άκρη ενός σημείου Τύπου Α με τα νήματα σε λεπτότερη απόσταση ενός σημείου Τύπου Β. Ο χάλυβας χρησιμοποιείται συχνά σε εφαρμογές όπου η αντοχή είναι το κύριο μέλημα. Η επίστρωση ψευδαργύρου προσφέρει αντοχή στη διάβρωση και έχει αντανακλαστική εμφάνιση. Η εξάγωνη κεφαλή ροδέλας έχει έξι επίπεδες πλευρές που μπορεί να πιάσει ένα κλειδί για να περιστραφεί από το πλάι, επιτρέποντας τη χρήση όταν δεν υπάρχει χώρος πάνω από την κεφαλή για κατσαβίδι. Η φλάντζα λειτουργεί σαν ροδέλα για να αυξήσει την επιφάνεια έδρασης του συνδετήρα και να κατανείμει τη δύναμη σύσφιξης σε μεγαλύτερη περιοχή, μειώνοντας τη ζημιά στο υλικό που στερεώνεται. Η μονάδα με σχισμή έχει μια γραμμική υποδοχή για χρήση με οδηγό με επίπεδη λεπίδα. Οι βίδες από λαμαρίνα, ένας τύπος αυτοεπιπεδούμενης βίδας, έχουν σπειρώματα σε όλο το μήκος του στελέχους για κούμπωμα και στερέωση λεπτού υλικού. Το στυλ σημείου καθορίζει τον τύπο του υλικού στο οποίο μπορεί να χρησιμοποιηθεί η βίδα, όπως μέταλλο, ξύλο ή πλαστικό. Αυτές οι βίδες έχουν συνήθως μια αιχμηρή αιχμή που βοηθά στη διείσδυση στο υλικό.

Η μονάδα με σχισμή διαθέτει γραμμική υποδοχή για χρήση με οδηγό με επίπεδη λεπίδα. Η εξάγωνη κεφαλή πλύσης έχει έξι επίπεδες πλευρές που μπορεί να πιάσει ένα κλειδί από το πλάι σε εφαρμογές χαμηλού προφίλ και έχει μια φλάντζα για πρόσθετη επιφάνεια εδράνου για τη διανομή της δύναμης στο υλικό που στερεώνεται. Ο χάλυβας χρησιμοποιείται συχνά σε εφαρμογές όπου η αντοχή είναι το κύριο μέλημα και η επίστρωση ψευδαργύρου αντιστέκεται στη διάβρωση και έχει αντανακλαστική εμφάνιση. Το σημείο τύπου ΑΒ έχει κωνικό άκρο και σπειρώματα σε λεπτές αποστάσεις που είναι κατάλληλα για τη διαμόρφωση νημάτων σε λεπτά μέταλλα πάχους μεταξύ 0,015 και 0,050 και κόντρα πλακέ εμποτισμένο με ρητίνη.
Drive System Slotted
Exterior Finish Zinc
Head Style Flanged
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 0.38 inches
Item model number 0606ABSW
Manufacturer Small Parts
Material Steel

3.6

13 Review
5 Star
74
4 Star
16
3 Star
3
2 Star
4
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Zoomungus
Good for grip on ice
Great for shoes or boots in winter, no slippping on the ice. The heads fit a standard hex bit holder, so you can screw them in with an electric drill. Not so good was the quantity, there was less than fifty in the bag...
Scritto da: Bearsnob
Perfect for shoes on ice
Look up "screw shoes." It's a trick trail runners use in the winter for traction on ice and snow, but it works everywhere. Some screws are better than others. These go in without drilling pilot holes on most shoes. Took me less that 10 minutes to do a pair of slip-on walking shoes for my wife. Some screws can take an hour or so to accomplish the same thing.
Scritto da: steve greathouse
Work great for spikes in my work boots
These are slightly smaller for a light boot with short lugs, thy work perfectly for that purpose, heavier boot go up one size more
Scritto da: Wheelgunnut
These were exactly as advertised.
I used these in the soles of boots and in the Terra Grips over my rear tractor tires for ice traction. Makes a huge difference and by far the cheapest way that I could find to address those problems. All of the screws were good quality. Longevity likely won’t be long for the ones on the tractor, but they weren’t designed for this purpose.
Scritto da: Cristi DeDoes
Great traction in running shoes in winter
They work great to give me traction in my running shoes in the winter. And they don’t go through the shoe.
Scritto da: glenn cove
Metal screws installed on Boot Soles for Traction on Ice
I was impressed with the fact that that the Metal screws arrived in only four days and that the shipping was free. These screws are not available in the short 3/8? length that I required locally. I used them on the soles of my outdoor boots for traction on ice and snow. My yard was so slippery that I could barely get to the woodpile, but after installing the screws, it was no problem, even pushing a wheelbarrow full of wood uphill. Glenn Cove Sault Ste. Marie, Ont.
Scritto da: Brandt
Good for making homemade "screw shoes"
Used these on some running shoes for ice and snow traction. Perfect length for staying in the soles of the shoes... Without being too long to end up in the soles of my feet.
Scritto da: Jon M
Great for screw shoes or boots
Used these to make screw-boots. Worked great, with plenty of traction on icy sidewalks. They are short enough that I didn't need to cut the tips off, but long enough to stay put. Try a drop of super glue on the threads if you have trouble with your screws working their way out.
Scritto da: DAVID GORDON
for running shoes to grip on ice
I am giving it 5 star as there is nothing wrong with the screws. If using them for running shoes as traction spikes make sure the midsole is thick enough at the ends. Works fine with wellies and thick soled footwear. This is typical, when you do something yourself you find out for real. The idea to make ice spikes for running shoes....on deeply studded shoes like Walshes, this does not work. If you just do roads and have flat soled shoes, maybe. When a mrf makes a running shoe with removable studs and swappable ones...that will be the answer. Hob nails were a neat solution but were shunned from the 1960s as they scratched up the rocks.
Scritto da: D. Auclair
Nice for winter running shoes
These screws are perfect for Saucony trail running shoes that accept screws on the outsole like the Mad Rivers and Peregrines. No slipping on ice.
Scritto da: Amazon Customer
Solid choice for winter trail running
Easy to screw in to old running shoes. Good grip on ice. 4 trail runs on them so far and none have come out. Shoes feel no different. I used 5 screws/shoe. I highly recommend this DIY.
Scritto da: Trevor Olson
Worth it for shoe spicks.
I use them to spike my running shoes in the winter. I go through 200 of these in a winter. We'll worth it!!
Scritto da: Shadow
excelent product
perfect

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array