Hopkins 11143374 Plug-in Simple Vehicle Wiring Kit

Brand:Hopkins Towing Solutions

3.4/5

Ft
82.33

Ως το νούμερο ένα εμπορικό σήμα στη ρυμούλκηση ηλεκτρικών προϊόντων, η Hopkins Towing Solutions παρέχει στους καταναλωτές καινοτομία, ανθεκτικότητα και απόδοση για περισσότερα από είκοσι χρόνια. Το Plug-In Simple Vehicle Wiring Kit της Hopkins σάς παρέχει 4 επίπεδους συνδέσμους για το τρέιλερ σας και όλα τα απαραίτητα αξεσουάρ τοποθέτησης. Απλώς αποσυνδέστε την εργοστασιακή καλωδίωση του οχήματός σας και συνδέστε το κιτ καλωδίωσης οχήματος Hopkins για γρήγορη και εύκολη εγκατάσταση. Η Hopkins Towing Solutions προσφέρει μια ποικιλία λύσεων ρυμούλκησης, συμπεριλαμβανομένων κιτ καλωδίωσης οχημάτων, προσαρμογείς, βύσματα σύνδεσης οχημάτων και ρυμουλκούμενων, αποσχιστικών συστημάτων και πολλά άλλα. Σήμερα, περισσότερο από το 40 τοις εκατό των πωλήσεων της κατηγορίας λιανικής προέρχεται μόνο από τις καινοτομίες Hopkins.

Χρησιμοποιεί συνδέσμους OEM που δημιουργούν ακριβή εφαρμογή και μέγιστη προστασία από τις καιρικές συνθήκες. Εξοπλισμένο με ακροδέκτη δακτυλίου οδοντωτής ακμής για τη δημιουργία καλής γείωσης όπου ισχύει. Περιλαμβάνει διηλεκτρικά γράσα ακροδεκτών και καλύμματα σκόνης για την προστασία των ακροδεκτών από τη διάβρωση. Οι λειτουργίες καλωδίων εκτυπώνονται απευθείας στο καλώδιο, για εύκολη αναγνώριση. Διαθέτει υποδοχές Original Equipment Manufacturer (OEM) για τέλεια εφαρμογή, ανθεκτική στις καιρικές συνθήκες. Δεν απαιτείται κόψιμο ή μάτισμα - απλώς αποσυνδέστε την εργοστασιακή καλωδίωση και συνδέστε το κιτ καλωδίωσης Hopkins.
Brand Hopkins Towing Solutions
Brand ‎Hopkins Towing Solutions
Country of Origin ‎Mexico
Customer Reviews 4.4 4.4 out of 5 stars 96 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior ‎Smooth
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH 6.5 x 4.13 x 3.56 inches
Item model number ‎43374
Item Weight 0.84 Pounds
Item Weight ‎13.4 ounces
Manufacturer ‎Hopkins Towing Solution
Manufacturer Part Number ‎43374
Material Polyvinyl Chloride
Model ‎43374
Product Dimensions ‎6.5 x 4.13 x 3.56 inches

3.4

8 Review
5 Star
74
4 Star
9
3 Star
6
2 Star
2
1 Star
8

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: RubyDApple
I used this for my 2004 4Runner V8
Worked great, easy to install
Scritto da: Gavin
exactly what it says
Plugged in to the factory Toyota/Lexus plugs.
Scritto da: Flyboy
Not exact fit - but works
I specifically purchased this as it was stated to fit my year of Toyota 4Runner. The electrical connections fit 100%. The mounting did not fit the original. It took a fair amount of drilling on the included mounting bracket to achieve an acceptable fit. Used it less than a handful of times. Worked.
Scritto da: Rod Harrison
Mounting this on a Lexus GX470 is a problem
This plugged up easily to my 2009 Lexus GX470, so that part was good. The bad -- the mounting bracket is quite flimsy, and would not hold the plug steady enough to push a 7 pin connector into it. I have not yet found a way to securely mount it, and will have to come up with some rigged less-than-elegant solution. On a related issue, when I plugged in, the trailer lights/brakes did not work at all. It turns out that this wiring plug is only part of what is needed to get a GX 470 to tow a trailer. Besides the hitch, which is obvious, you need to make sure that your GX470 was wired from the factory for towing, which includes a transmission oil cooler. There are some needed relays that have to be installed as well. It would have been great if there had been something in the instructions about this, since it is made specifically for these types of Toyota products.
Scritto da: Doug A.
Sold as a plug-n-play factory replacement, it's really only ...
Sold as a plug-n-play factory replacement, it's really only partially so. The electrical connectors match the factory connectors on my '08 4Runner but the mechanical mounting of the connector isn't even close. The bracket is a simple 90 degree mounting that even if you drilled the holes in the truck's trailer harness connector location or even tried to mount to the metal bumper underneath, the flip open cover would hit the plastic bumper cover. I was not willing to cut the bumper cover to make this work so I returned it. Other possibilities to make this work would be to use some standoffs in the mounting but that would likely make the connector unstable especially since the connector is a much tighter fit than the factory connector, at least for my trailer. You could also fab some sort of adapter to go between the new connector or mounting bracket and the truck's mounting points but I didn't want to take the time and effort for something that was supposed to be plug-n-play.
Scritto da: Martins
You will need to mount it on your own original holes domt line up with new bracket
It plugged right in, had to get creative for mounting it and drill new holes in the mounting brack but it worked out good!
Scritto da: Amazon Customer
Fits GX470
The plugs and harness fit perfectly. Has 7way and 4way plugs built in, so no need for an adapter. The metal bracket will work but I used zipties and a heavy duty velcro strap to better hide the harness under the hitch receiver.
Scritto da: maciej w.
Very good stuff and service!!!
????

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array