HHIP 3900-4630 Άμεση τοποθέτηση Self Centering Scroll Chuck, 3-Jaw, Type 01, 10 Diameter 10 Chuck Dia D1-5 To Fit Spindle

Name: HHIP 3900-4630 Άμεση τοποθέτηση Self Centering Scroll Chuck, 3-Jaw, Type 01, 10 Diameter 10 Chuck Dia D1-5 To Fit Spindle
Brand: HHIP
SKU: 0769053025353
Price: 1158.22 HUF
Availability: InStock

Brand:HHIP

3.3/5

Ft
1158.22

Τσοκ τόρνου HHIP 10 D1-5 3-Jaw Camlock ~ Τσοκ άμεσης τοποθέτησης με μύτη camlock. ~ Το σώμα είναι κατασκευασμένο από υψηλής ποιότητας ημι-ατσάλι. ~ Οι άνω σιαγόνες 2 τεμαχίων είναι αναστρέψιμες. ~ Αυτοκεντριζόμενες σιαγόνες που είναι σκληρυμένες και αλέθονται με ακρίβεια. ~ Περιλαμβάνεται κλειδί τσοκ τόρνου. ~ Το βάρος είναι 75 λίβρες. Περιλαμβάνονται ~ 6 τεμάχια καρφιού διαμέτρου 3/4. ~ Το μέγιστο RPM είναι 1.600. ~ T. I. R. είναι . 004.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0769053025353

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Ανταλλακτικά και αξεσουάρ τόρνου, Αξεσουάρ,

Παρέχεται κλειδί τσοκ τόρνου. Αυτοκεντριζόμενες σιαγόνες, σκληρυμένο και ακριβές έδαφος. Οι άνω σιαγόνες είναι αναστρέψιμες. Σώμα από ημιατσάλι υψηλής ποιότητας. Τσοκ απευθείας τοποθέτησης με μύτη camlock.

Brand	HHIP
Compatible Devices	Lathe
Included Components	CHUCK
Item model number	3900-4630
Item Weight	75 Pounds
Manufacturer	ABS Import Tools, Inc.
Material	Alloy Steel
Product Dimensions	14 x 10 x 16 inches; 75 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Another Old Guy

Runout, the video tells all

The media could not be loaded. This D1-4 HHIP chuck is mounted on my 14 x 40 Polomco lathe. After cleaning the goop off and adjusting the cam-lock pins, I chucked a precision-ground center in the jaws and was really surprised when it ran only 0001 - .0002” out (see video). Overall, I am very happy with this purchase, it’s a keeper! The quality was way better than I expected, the finish is nice, no de-burring necessary and it scrolls smoothly and locks evenly. So far, I have not found anything I am dissatisfied with, I’m just hoping the nice tolerances stay like they are...

Scritto da: Joseph Cook

TIR

Excellent chuck less than .001 run out. I just installed this 6 Inch 3 jaw chuck on my lathe and it will hold less than .001 TIR. This is the best 3 jaw I own now. I compare it to Bison or Buck at less than half the price. I just hope it keeps the tolerances.

Scritto da: West

Good buy

I purchased this chuck to replace the 6” on my Grizzly G4003G lathe. I wasn’t expecting much but it turned out to be a nice accurate chuck. The body of the chuck has less than .002 runout. Grabbing on a precision bar I’m getting .001 at he jaws and .002 about 6” out. I’m getting no vibrations when the machine is spinning at its max rpm. The chuck bore will accept a 2.5” bar. The pictures show it compared to the 6” chuck that came on my lathe. I’m really happy with this chuck.

Scritto da: Some guy

Shipping speed that defies logic

The product is exactly what they say it is and works fine. What was so amazing is that I had this shipped from USA to Thailand and it literally showed up in 3 days. Cleared customs and I was even refunded the additional customs fees I paid as a deposit. How they got it here so fast for that price is unbelievable.

Scritto da: Ivan Hdez

I need to install the old one because this chuck dont work

The media could not be loaded. Terrible

Scritto da: Zina Deretsky

.012" NOT .003" runout as advertised

Major revision to my former review. I blued the fit of the chuck to the spindle taper. It's terrible. One thin ring all the way around near the end. I also got after the chuck with a dial indicator. The chuck jaw lands not only aren't perpendicular to the axis of rotation, they all have DIFFERENT angles at which they aren't perpendicular to the axis of rotation. I can fix a lot of things, but I can't fix the chuck jaw lands. I've ordered a replacement, in the hope this was a one-off. We'll see how it turns out.

Scritto da: Dean D.

Worth every penny

I am very pleased with this 8" Chuck, so much so that I immediately ordered the 6" version the day this one arrived, runs very true compared to the 6" I bought the year before last. Here's hoping the 6" is as good as this one!!!!