Heath Zenith HZ-4192-BK Φανάρι από χυτό αλουμίνιο έξι όψεων, μαύρο με λοξότμητο γυαλί

Brand:Heath/Zenith

3.4/5

Ft
120.48

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Heath Zenith HZ-4192-BK Φανάρι από χυτό αλουμίνιο έξι όψεων, μαύρο με λοξότμητο γυαλί AMAZON.COM Τα φώτα που ενεργοποιούνται με κίνηση είναι βολικά και ενεργειακά αποδοτικά, αλλά μπορεί να είναι λίγο ογκώδη και δύσκολα να τα βλέπει κανείς Ο δρόμος είναι καλός, αλλά δεν θα θέλατε να βάλετε ένα στη βεράντα σας. Εκτός κι αν είναι ένα από τα φώτα βεράντας του Heath Zenith, δηλαδή. Αυτά τα προϊόντα σας προσφέρουν το καλύτερο και των δύο κόσμων, συνδυάζοντας την ενεργοποίηση κίνησης και τον παραδοσιακό σχεδιασμό με φως εξωτερικού χώρου. Το SL-4192 είναι ένα φανάρι τοίχου έξι πλευρών που περιλαμβάνει μια κρυφή συσκευή ανίχνευσης κίνησης που ανιχνεύει κίνηση σε 180 μοίρες ακτίνα έως και 30 πόδια. Μπορείτε να ρυθμίσετε τον χρονοδιακόπτη φωτός σε ένα, πέντε ή δέκα λεπτά και ο ίδιος ο αισθητήρας μπορεί να ρυθμιστεί για να σας προσφέρει περισσότερη ή λιγότερη ευαισθησία (έτσι δεν ανάβει κάθε φορά που περνάει ένα αυτοκίνητο). Η ανθεκτική στις καιρικές συνθήκες κατασκευή από αλουμίνιο σημαίνει ότι θα φαίνεται καλό και για λίγο. Αυτό το μοντέλο διαθέτει επίσης φωτισμό Dual Brite, που σημαίνει ότι μπορείτε να το χρησιμοποιήσετε για φωτισμό χαμηλού επιπέδου εκτός από το εφέ πλήρους φωτός που έχετε με την κίνηση -δραστηριοποίηση. Ένας περιλαμβανόμενος χρονοδιακόπτης σάς επιτρέπει να ρυθμίσετε τη λειτουργία χαμηλού φωτισμού για τρεις ώρες, έξι ώρες ή το σούρουπο μέχρι την αυγή (ένα αυτόματο φωτοκύτταρο απενεργοποιεί τη μονάδα στο φως της ημέρας). Μπορείτε επίσης να ανάψετε και να σβήσετε το φως κατά βούληση μέσω της χειροκίνητης παράκαμψης που τοποθετείται σε έναν υπάρχοντα διακόπτη εσωτερικού χώρου. Εάν θέλετε να εξοικονομήσετε λίγα χρήματα στον εξωτερικό φωτισμό εγκαθιστώντας έναν ανιχνευτή κίνησης, αυτή είναι μια εξαιρετική επιλογή που κέρδισε δεν φαίνεται παράταιρο. Απαιτείται ένας λαμπτήρας μεσαίας βάσης έως 100 watt (δεν περιλαμβάνεται). --Josh DettweilerΤι υπάρχει στο περίβλημα του BoxLamp, ανιχνευτής κίνησης ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΙΚΟ Φανάρι 6 όψεων Die-Cast με λοξότμητο γυαλί Δείτε περισσότερα

Δεν υπάρχουν διαθέσιμες μονάδες
Μαύρο χυτό αλουμίνιο με λοξότμητο γυαλί. Διαστάσεις: 7w x 9d x 17,3h. Κρυφός αισθητήρας κίνησης 180 μοιρών. Εύρος ανίχνευσης έως και 30 πόδια και ρυθμιζόμενη ευαισθησία. Φωτισμός δύο επιπέδων: χρονομετρημένος φωτισμός έμφασης χαμηλού επιπέδου ή φωτεινός φωτισμός ασφαλείας πλήρως. Για οικονομικό και βολικό φωτισμό εξωτερικού χώρου. Φανάρι 6 όψεων που ενεργοποιείται με κίνηση.
Assembled Height ‎17.3 inches
Assembled Length ‎9 inches
Assembled Width ‎7 inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Heath/Zenith
Brand ‎Heath/Zenith
Collection ‎Alexandria
Color Sand Textured Black
Color ‎Sand Textured Black
Country of Origin China
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 1,075 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish Type Black
Finish types ‎Black
International Shipping This item can be shipped to select countries outside of the U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Is Discontinued By Manufacturer ‎No
Item model number HZ-4192-BK
Item model number ‎HZ-4192-BK
Item Package Quantity ‎1
Item Weight ‎14.4 ounces
Light Source Type Incandescent,Compact Fluorescent
Manufacturer Heath Zenith
Manufacturer ‎Heath Zenith
Material Aluminum
Material ‎Aluminum
Number of Lights ‎1
Part Number ‎HZ-4192-BK
Plug Format ‎A- US style
Product Dimensions 9 x 7 x 17.3 inches; 14.4 Ounces
Product Dimensions ‎9 x 7 x 17.3 inches
Shade Color ‎Black
Shade Material ‎Glass
Special Features ‎Adjustable
Style ‎Country - Cottage
Type of Bulb ‎Incandescent,Compact Fluorescent
Wattage ‎100 Watts
Wattage ‎100.00

3.4

5 Review
5 Star
66
4 Star
16
3 Star
8
2 Star
3
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Kevinkar
Good product but switches do corrode over time
I've purchased several of these over the 20 years I've owned my home. They generally work well and, once you install and set them up, they are a "set and forget" product. Except for one thing. That one thing is that the switches they use in these lights do tend to corrode in place over time and if you ever have to change settings on them the switches are locked into place. Even when I get them un-stuck, moving them is still difficult and I've had to replace the entire unit each time that happens since they are now stuck ON all the time or not set the way I want them. They are not super cheap so replacing two at a time is more money than I really want to spend especially since the fixture still works. It's just the switches that have gone bad. This has happened several times over the years so it's not an isolated incident. I even complained to the manufacturer and they admitted this is a problem and are working on it. They sent replacements even though I was out of warranty too so they know this is a problem. It's a decent product with that one switch flaw. If they get that to be more robust it would easily be a 5 star product though I do keep buying them anyway! I recommend them but definitely want you to know you'll have to watch those switches and spray them with contact cleaner on a regular basis and move them back and forth to prevent them from locking in place.
Scritto da: Michael
Perfect
Perfect
Scritto da: Amazon Customer
Model change
Somehow the original design needed the older incandescent bulbs because it pulled current through the bulb to run but not enough to turn it on. LEDs just don't let enough through to run it well. I tried using a 100watt equivalent (15watt actual) and mostly they would work but they would also get random flickers which was annoying and ugly. Since then I've cut out the internal motion stuff and made my own controls since there are 7 of these lights together now. Even with the original wiring using the red wire it would simply make all 7 lights flicker the same way. HOWEVER, this description says these are cast aluminum and they used to be but are now a cheaper pressed sheet metal. Updated descriptions don't say cast aluminum but say 'durable metal' to sort of hide it but the last 4 from Amazon or from big box stores are all going to the new version of pressed metal. Had to find old hardware stores to pick up the last 4 that I needed that were aluminum and were made more heavy duty. This Amazon description has not been updated yet.
Scritto da: Millertime
Excellent motion detection light that works with LED lights!
I installed motion detection lights when I purchased my house in 1994 and they have failed so I needed to replace them with a reliable light that worked the same. I read the previous reports about how others have tried to use LED lights in this light where they didn't use a proper bulb. I have used a high quality dimmable LED bulbs where they work reliably in dimmable fixtures. I use the GE brand sold at Target and other various stores. The footprint of the light is large where I had to chisel a significant larger area on the rock facia where it was mounted on. Stripped the wires back about an inch to provide a solid connection with the wire nuts. I can't stress enough to purchase a high quality dimmable LED bulbs to use where the cheap ones can cause the failure of the circuitry and disable the functionality of the light. The standard settings for the motion detection is too sensitive where anyone who moves around 30 feet away triggers the sensor and illuminates all the lights for about 90 seconds. I really want it to trigger when movement is detected around 12 feet in a perimeter that I have set.
Scritto da: Bermuda Shorts
Great if you use a modified installation
After reading the reviews and examining the product, I realized that installing it using the supplied hardware wouldn't cut it. In order to fit the mounting bracket to my existing recessed single-gang electric box, I had to grind a small amount off the ends of the mounting bracket. For a flush-mount box, this won't be necessary. #6-32 screws are used to attach the mounting bracket to the wall box. I re-tapped the holes in the section of the mounting bracket for the long bolts, which attach to the body of the lantern, to #8-32 and replaced the original lantern mounting bolts with stainless steel #8-32 bolts. I used #8-32 brass knurled nuts to secure the lantern body to the bracket. The holes in the mounting bracket don't line up perfectly with the pass-throughs in the aluminum lantern body. This would make fitting the mounting bolts through the body very difficult while propped-up on a ladder. I carefully adjusted the bends in the mounting bracket to lengthen it until the holes lined-up. I drilled out the pass-through holes in the lantern body to accept the #8-32 bolts. Do not use LED or compact fluorescent bulbs. Using vintage-style incandescent bulbs, in the DualBrite mode, the lantern emits a beautiful glow and then switches to a bright light when triggered by movement in front of the lantern for the period of time you selected.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array