Greenlee 35179 ΜΟΝΑΔΑ ΠΑΝΤΣ ΝΟΚΑΟΥΤ 32,5 χλστ

Brand:Greenlee

2.5/5

Ft
130.09

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ PUNCH, DIE, Draw STUD ΠΕΡΙΕΧΟΜΕΝΑ. 10 ΜΕΤΡΟ ΧΩΡΗΤΙΚΟΤΗΤΑ ΜΠΑΛΟΥ ΧΑΛΥΒΑ; 1. ΜΕΓΕΘΟΣ ΤΡΥΠΗΣ 28 ΙΝΤΣΩΝ. ΤΥΠΟΣ ΣΤΡΟΓΓΥΛΟΥ ΔΙΑΤΡΟΠΗΣ; SLUG-BUSTER[R] BRAND; ΕΦΑΡΜΟΓΗ PUNCH ΜΑΛΚΟΣ ΧΑΛΥΒΑΣ, ΑΛΟΥΜΙΝΙΟΥ, FIBERGLASS, ΠΛΑΣΤΙΚΟ; ΧΡΗΣΙΜΟΠΟΙΕΙΤΑΙ ΣΕ ΜΠΑΤΑΡΙΑ/ΥΔΡΑΥΛΙΚΟ/ΚΑΤΣΑΝΤΕΣ/ΧΕΙΡΟΚΙΝΗΤΟ ΟΔΗΓΟ ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Τα Greenlee Slug-Busters μπορούν να χρησιμοποιηθούν σε μαλακό χάλυβα έως και 10 gauge (3,5 mm). Εφαρμογή: Τρυπήστε απαλό χάλυβα, αλουμίνιο, υαλοβάμβακα και πλαστικό. Λειτουργεί με μπαταρία, υδραυλικό, καστάνια ή χειροκίνητα προγράμματα οδήγησης.

Δεν υπάρχουν διαθέσιμες μονάδες
Ύψος συσκευασίας: 4,8. Πλάτος συσκευασίας: 1,6. Μήκος συσκευασίας: 6.2. Χώρα προέλευσης: Κίνα.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Greenlee
Brand ‎Greenlee
Color Silver, Black
Color ‎Silver, Black
Country of Origin ‎China
Customer Reviews 3.4 3.4 out of 5 stars 3 ratings 3.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎35179
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10 x 10 x 12 inches
Item Dimensions LxWxH ‎10 x 10 x 12 inches
Item model number ‎35179
Item Package Quantity ‎1
Item Weight 0.99 Pounds
Item Weight ‎0.99 Pounds
Item Weight ‎15.8 ounces
Manufacturer ‎Greenlee
Material Alloy Steel
Material ‎Alloy Steel
Operation Mode ‎Manual
Part Number ‎35179
Product Dimensions ‎10 x 10 x 12 inches
Sheet Count ‎30
Size ‎32.5 mm
Warranty Description ‎Goods manufactured by Greenlee Textron will be free from defects in workmanship and material for a period of one year from the date of user purchase, provided such goods are installed, operated, used and maintained in accordance with Greenlee's written instructions.

2.5

1 Review
5 Star
61
4 Star
0
3 Star
0
2 Star
0
1 Star
39

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Tenther1
I had to punch some holes in 16 gauge sheet ...
I had to punch some holes in 16 gauge sheet metal. I had 3/4" pipe with a 3/4" to 1/2" female adaptor. The hex that had to go through the holes was as close to I.280" as possible. The pipes just cleared. The slug -splitting feature is most welcome; there is no need to pry or pull off the slug as in the past. The ball bearing attached to the draw stud makes the wrench turning go very smoothly.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array