Πύλες 38001 Τροχαλία ρελαντί κίνησης ιμάντα DriveAlign/Tensioner

Name: Πύλες 38001 Τροχαλία ρελαντί κίνησης ιμάντα DriveAlign/Tensioner
Brand: Gates
SKU: 0072053415254
Price: 42.72 HUF
Availability: InStock

Brand:Gates

3.7/5

Ft
42.72

Οι τροχαλίες DriveAlign Idler παρέχουν εφαρμογή ποιότητας OE σε επιβατικά αυτοκίνητα και ελαφρά φορτηγά, λειτουργώντας ως κλειδωμένη τροχαλία τάνυσης κεντρικής, αυτόματη τροχαλία εντατήρα ιμάντα ή τροχαλία ρελαντί.

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 0072053415254

Κατηγορίες Αυτοκίνητα, Ανταλλακτικά, Ζώνες, Σωλήνες & τροχαλίες, Τροχοαλυσίδες, Τροχοφόρες τροχαλίες Ιντλερ,

Τα ρουλεμάν Premium εξαλείφουν τον θόρυβο των ρουλεμάν. Τα ρουλεμάν πληρούν ή υπερβαίνουν τα πρότυπα OE με απαιτήσεις ταχύτητας και φορτίου για συγκεκριμένες εφαρμογές, για να αντέχουν σε υψηλές θερμοκρασίες κάτω από την κουκούλα. Ταιριάζει με ποιότητα OE για σχεδόν κάθε οικιακό ή εισαγόμενο όχημα στο δρόμο σήμερα. Κατασκευασμένο για να διαρκεί με ανώτερη αντοχή στη βρωμιά, το αλάτι, τα χημικά και άλλους ρύπους κάτω από την κουκούλα. Χάλυβας και θερμοπλαστική κατασκευή σχεδιασμένη για αυστηρές κατασκευαστικές ανοχές για υψηλή αντοχή και ποιοτική απόδοση. Υλικό: ατσάλι.

Brand	‎Gates
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 806 ratings 4.6 out of 5 stars
Exterior	‎Machined
Is Discontinued By Manufacturer	‎No
Item model number	‎38001
Item Weight	‎10.2 ounces
Manufacturer	‎Gates
Manufacturer Part Number	‎38001
Model	‎DriveAlign Belt Drive Idler/Tensioner Pulley
OEM Part Number	‎1L2Z8678AB, 1L3Z8678AB, 6L2Z6C348A, F75Z8678AB, F7CZ6C348AA

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: William Kerrigan

check the Fitment

works as expected

Scritto da: Landlocked in the sandhills

Idler roller

Didn't include spacers nor bolt, but that wasn't mentioned. So used originals. Other than that, bolted right up. Smoother rotation. Used 13mm socket with flex ratchet (not included).

Scritto da: Eric White

Good pulley. Good price

Item as described.

Scritto da: D.M.

2000 Ford Ranger 2.5L... it fits...

Install was simple. 5 minutes to install. Perfect fit using the OEM hardware from my Ford Ranger.

Scritto da: LP

Great OEM replacement.

I replaced the pully on a 2002 Ford Ranger. The pully looked like an exact match, and was a perfect replacement. It is a better price then going OEM from Ford.

Scritto da: jgarcia

Not impressed

Pulley looked like it was used but could be an issue from the factory. The bearing isn't the best quality. I should have purchased an OEM pulley. Will see how long it will last.

Scritto da: doctor don

Easy to replace once the serpentine belt is off the tensioner

In the 2002 Mercury Sable, the clearance between the frame and the tensioner is not enough for most sockets and simple wrenches. So I ground off sides of the tool I bought for moving tensioner pulleys. Then I removed the tension on the belt and moved the belt off the alternator pulley and held it up with a small bungee cord (I did not want to have to route the belt through the pulleys when the clearance is barely an inch and I plan to replace the 11 year old belt in the future). The original bolt and washers that were with the old pulley were reused. No more wobble due to failing bearings. It has been only 2 weeks since this was replaced, but so far so good.

Scritto da: Beau-Tech

Fit My 2011 Ford Ranger, 4.0L, 4x4

Works well. Nice and quiet.

Scritto da: Glenn Cattani

Perfect OEM/stock replacement.

This was exactly what I needed to replace an OEM/stock pulley for a 4.8 / 5.3 liter chevy/GM. Note that I kept the dust cover even though the instructions indicated that it wasn't required. I'd buy it again.

Scritto da: Steve Roberge

Good fit

Install two of them to replace OEM pulleys on my f150 2010. Perfect fit and seems good quality for the price. Look forward to see how much time they will last.

Scritto da: Lafleur

Similaire à l’original

Mon Ranger

Scritto da: Jay

good

good