Frigidaire 316489406 Γνήσιο OEM Bake Igniter for Ranges

Brand:FRIGIDAIRE

3.6/5

Ft
181.36

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Το υψηλής ποιότητας Frigidaire Bake Igniter (316489406 ) ανάβει τον καυστήρα ψησίματος. Το Bake Igniter είναι για φούρνους με αέριο σε σειρές και αντικαθιστά τα 1615396, AH2581803, EA2581803, PS2581803. Λάβετε υπόψη ότι συνιστάται η χρήση εξοπλισμού ασφαλείας και η αποσύνδεση της συσκευής από όλες τις υπηρεσίες κοινής ωφέλειας πριν από οποιαδήποτε επισκευή ή επισκευή. Ανατρέξτε στο εγχειρίδιο κατόχου σας για να επιβεβαιώσετε τους αριθμούς ανταλλακτικών και για οδηγίες, καθώς ορισμένες επισκευές απαιτούν εκπαιδευμένο σέρβις για να ολοκληρωθούν. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Αυτό είναι ένα γνήσιο ανταλλακτικό. Ο αριθμός μοντέλου και το όνομα για το παρακάτω είδος είναι: Frigidaire (FRIGB) 316489406 Oven Igniter

Με τη Frigidaire, μπορείτε να είστε σίγουροι ότι θα λάβετε αβίαστα χαρακτηριστικά και ποιοτικά υλικά, δίνοντάς σας την υψηλότερη ποιότητα απόδοσης για όλη τη διάρκεια ζωής των συσκευών σας. Το υψηλής ποιότητας Frigidaire Bake Igniter αντικαθιστά τα 1615396, AH2581803, EA2581803, PS2581803. Το Frigidaire 316489406 είναι για φούρνους με αέριο σε σειρές. Το Frigidaire Bake Igniter αναφλέγει τον καυστήρα ψησίματος. Το Frigidaire Bake Igniter είναι ένα γνήσιο ανταλλακτικό OEM (Original Equipment Manufacturer) σχεδιασμένο και κατασκευασμένο σύμφωνα με ακριβείς προδιαγραφές.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.6 4.6 out of 5 stars 43 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎316489406
Item Package Quantity ‎1
Item Weight ‎4 ounces
Manufacturer ‎Frigidaire
Part Number ‎316489406
Product Dimensions ‎6 x 4 x 2.5 inches

3.6

8 Review
5 Star
78
4 Star
11
3 Star
6
2 Star
0
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Tony C
Fixed the issue with my oven
My oven was preheating when we turned it on even though the igniter was getting hot. I replace the original igniter with this and it fixed the issue. The only thing I would recommend is to save the original one until you have this one installed in case the mount does not fit. That is the reason why I gave it four stars as the it is supposed to be a direct replacement but i did have to swap the mounting bracket.
Scritto da: seattleguy
Works for me. Took about 1 hour to replace, including moving out oven and putting back onto place.
The top oven of our double oven would not go above 100 degrees. I researched this and found that it was likely the bake igniter. I watched some youtube videos to learn how to replace it and decided to go ahead and try. It was as straight forward as I had expected. The most difficult thing for me to replace this part, for my oven (Kenmore model #790.78013002), was that it took some effort to pull the existing igniter out after removing the 2 screws that were holding it in place. This is because a) it required that I take off the back panel to undo the connection. b) Once I had the panel off and located the connection and disconnected it, it took a bit of effort to pull the wire out from inside the oven. There was some insulation in the way that I had to move over. c) i had to push the connector from the new igniter, through the back of the oven so I could connect it. Once it was connected, putting all screws back in place was easy. This new part solved the problem that I was having and now will heat up again.
Scritto da: Brian Blazevich
Fit Kenmore Elite Perfectly
I have bought cheaper versions that needed special installation. This one required no modification to shield nor wiring. Connector fit perfectly.
Scritto da: DKRemnant
As described works great, excellent shipping
As described works great, excellent shipping
Scritto da: John Galt
Absolutely perfect match!
The wires to the coupling must be cut and spliced back together. The opening in the oven chamber is not large enough for the coupling to pass through. There is a youtube video to assist with this process. Real simple but requires butt couplings or wire nuts.
Scritto da: Lisa
Perfect fit.
Cords and plugs are just right. I replaced both upper and lower igniters in the upper oven.
Scritto da: Harry Ng
Easy fix for Kenmore Elite
Easy replacement for my Kenmore Elite double oven. I didn’t have to cut any wires, simple plug!
Scritto da: Alan Wiltse
It works
The unit works just fine although I was expecting one that looked just like the picture... with a connector. It came with just bare wires and wire nuts. I cut the old ones wires above the connector so I could keep it just in case I had to replace it again with one that did have the connector on it.

Σχετικά προϊόντα

hot
True 883099 Latex Cord 2 Ring
0.1/5

Ft 86.67

True 883099 Latex Cord 2 Ring
0.1/5

Ft 86.67

hot

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array