Φρόυντ 99-444: 1-3/16 (δια.) Μύτη κουπαστής με 1/2 στέλεχος, 1/2 μεγάλη ακτίνα

Brand:Freud

3.9/5

Ft
102.79

Freud Perma-SHIELD Coating. Τρίβει σκληρό ή μαλακό ξύλο για να παράγει καλούπωμα υψηλής ποιότητας. Χρήση με δρομολογητές CNC ή επιτραπέζιους δρομολογητές. Αντιστοιχίστε με τον Freud 99-450, 99-452 ή 99-027 (πωλείται χωριστά) για το κορυφαίο προφίλ. Μύλος όμορφα προφίλ κιγκλιδώματος σε οποιοδήποτε είδος ξύλου. Προδιαγραφές: Διάμετρος ρουλεμάν. 5/8, Large Radius 1/2, Number of Cutters 2, Total Dia. 1-3/16, Συνολικό μήκος 3-1/2, Σανκ Διά. 1/2, Μικρή Ακτίνα 3/8, Ύψος Καρβιδίου 1-1/2.

EAN: 0008925386155

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης,

Freud Perma-SHIELD Coating. Τρίβει σκληρό ή μαλακό ξύλο για να παράγει καλούπωμα υψηλής ποιότητας. Χρήση με δρομολογητές CNC ή επιτραπέζιους δρομολογητές. Αντιστοιχίστε με τον Freud 99-450, 99-452 ή 99-027 (πωλείται χωριστά) για το κορυφαίο προφίλ. Μύλος όμορφα προφίλ κιγκλιδώματος σε οποιοδήποτε είδος ξύλου. Προδιαγραφές: Διάμετρος ρουλεμάν. 5/8, Large Radius 1/2, Number of Cutters 2, Total Dia. 1-3/16, Συνολικό μήκος 3-1/2, Σανκ Διά. 1/2, Μικρή Ακτίνα 3/8, Ύψος Καρβιδίου 1-1/2.
Brand Freud
Item Weight 0.35 Pounds
Material Blend
Size One Size

3.9

6 Review
5 Star
87
4 Star
7
3 Star
6
2 Star
0
1 Star
0

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: IowaBill
Good, but not perfect.
I wish they had a 2nd bearing above the cutter or that the top of the cutter tapered to zero rather than to 1/16". This bit is so long and it is such a challenge to run the router on the narrow edge of the stock, that the 1/16" top edge of the cutter leaves its mark as it's very tough to not have the shaft ride along the wood. I used this for a deck handrail made from a 2x6, so that annoyance isn't as big a deal, but still bothered me.
Scritto da: Lee
Cuts exceptionally!
Used it for making handrails, may find other uses for it later.
Scritto da: Jo
Great product
Just plan good stuff. Worked great for my project
Scritto da: Kyle Garbutt
Five Stars
Worked great...I bought this bit to make finger grips for hand railings and it worked perfectly
Scritto da: Robert wilson
Five Stars
Right on! and here in one day
Scritto da: Ike
Careful with code compliance
Latest type II handrail codes require 5/16" depth for finger recess. This bit cuts 1 3/16" minus 5/8" bearing divided by 2 which isn't quite deep enough. Look for a min 1 1/4" diameter cutter.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array